Table of Contents Author Guidelines Submit a Manuscript
Journal of Advanced Transportation
Volume 2017, Article ID 9862949, 14 pages
https://doi.org/10.1155/2017/9862949
Research Article

A Novel Approach for Operating Speed Continuous Predication Based on Alignment Space Comprehensive Index

1School of Automobile, Chang’an University, Xi’an, China
2School of Traffic and Transportation Engineering, Key Laboratory of Smart Transport in Hunan Province, Central South University, Changsha, China
3College of Transportation Engineering, Tongji University, Shanghai, China

Correspondence should be addressed to Jinjun Tang; nc.ude.usc@gnatnujnij

Received 1 June 2017; Revised 18 September 2017; Accepted 30 October 2017; Published 12 December 2017

Academic Editor: Chunjiao Dong

Copyright © 2017 Ying Yan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Russo, S. A. Biancardo, and M. Busiello, “Operating speed as a key factor in studying the driver behaviour in a rural context,” Transport, vol. 31, no. 2, pp. 260–270, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Dell'acqua, M. Busiello, and F. Russo, “Safety data analysis to evaluate highway alignment consistency,” Transportation Research Record, no. 2349, pp. 121–128, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. J. L. Ottesen and R. A. Krammes, “Speed-profile model for a design-consistency evaluation procedure in the United States,” Transportation Research Record: Journal of the Transportation Research Board, no. 1701, pp. 76–85, 2000. View at Google Scholar · View at Scopus
  4. N. J. Garber, “The effect of speed, flow, and geometric characteristics on crash rates for different types of Virginia highways,” Virginia Transportation Research Council, vol. 1, pp. 10–15, 2000. View at Google Scholar
  5. German Road and Transportation Research Association, Guidelines for the Design of Roads, Berlin, 1984.
  6. J. Morrall and R. J. Talarico, “Side friction demanded and margins of safety on horizontal curves,” Transportation Research Record: Journal of the Transportation Research Board, pp. 145–152, 1994. View at Google Scholar
  7. Transportation of Ontario, Ontario Traffic Manual Book 7: Temporary Conditions, Ontario, 2014.
  8. Turner-Fairbank Highway Research Center.: Interactive Highway Safety Design Model, Federal Highway Administration, Mclean, 2003.
  9. R. Lamm, E. M. Choueiri, J. C. Hayward, and A. Paluri, “Possible design procedure to promote design consistency in highway geometric design on two-lane rural roads,” Transportation Research Record, no. 1195, pp. 111–122, 1988. View at Google Scholar · View at Scopus
  10. M. N. Islam and P. N. Seneviratne, “Evaluation of design consistency of two-lane rural highways,” Journal of Transportation of the Institute of Transportation Engineers, vol. 64, no. 2, pp. 28–31, 1994. View at Google Scholar
  11. J. McFadden and L. Elefteriadou, “Evaluating horizontal alignment design consistency of two-lane rural highways: development of new procedure,” Transportation Research Record, no. 1737, pp. 9–17, 2000. View at Google Scholar · View at Scopus
  12. R. A. Krammes et al., HorizoNtal Alignment Design Consistency for Rural Two-Lane Highways, Federal Highway Administration, 1994.
  13. A. Bucchi, K. Biasuzzi, and A. Simone, “Evaluation of design consistency: a new operating speed model for rural roads on grades,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1701, pp. 76–85, 2005. View at Google Scholar
  14. J. Tang, F. Liu, Y. Zou, W. Zhang, and Y. Wang, “An Improved Fuzzy Neural Network for Traffic Speed Prediction Considering Periodic Characteristic,” IEEE Transactions on Intelligent Transportation Systems, 2017. View at Publisher · View at Google Scholar · View at Scopus
  15. P. Perco, “Influence of the general character of horizontal alignment on operating speed of two-lane rural roads,” Transportation Research Record, no. 2075, pp. 16–23, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. A. A. Abdul-Mawjoud and G. G. Sofia, “Development of models for predicting speed on horizontal curves for two-lane rural highways,” Arabian Journal for Science and Engineering, vol. 33, no. 2 B, pp. 365–377, 2008. View at Google Scholar · View at Scopus
  17. Y. Yan, S. Zhang, J. Tang, and X. Wang, “Understanding characteristics in multivariate traffic flow time series from complex network structure,” Physica A: Statistical Mechanics and its Applications, vol. 477, pp. 149–160, 2017. View at Publisher · View at Google Scholar · View at Scopus
  18. K. Fitzpatrick, Design Speed, Operating Speed, and Posted Speed Practices, Transportation Research Board, 2003.
  19. D. R. Jessen, K. S. Schurr, P. T. McCoy, G. Pesti, and R. R. Huff, “Operating speed prediction on crest vertical curves of rural two-lane highways in Nebraska,” Transportation Research Record: Journal of the Transportation Research Board, no. 1751, pp. 67–75, 2001. View at Google Scholar · View at Scopus
  20. D. B. Fambro, K. Fitzpatrick, and C. W. Russell, “Operating speed on crest vertical curves with limited stopping sight distance,” Transportation Research Record: Journal of the Transportation Research Board, no. 1701, pp. 25–31, 2000. View at Google Scholar · View at Scopus
  21. G. M. Gibreel, S. M. Easa, and I. A. El-Dimeery, “Prediction of operating speed on three-dimensional highway alignments,” Journal of Transportation Engineering, vol. 127, no. 1, pp. 21–30, 2001. View at Publisher · View at Google Scholar · View at Scopus
  22. E. M. Choueiri, R. Lamm, J. H. Kloeckner, and T. Mailaender, “Safety aspects of individual design elements and their interactions on two-lane highways: international perspective,” Transportation Research Record, no. 1445, pp. 34–46, 1994. View at Google Scholar · View at Scopus
