Table of Contents Author Guidelines Submit a Manuscript
Journal of Combustion
Volume 2016, Article ID 8593523, 9 pages
http://dx.doi.org/10.1155/2016/8593523
Review Article

Review of Sensing Methodologies for Estimation of Combustion Metrics

Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931, USA

Received 3 July 2015; Accepted 10 January 2016

Academic Editor: Sergey M. Frolov

Copyright © 2016 Libin Jia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Schnorbus, S. Pischinger, T. Körfer, M. Lamping, D. Tomazic, and M. Tatu, “Diesel combustion control with closed-loop control of the injection strategy,” SAE Technical Paper 2008-01-0651, 2008. View at Publisher · View at Google Scholar
  2. S. Lee, J. Lee, S. Lee et al., “Study on reduction of diesel engine out emission through closed loop control based on the in-cylinder pressure with EGR model,” SAE Technical Paper 2013-01-0322, SAE International, 2013. View at Publisher · View at Google Scholar
  3. J. Franz, F. Schwarz, M. Guenthner et al., “Closed loop control of an HCCI multi-cylinder engine and corresponding adaptation strategies,” SAE Technical Paper 2009-24-0079, SAE, 2009. View at Publisher · View at Google Scholar
  4. J. Yanowitz, R. L. Mccormick, and M. S. Graboski, “In-use emissions from heavy-duty diesel vehicles,” Environmental Science & Technology, vol. 34, no. 5, pp. 729–740, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Amann, “Cylinder-pressure measurement and its use in engine research,” SAE Paper no. 852067, SAE, 1985. View at Google Scholar
  6. B. K. Powell, G. P. Lawson, and G. Hogh, “Advanced real time powertrain system analysis,” ASME Paper no. 87-ICE-46, ASME, 1987. View at Google Scholar
  7. M. Yoon, K. Lee, M. Sunwoo, and B. Oh, “Cylinder pressure based combustion phasing control of a CRDI diesel engine,” SAE Technical Paper 2007-01-0772, 2007. View at Publisher · View at Google Scholar
  8. Z. Yang, R. Stobart, and E. Winward, “Online adjustment of start of injection and fuel rail pressure based on combustion process parameters of diesel engine,” SAE Technical Paper 2013-01-0315, SAE, 2013. View at Publisher · View at Google Scholar
  9. Y. Huang, F. Yang, M. Ouyang, L. Chen, and X. Yang, “Optimal feedback control with in-cylinder pressure sensor under engine start conditions,” SAE Technical Paper 2011-01-1422, 2011. View at Publisher · View at Google Scholar
  10. F. Taglialatela, M. Lavorgna, E. Mancaruso, and B. M. Vaglieco, “Determination of combustion parameters using engine crankshaft speed,” Mechanical Systems and Signal Processing, vol. 38, no. 2, pp. 628–633, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Moro, N. Cavina, and F. Ponti, “In-cylinder pressure reconstruction based on instantaneous engine speed signal,” Journal of Engineering for Gas Turbines and Power, vol. 124, no. 1, pp. 220–225, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. F. T. Connolly and A. E. Yagle, “Modeling and identification of the combustion pressure process in internal combustion engines,” Mechanical Systems and Signal Processing, vol. 8, no. 1, pp. 1–19, 1994. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Shiao and J. J. Moskwa, “Cylinder pressure and combustion heat release estimation for SI engine diagnostics using nonlinear sliding observers,” IEEE Transactions on Control Systems Technology, vol. 3, no. 1, pp. 70–78, 1995. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Saraswati and S. Chand, “Reconstruction of cylinder pressure for SI engine using recurrent neural network,” Neural Computing and Applications, vol. 19, no. 6, pp. 935–944, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Gu, P. J. Jacob, and A. D. Ball, “A RBF neural network model for cylinder pressure reconstruction in internal combustion engines,” in Proceedings of the IEE Colloquium on Modeling and Signal Processing for Fault Diagnosis, Digest no. 1996/260, Leicester, UK, September 1996.
  16. F. Liu, G. A. J. Amaratunga, N. Collings, A. Soliman, and F. Liu, “An experimental study on engine dynamics model based in-cylinder pressure estimation,” SAE Paper 2012-01-0896, SAE International, 2012. View at Google Scholar
  17. T. Dinu, N. A. Henein, and W. Bryzik, “Determination of the gas-pressure torque of a multicylinder engine from measurements of the crankshaft's speed variation,” SAE Transactions, vol. 107, no. 3, pp. 294–302, 1998. View at Google Scholar
  18. G. Rizzoni, “Estimate of indicated torque from crankshaft speed fluctuations: a model for the dynamics of the IC engine,” IEEE Transactions on Vehicular Technology, vol. 38, no. 3, pp. 168–179, 1989. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Liu, G. Amaratunga, N. Collings, and A. Soliman, “An experimental study on engine dynamics model based in-cylinder pressure estimation,” SAE Technical Paper 2012-01-0896, SAE International, 2012. View at Publisher · View at Google Scholar
