Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2013, Article ID 489734, 7 pages
http://dx.doi.org/10.1155/2013/489734
Research Article

Electrophoretic Deposition of Aluminum Nitride from Its Suspension in Acetylacetone Using Iodine as an Additive

1Department of Chemistry, Delaware State University, 1200 N. DuPont Highway, Dover, DE 19901, USA
2Institute of Energy Conversion, University of Delaware, Newark, DE 19716, USA
3Department of Chemistry, Columbus State University, Columbus, GA 31907, USA

Received 20 June 2012; Revised 28 August 2012; Accepted 26 November 2012

Academic Editor: Mitchell R. M. Bruce

Copyright © 2013 Bizuneh Workie et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. M. Sheppard, “Aluminum nitride: a versatile but challenging material,” The Bulletin of the American Ceramic Society, vol. 69, no. 11, pp. 1801–1812, 1990. View at Google Scholar
  2. N. Kuramoto and H. Taniguchi, “Transparent AIN ceramics,” Journal of Materials Science Letters, vol. 3, no. 6, pp. 471–474, 1984. View at Publisher · View at Google Scholar
  3. D. D. Marchant and T. E. Nemecek, “Aluminum nitride: preparation, processing, and properties,” Advances in Ceramics, vol. 26, pp. 19–54, 1989. View at Google Scholar
  4. Y. Huokawa, K. Tsumi, K. Takamizawa, T. Kamata, and S. Noguchi, “A1N substrates with high thermal conductivity,” IEEE Transactions on Components, Packaging, and Manufacturing Technology, vol. 8, pp. 247–252, 1985. View at Google Scholar
  5. N. Iwase, K. Anzai, and K. Shinozaki, “Aluminum nitride substrates having high thermal conductivity,” Solid State Technology, vol. 29, no. 10, pp. 135–138, 1986. View at Google Scholar · View at Scopus
  6. C. Sibran, R. Blanchet, M. Garrigues, and P. Viktorovitch, “Ion beam techniques combining insulator deposition and hydrogen plasma etching for III-V compound metal/insulator/semiconductor device applications,” Thin Solid Films, vol. 103, no. 1–3, pp. 211–219, 1983. View at Google Scholar · View at Scopus
  7. L. G. Pearce, R. L. Gunshor, and R. F. Pierret, “Aluminum nitride on silicon surface acoustic wave devices,” Applied Physics Letters, vol. 39, no. 11, pp. 878–879, 1981. View at Publisher · View at Google Scholar · View at Scopus
  8. J. K. Liu, K. M. Lakin, and K. L. Wang, “Growth morphology and surface-acoustic-wave measurements of AIN films on sapphire,” Journal of Applied Physics, vol. 46, no. 9, pp. 3703–3706, 1975. View at Publisher · View at Google Scholar · View at Scopus
  9. G. A. Slack and T. F. McNelly, “Growth of high purity AlN crystals,” Journal of Crystal Growth, vol. 34, no. 2, pp. 263–279, 1976. View at Google Scholar · View at Scopus
  10. P. N. Favennec, L. Henry, T. Janicki, and M. Salvi, “Protection du GaAs, Ga1-xAlxAs et GaAs1-xPx par du nitrure d'aluminium déposé par pulvérisation réactive,” Thin Solid Films, vol. 47, no. 3, pp. 327–333, 1977. View at Google Scholar · View at Scopus
  11. C. R. Aita, “Basal orientation aluminum nitride grown at low temperature by rf diode sputtering,” Journal of Applied Physics, vol. 53, no. 3, p. 1807, 1982. View at Publisher · View at Google Scholar
  12. L. Xinjiao, X. Zechuan, H. Ziyou et al., “On the properties of AlN thin films grown by low temperature reactive r.f. sputtering,” Thin Solid Films, vol. 139, no. 3, pp. 261–274, 1986. View at Google Scholar · View at Scopus
  13. H. Yamashita, K. Fukai, S. Misawa, and S. Yashida, “Optical properties of AlN epitaxial thin films in the vacuum ultraviolet region,” Journal of Applied Physics, vol. 53, no. 2, p. 896, 1979. View at Publisher · View at Google Scholar
  14. A. Singh, R. A. Lessard, and E. J. Knystautas, “IR and x-ray studies of ion-beam-synthesized aluminium nitride films,” Thin Solid Films, vol. 138, no. 1, pp. 79–86, 1986. View at Google Scholar · View at Scopus
  15. J. A. Taylor and J. W. Rabalais, “Reaction of N2+ beams with aluminum surfaces,” The Journal of Chemical Physics, vol. 75, no. 4, pp. 1735–1745, 1981. View at Google Scholar · View at Scopus
  16. J. M. Harper, J. J. Cuomo, and T. G. Hentzell, “Quantitative ion beam process for the deposition of compound thin films,” Applied Physics Letters, vol. 41, no. 6, p. 547, 1983. View at Publisher · View at Google Scholar
  17. P. Sarker and S. J. Nicholson, “Electrophoretic Deposition (EPD): mechanisms, kinetics, and application to ceramics,” Journal of the American Ceramic Society, vol. 79, no. 8, pp. 1987–2002, 1996. View at Publisher · View at Google Scholar
  18. O. O. van der Biest and L. J. Vandeperre, “Electrophoretic deposition of materials,” Annual Review of Materials Science, vol. 29, pp. 327–352, 1999. View at Publisher · View at Google Scholar · View at Scopus