  23. J. Tang, F. Liu, W. Zhang, R. Ke, and Y. Zou, “Lane-changes prediction based on adaptive fuzzy neural network,” Expert Systems with Applications, vol. 91, pp. 452–463, 2018. View at Publisher · View at Google Scholar
  24. H. Gong and N. Stamatiadis, “Operating speed prediction models for horizontal curves on rural four-lane highways,” Transportation Research Record, no. 2075, pp. 1–7, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. X. H. Li and Z. K. Yao, “Vehicle fuel consumption prediction model,” Journal of Tongji University, vol. 20, no. 4, pp. 403–410, 1992. View at Google Scholar
  26. A. Calvi and F. Bella, “Modeling speed differential parameters in day and night environments using driving simulator,” in Proceedings of the 2014 9th International Symposium on Safety Science and Technology, ISSST 2014, pp. 648–661, China, November 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. A. M. Semeida, “Application of artificial neural networks for operating speed prediction at horizontal curves: a case study in Egypt,” Journal of Modern Transportation, vol. 22, no. 1, pp. 20–29, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. E. T. Donnell, Y. Ni, M. Adolini, and L. Elefteriadou, “Speed prediction models for trucks on two-lane rural highways,” Transportation Research Record, no. 1751, pp. 44–55, 2001. View at Google Scholar · View at Scopus
  29. C. M. Morris and E. T. Donnell, “Passenger car and truck operating speed models on multilane highways with combinations of horizontal curves and steep grades,” Journal of Transportation Engineering, vol. 140, no. 11, Article ID 04014058, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. J. E. Leisch and J. P. Leisch, “New concepts in design-speed application,” Transportation Research Record, no. 631, pp. 15–23, 1977. View at Google Scholar · View at Scopus
  31. A. Montella, F. Galante, F. Mauriello, and M. Aria, “Continuous speed profiles to investigate srivers' behavior on two-lane rural highways,” Transportation Research Record, vol. 2521, pp. 3–11, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. Transportation Research Board (TRB), Modeling operating speed. Synthesis report. Transportation Research Circular Number E-C151, Transportation Research Board, Washington, D.C., 2011. View at Publisher · View at Google Scholar
  33. A. M. P. Zuriaga, A. G. García, F. J. C. Torregrosa, and P. D'Attoma, “Modeling operating speed and deceleration on two-lane rural roads with global positioning system data,” Transportation Research Record, no. 2171, pp. 11–20, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. F. Bella, A. Calvi, and P. D'Attoma, “Operating speed prediction for Italian two-lane rural roads using speed profiles from GPS data,” in Proceedings of the 4th road safety and simulation international conference, Rome, 2013.
  35. S. Cafiso and G. Cerni, “New approach to defining continuous speed profile models for two-lane rural roads,” Transportation Research Record, no. 2309, pp. 157–167, 2012. View at Publisher · View at Google Scholar · View at Scopus
  36. G. Reymond, A. Kemeny, J. Droulez, and A. Berthoz, “Role of lateral acceleration in curve driving: Driver model and experiments on a real vehicle and a driving simulator,” Human Factors: The Journal of the Human Factors and Ergonomics Society, vol. 43, no. 3, pp. 483–495, 2001. View at Publisher · View at Google Scholar · View at Scopus
  37. D. W. Harwood, A. D. May, and I. B. Anderson, “Capacity and quality of service of two-Lane highways,” Transportation Research Board of the National Academies, 1999. View at Google Scholar
  38. F. S. Mertzanis and V. J. Hatzi, “Model for sight distance calculation and three-dimensional alignment evaluation in divided and undivided highways,” in Proceedings of the 3rd international conference on road safety and simulation, Indianapolis, 2011.
  39. T. Kim and H. Michael Zhang, “Interrelations of reaction time, driver sensitivity, and time headway in congested traffic,” Transportation Research Record, no. 2249, pp. 52–61, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. TRB, Highway Capacity Manual, Transportation research board of the national academies, 2010.
  41. A. W. Inhoff, M. S. Solomon, B. A. Seymour, and R. Radach, “Eye position changes during reading fixations are spatially selective,” Vision Research, vol. 48, no. 8, pp. 1027–1039, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. S. M. Easa and W. He, “Modeling driver visual demand on three-dimensional highway alignments,” Journal of Transportation Engineering, vol. 132, no. 5, pp. 357–365, 2006. View at Publisher · View at Google Scholar · View at Scopus
  43. “JTG B01-2014: Technical Standard of Highway Engineering, 2015”.
  44. A. M. Pérez-Zuriaga, F. J. Camacho-Torregrosa, and A. García, “Tangent-to-curve transition on two-lane rural roads based on continuous speed profiles,” Journal of Transportation Engineering, vol. 139, no. 11, pp. 1048–1057, 2013. View at Publisher · View at Google Scholar · View at Scopus
  45. K. Fitzpatrick, L. Elefteriadou, D. Harwood et al., Speed Prediction for Two-Lane Rural Highways, FHWA, U.S. Department of Transportation, 2000.
  46. Y. Yan and Z. Y. Guo, Alignment Consistency Evaluation Based on Operating Speed Prediction Models, Tongji University, Shanghai Shi, China, 2009.
  47. H. T. Zhou, C. H. Yang, Z. Y. Guo et al., Guidelines for Safety Audit of Highway, JTG/T B05-2004, Ministry of Communications of the People's Republic of China, China, 2004.
  48. S. Zhang, J. Tang, H. Wang, Y. Wang, and S. An, “Revealing intra-urban travel patterns and service ranges from taxi trajectories,” Journal of Transport Geography, vol. 61, pp. 72–86, 2017. View at Publisher · View at Google Scholar