  20. S. Yoshiyama, E. Tomita, and Y. Hamamoto, “Fundamental study on combustion diagnostics using a spark plug an ion probe,” SAE Technical Paper 2000-01-2828, 2000. View at Publisher · View at Google Scholar
  21. M. Hellring and U. Holmberg, “An ion current based peak-finding algorithm for pressure peak position estimation,” SAE Technical Paper 2000-01-2829, 2000. View at Publisher · View at Google Scholar
  22. A. A. Martychenko, J. K. Park, Y. S. Ko, A. A. Balin, J. W. Hwang, and J. O. Chae, “A study on the possibility of estimation of in-cylinder pressure by means of measurement of spark gap breakdown voltage,” SAE Paper 01-1115, SAE International, 1999. View at Google Scholar
  23. M. Hellring and U. Holmberg, “An ion current based peak-finding algorithm for pressure peak position estimation,” SAE Technical Paper 2000-01-2829, SAE, 2000. View at Google Scholar
  24. D. Kumar, A. Ramesh, M. K. Gajendra Babu, and P. V. Manivannan, “An ionization current based cylinder gas pressure estimation for knock detection and control in a single cylinder SI engine,” Internal Combustion Engines 2009-32-0118, 2009. View at Google Scholar
  25. S. Yoshiyama, E. Tomita, and Y. Hamamoto, “Fundamental study on combustion diagnostics using a spark plug as ion probe,” SAE Transactions, vol. 109, no. 3, pp. 1990–2002, 2000. View at Google Scholar
  26. R. Johnsson, “Cylinder pressure reconstruction based on complex radial basis function networks from vibration and speed signals,” Mechanical Systems and Signal Processing, vol. 20, no. 8, pp. 1923–1940, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Kim and K. Min, “Detection of combustion start in the controlled auto ignition engine by wavelet transform of the engine block vibration signal,” Measurement Science and Technology, vol. 19, no. 8, Article ID 085407, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Gazis, D. Panousakis, R. Chen, and W.-H. Chen, “Computationally inexpensive methods of ion current signal manipulation for predicting the characteristics of engine in-cylinder pressure,” International Journal of Engine Research, vol. 7, no. 3, pp. 271–282, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. N. M. Danne, D. L. S. Hung, G. G. Zhu, and J. McKoskey, “Knock detection for a large displacement air-cooled V-twin motorcycle engine using in-cylinder ionization signals,” SAE Technical Paper 2008-32-0028, 2008. View at Publisher · View at Google Scholar
  30. G. Zhu, D. Hung, and J. Winkelman, “Combustion characteristics detection for low pressure direct injection engine using ionization signal,” SAE Technical Paper 2006-01-3317, SAE, 2006. View at Publisher · View at Google Scholar
  31. M. Bellenoue, S. Labuda, S. Julien, A. P. Chernukho, and A. N. Migoun, “Application of ionization probes for diagnostics of knocking combustion,” in Proceedings of the 7th Mediterranean Combustion Symposium, Cagliari, Italy, September 2011.
  32. G. G. Zhu, C. F. Daniels, and J. Winkelman, “MBT timing detection and its closed-loop control using in-cylinder ionization signal,” SAE Technical Paper 2004-01-2976, SAE, 2004. View at Google Scholar
  33. J. Naber, J. R. Blough, D. Frankowski, M. Goble, and J. E. Szpytman, “Analysis of combustion knock metrics in spark-ignition engines,” SAE Technical Paper 2006-01 400, 2006. View at Publisher · View at Google Scholar
  34. F. Guillemin, O. Grondin, J. Chauvin, and E. Nguyen, “Combustion parameters estimation based on knock sensor for control purpose using dedicated signal processing platform,” SAE Technical Paper 2008-01-0790, 2008. View at Publisher · View at Google Scholar
  35. L. Arnone, S. Manelli, G. Chiatti, and O. Chiavola, “In-cylinder pressure analysis through accelerometer signal processing for diesel engine combustion optimization,” SAE Technical Paper 2009-01-2079, SAE, 2009. View at Publisher · View at Google Scholar
  36. O. Chiavola, G. Chiatti, and E. Recco, “Accelerometer measurements to optimize the injection strategy,” SAE Technical Paper 2012-01-1341, SAE International, 2012. View at Publisher · View at Google Scholar
  37. F. Taglialatela, N. Cesario, M. Porto et al., “Use of accelerometers for spark advance control of SI engine,” SAE International Journal of Engines, vol. 2, no. 1, pp. 971–981, 2009. View at Publisher · View at Google Scholar
  38. C. J. Polonowski, V. K. Mather, and J. D. Naer, “Accelerometer based sensing of combustion in a high speed HPCR diesel engine,” SAE Paper 01-0972, SAE International, 2007. View at Google Scholar
