Research Article
Quantitative Characteristics of Toxic Compounds According to the Solvent Type
Table 3
Instrumental setup for the analysis of target compounds (B, T, and MIT).
| (a) Carrier gas settings | Injection temperature | 250 | °C | Injection mode | Split | | Carrier gas | Helium (>99.999%) | | Pressure | 132.9 | kPa | Column flow | 2.41 | mL·min−1 (constant flow) | Purge flow | 3.0 | mL·min−1 | Split ratio | 20 | |
| (b) Gas chromatography (model: GC-2010, Shimadzu, Japan) | Column | Rtx-5MS (Shimadzu, Japan) (length: 60 m, diameter: 0.25 nm, and film thickness: 0.25 μm) | Oven setting | 40°C (4 min) ⟶ 145°C (15°C/min) ⟶ 285°C (70°C/min) (Total program time = 13 min) |
| (c) Mass spectrometry (model: GCMS-QP2010 ultra, Shimadzu, Japan) | Ionization mode | EI (70 eV) | | Ion source temperature | 250 | °C | Interface temperature | 250 | °C | TIC | 30∼500 | m/z | Scan speed | 1000 | |
|
|