Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2013, Article ID 673961, 8 pages
http://dx.doi.org/10.1155/2013/673961
Research Article

Anticorrosive Performance of Zinc Phosphate Coatings on Mild Steel Developed Using Galvanic Coupling

1Department of Chemistry, Faculty of Engineering and Technology, SRM University, Chennai 603203, India
2Department of Chemistry, Thiru Kolanjiappar Government Arts College, Virudhachalam 606001, India

Received 10 June 2012; Accepted 27 September 2012

Academic Editor: Rafael Garcia-Tenorio

Copyright © 2013 M. Arthanareeswari et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Rausch, The Phosphating of Metals, Finishing Publications, London, UK, 1990.
  2. D. B. Freeman, Phosphating and Metal Pretreatment—A Guide to Modern Processes and Practice, Industrial Press, New York, NY, USA, 1986.
  3. C. Rajagopal and K. I. Vasu, Conversion Coatings: A Reference for Phosphating, Chromating and Anodizing, Tata McGraw-Hill Publishing Company, New Delhi, India, 2000.
  4. T. S. N. Sankara Narayanan and M. Subbaiyan, “Overheating-its decisive role in phosphating,” Metal Finishing, vol. 93, no. 1, pp. 30–31, 1995. View at Google Scholar · View at Scopus
  5. T. S. N. S. Narayanan and M. Subbaiyan, “Effect of surfactants on the growth and crystal habit of zinc phosphate coating,” Transactions of the Institute of Metal Finishing, vol. 71, no. 1, pp. 37–40, 1993. View at Google Scholar · View at Scopus
  6. T. S. N. Sankara Narayanan, “Effect of surfactants on phosphate film epitaxy,” Metal Finishing, vol. 94, no. 3, pp. 47–49, 1996. View at Google Scholar · View at Scopus
  7. V. Burokas, A. Martušiene, and G. Bikulčius, “The influence of hexametaphosphate on formation of zinc phosphate coatings for deep drawing of steel tubes,” Surface and Coatings Technology, vol. 102, no. 3, pp. 233–236, 1998. View at Google Scholar · View at Scopus
  8. M. Arthanareeswari, T. S. N. Sankara Narayanan, P. Kamaraj, and M. Tamilselvi, “Polarization and impedance studies on zinc phosphate coating developed using galvanic coupling,” Journal of Coatings Technology Research, vol. 9, no. 1, pp. 39–46, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Arthanareeswari, T. S. N. Sankara Narayanan, P. Kamaraj, and M. Tamilselvi, “Influence of galvanic coupling on the formation of zinc phosphate coating,” Indian Journal of Chemical Technology, vol. 17, no. 3, pp. 167–175, 2010. View at Google Scholar · View at Scopus
  10. M. Arthanareeswari, K. Ravichandran, T. S. N. Sankara Narayanan, and S. Rajeswari, “Effect of cathode materials on the phosphatability and corrosion resistance of mild steel,” Indian Surface Finishing, vol. 1, no. 1, pp. 80–88, 2004. View at Google Scholar
  11. M. Arthanareeswari, K. Ravichandran, T. S. N. Sankara Narayanan, P. Kamaraj, and S. Rajeswari, “Effect of cathode materials on the phosphatability and corrosion resistance of mild steel,” Journal of Current Science, vol. 2, no. 2, pp. 153–160, 2002. View at Google Scholar
  12. K. Ravichandran, H. Sivanandh, S. Ganesh, T. Hariharasudan, and T. S. N. Sankara Narayanan, “Acceleration of the phosphating process—the utility of galvanic coupling,” Metal Finishing, vol. 98, no. 9, pp. 48–54, 2000. View at Google Scholar
  13. T. S. N. Sankara Narayanan and M. Subbaiyan, “Effect of surfactants on the porosity and corrosion resistance of zinc-phosphated steel,” Metal Finishing, vol. 91, no. 8, pp. 43–45, 1993. View at Google Scholar · View at Scopus
  14. T. S. N. Sankara Narayanan and M. Subbaiyan, “Sodium diethyldithiocarbamate: an effective complexone for cold zinc phosphating,” Transactions of the Institute of Metal Finishing, vol. 75, no. 12, pp. 81–83, 1992. View at Google Scholar
  15. T. S. N. Sankara Narayanan and M. Subbaiyan, “Influence of hexadecyl dithiocarbamate on phosphate surface chemical conversion coatings on mild steel,” Surface and Coatings Technology, vol. 43-44, no. 1, pp. 543–553, 1990. View at Google Scholar · View at Scopus
  16. T. S. N. Sankara Narayanan, “Comparison of coating weight and potential-time measurements in phosphating operations—a correlation study,” Product Finishing, vol. 49, no. 2, pp. 31–33, 1996. View at Google Scholar · View at Scopus
  17. S. Jegannathan, T. S. N. Sankara Narayanan, K. Ravichandran, and S. Rajeswari, “Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests,” Electrochimica Acta, vol. 51, no. 2, pp. 247–256, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Jegannathan, T. S. N. Sankara Narayanan, K. Ravichandran, and S. Rajeswari, “Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment,” Progress in Organic Coatings, vol. 57, no. 4, pp. 392–399, 2006. View at Publisher · View at Google Scholar · View at Scopus