  39. C. Polonowski, Accelerometer based measurements of combustion in an automotive turbocharged diesel engine [PhD dissertation], Michigan Technological University, Houghton, Mich, USA, 2009.
  40. Y. Gao and R. B. Randall, “Reconstruction of diesel engine cylinder pressure using a time domain smoothing technique,” Mechanical Systems and Signal Processing, vol. 13, no. 5, pp. 709–722, 1999. View at Publisher · View at Google Scholar · View at Scopus
  41. A. J. Morello, J. R. Blough, J. Naber, and L. Jia, “Signal processing parameters for estimation of the diesel engine combustion signature,” SAE International Journal of Passenger Cars—Mechanical Systems, vol. 4, no. 2, pp. 1201–1215, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. M. El-Ghamry, J. A. Steel, R. L. Reuben, and T. L. Fog, “Indirect measurement of cylinder pressure from diesel engines using acoustic emission,” Mechanical Systems and Signal Processing, vol. 19, no. 4, pp. 751–765, 2005. View at Publisher · View at Google Scholar · View at Scopus
  43. J. T. Kim and R. H. Lyon, “Cepstral analysis as a tool for robust processing, deverberation and detection of transients,” Mechanical Systems and Signal Processing, vol. 6, no. 1, pp. 1–15, 1992. View at Publisher · View at Google Scholar · View at Scopus
  44. R. Villarino and J. F. Böhme, “Fast in-cylinder pressure reconstruction from structure-borne sound using the EM algorithm,” in Proceedings of the IEEE International Conference on Accoustics, Speech, and Signal Processing (ICASSP '03), vol. 6, pp. 597–600, IEEE, Hong Kong, China, April 2003. View at Scopus
  45. M. Wagner, J. Böhme, and J. Förster, “In-cylinder pressure estimation from structure-borne sound,” SAE Technical Paper 2000-01-0930, 2000. View at Publisher · View at Google Scholar
  46. R. Villarino and J. F. Bohme, “Pressure reconstruction and misfire detection from multichannel structure-borne sound,” in Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP '04), vol. 2, IEEE, Montreal, Canada, May 2004.
  47. R. Villarino and J. F. Böhme, “Pressure reconstruction and misfire detection from multichannel structure-borne sound,” in Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP '04), vol. 2, pp. ii-141–ii-144, IEEE, Montreal, Canada, May 2004. View at Publisher · View at Google Scholar · View at Scopus
  48. R. Villarino and J. Böhme, “Misfire detection in spark-ignition engines with the EM algorithm,” in Proceedings of the 3rd IEEE International Symposium on Signal Processing and Information Technology (ISSPIT '03), pp. 142–145, Darmstadt, Germany, December 2003. View at Publisher · View at Google Scholar
  49. K. Bizon, G. Continillo, E. Mancaruso, and B. M. Vaglieco, “Reconstruction of in-cylinder pressure in a diesel engine from vibration signal using a RBF neural network model,” SAE Technical Paper 2011-24-0161, 2011. View at Publisher · View at Google Scholar
  50. L. Jia, J. Naber, J. Blough, and S. A. Zekavat, “Accelerometer-based combustion metrics reconstruction with radial basis function neural network for a 9 L diesel engine,” Journal of Engineering for Gas Turbines and Power, vol. 136, no. 3, Article ID 031507, 2014. View at Publisher · View at Google Scholar · View at Scopus
  51. J. M. Desantes and A. J. Torregrosa, “Wavelet transform applied to combustion noise analysis in high-speed DI diesel engines,” SAE Technical Paper 2001-01-1545, SAE International, 2001. View at Publisher · View at Google Scholar
  52. A. K. Sen, G. Litak, R. Taccani, and R. Radu, “Wavelet analysis of cycle-to-cycle pressure variations in an internal combustion engine,” Chaos, Solitons & Fractals, vol. 38, no. 3, pp. 886–893, 2008. View at Publisher · View at Google Scholar · View at Scopus
  53. A. Hariyanto, K. Bagiasna, I. Asharimurti, A. Wijaya, I. K. Reksowardoyo, and W. Arismunandar, “Application of wavelet analysis to determine the start of combustion of diesel engines,” SAE Technical Paper 2007-01-3556, 2007. View at Publisher · View at Google Scholar
  54. J. Borg, G. Saikalis, S. Oho, and K. Cheok, “Knock signal analysis using the discrete wavelet transform,” SAE Technical Paper 2006-01-0226, SAE International, 2006. View at Publisher · View at Google Scholar
  55. L. Jia, J. Naber, and J. Blough, “Application of FRF with SISO and MISO model for accelerometer-based in-cylinder pressure reconstruction on a 9-L diesel engine,” Proceedings of the Institution of Mechanical Engineers C: Journal of Mechanical Engineering Science, vol. 229, no. 4, pp. 629–643, 2015. View at Publisher · View at Google Scholar
  56. J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill, New York, NY, USA, 1988.