  19. S. N. Heavens, “Electrophoretic deposition as a processing route for ceramics,” in Advanced Ceramic Process Technology, J. G. P. Binner, Ed., vol. 1, chapter 7, Noyes, Park Ridge, NJ, USA, 1990. View at Google Scholar
  20. T. Ishihara, K. Sato, and Y. Takita, “Electrophoretic deposition of Y2O3-stabilized ZrO2 electrolyte films in solid oxide fuel cells,” Journal of the American Ceramic Society, vol. 79, no. 4, pp. 913–919, 1996. View at Google Scholar · View at Scopus
  21. K. Mortiz and T. Reetz, “Electrophoretic shaping of aluminium nitride,” CFI Ceramic Forum International, vol. 70, no. 7, pp. 348–350, 1993. View at Google Scholar · View at Scopus
  22. L. Vandeperre, C. Zhao, and O. van der Biest, “Correlation between surface charge of a powder in water and electrophoretic deposition from non-aqueous media,” British Ceramic Proceedings, vol. 61, pp. 69–74, 2000. View at Google Scholar
  23. K. Mortiz and E. Müller, “Investigation of the electrophoretic deposition behaviour of non-aqueous ceramic supensions,” Journal of Materials Science, vol. 41, pp. 8047–8058, 2006. View at Publisher · View at Google Scholar
  24. X. Jian-Feng, L. Jun, Z. Guo-Hong, Z. Hai-Long, and W. Shi-Wei, “Fabrication of aluminium nitride by electrophoretic deposition,” Journal of Inorganic Materials, vol. 24, pp. 1151–1154, 2009. View at Publisher · View at Google Scholar
  25. H. Abdoli, M. Zarabian, P. Alizadeh, and S. K. Sadrnezhaad, “Fabrication of aluminum nitride coatings by electrophoretic deposition: effect of particle size on deposition and drying behavior,” Ceramics International, vol. 37, no. 1, pp. 313–319, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Zhang, J. Li, G. Zhou, and S. Wang, “Fabrication of aluminium nitride by electrophoretic deposition,” Advanced Materials Research, vol. 412, pp. 183–186, 2012. View at Publisher · View at Google Scholar
  27. T. Wade and R. M. Crooks, “Electrochemical synthesis of ceramic materials. 4. Electrophoretic deposition of metal nitride ceramic precursors,” Chemistry of Materials, vol. 8, pp. 832–835, 1996. View at Publisher · View at Google Scholar
  28. T. Wade, Electrochemical synthesis of metal-nitride ceramic powders and metal-nitride ceramic coatings [Ph. D. Dissertation], The University of New Mexico, 1995.
  29. B. Workie, B. McCandless, and Z. Gebeyehu, “Effects of various factors on the amount of AlN coated in electrophoretic deposition of aluminum nitride from its suspension in acetylacetone,” Meeting Abstracts of the Electrochemical Society, vol. MA2006-01, p. 451, 2006. View at Google Scholar
  30. B. Workie, B. McCandless, and Z. Gebeyehu, “Non-aqueous electrophoretic deposition of aluminum nitride from its suspension in acetylacetone,” Meeting Abstracts of the Electrochemical Society, vol. MA2006-01, p. 450, 2006. View at Google Scholar
  31. H. C. Hamaker, “Formation of a deposit by electrophoresis,” Transactions of the Faraday Society, vol. 36, pp. 279–287, 1940. View at Publisher · View at Google Scholar
  32. G. E. F. Brewer, “Electrodeposition of ceramic coatings,” American Ceramic Society Bulletin, vol. 51, pp. 216–217, 1972. View at Google Scholar
  33. J. Mizuguchi, K. Sumi, and T. Muchi, “Highly stable nonaqueous suspension for the electrophoretic deposition of powdered substances,” Journal of the Electrochemical Society, vol. 130, no. 9, pp. 1819–1825, 1983. View at Google Scholar · View at Scopus
  34. H. Nojima, H. Shintaku, M. Nagata, and M. Koba, “Fabrication of Y-Ba-Cu-O superconducting films on Cu substrates by an electrophoretic deposition technique,” Japanese Journal of Applied Physics, vol. 29, p. L1655, 1990. View at Publisher · View at Google Scholar
  35. H. Nojima, M. Nagata, H. Shintakiu, and M. Koba, “Fabrication of ag-doped Y1Ba2Cu3O7-x superconducting films on Cu substrates by electrophoretic deposition,” Japanese Journal of Applied Physics, vol. 30, p. L1166, 1991. View at Publisher · View at Google Scholar
  36. Y. Hirata, A. Nishimoto, and Y. Ishihara, “Forming of alumina powder by electrophoretic deposition,” Seramikusu Kyukai Ronbunshi, vol. 99, pp. 108–113, 1991. View at Publisher · View at Google Scholar
  37. T. Wade, J. Park, E. G. Graza, C. B. Ross, D. M. Smith, and R. M. Crooks, “Electrochemical synthesis of ceramic materials. 2. Synthesis of aluminum nitride (AlN) and an AlN polymer precursor: chemistry and materials characterization,” Journal of the American Chemical Society, vol. 114, no. 24, pp. 9457–9464, 1992. View at Publisher · View at Google Scholar