Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2014, Article ID 951471, 8 pages
http://dx.doi.org/10.1155/2014/951471
Research Article

Effect of Mn Content and Solution Annealing Temperature on the Corrosion Resistance of Stainless Steel Alloys

Department of Mechanical Engineering, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran 31261, Saudi Arabia

Received 11 October 2013; Accepted 3 February 2014; Published 13 March 2014

Academic Editor: Theocharis C. Stamatatos

Copyright © 2014 Ihsan-ul-Haq Toor. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. H. Stott, G. C. Wood, and J. Stringer, “The influence of alloying elements on the development and maintenance of protective scales,” Oxidation of Metals, vol. 44, no. 1-2, pp. 113–145, 1995. View at Publisher · View at Google Scholar · View at Scopus
  2. S. N. Basu and G. J. Yurck, “Effect of alloy grain size and silicon content on the oxidation of austenitic Fe-Cr-Ni-Mn-Si alloys in pure O2,” Oxidation of Metal, no. 281, p. 315, 1991. View at Google Scholar
  3. H. Y. Ha, C. J. Park, and H. S. Kwon, “Effects of non-metallic inclusions on the initiation of pitting corrosion in 11% Cr ferritic stainless steel examined by micro-droplet cell,” Corrosion Science, vol. 49, no. 3, pp. 1266–1275, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. E. G. Webb, T. Suter, and R. C. Alkire, “Microelectrochemical measurements of the dissolution of single MnS inclusions, and the prediction of the critical conditions for pit initiation on stainless steel,” Journal of the Electrochemical Society, vol. 148, no. 5, pp. B186–B195, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. E. G. Webb and R. C. Alkire, “Pit initiation at single sulfide inclusions in stainless steel: I. Electrochemical microcell measurements,” Journal of the Electrochemical Society, vol. 149, no. 6, pp. B272–B279, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Kemp, A. van Bennekom, and F. P. A. Robinson, “Evaluation of the corrosion and mechanical properties of a range of experimental CrMn stainless steels,” Materials Science and Engineering A, vol. 199, no. 2, pp. 183–194, 1995. View at Google Scholar · View at Scopus
  7. G. A. Sands and M. B. Keady, “How the 200-series compares with 18-8 stainless steels,” Materials Design and Engineering, vol. 47, 1958. View at Google Scholar
  8. R. A. Lula and W. G. Renshaw, “Corrosion resistance and mechanical properties of Cr Ni-Mn stainless steels,” Metal Progress, vol. 69, 1965. View at Google Scholar
  9. J. S. Stanko and D. Wellbeloved, “Manganese in corrosion resistant steel,” Report, SAMANCOR Limited, Johannesburg, South Africa, 1991. View at Google Scholar
  10. E. Lunarska, Z. Szklarska-Smialowska, and M. Janik-Czachor, “Susceptibility of Cr-Ni-Mn stainless steels to pitting in chloride solutions,” Corrosion, vol. 31, no. 7, pp. 231–234, 1975. View at Publisher · View at Google Scholar
  11. J. Stewart and D. Williams, “The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions,” Corrosion Science, vol. 33, no. 3, pp. 457–463, 1992. View at Publisher · View at Google Scholar
  12. J. O. Park, S. Matsch, and H. Böhni, “Effects of temperature and chloride concentration on pit initiation and early pit growth of stainless steel,” Journal of the Electrochemical Society, vol. 149, no. 2, pp. B34–B39, 2002. View at Publisher · View at Google Scholar
  13. C. M. Hsaio and E. J. Dulis, “Effect of interstitial C and N and precipitation reactions on the properties of austenitic Cr-Mn-C-N steels,” Transactions of the American Society for Metals, vol. 52, p. 855, 1960. View at Google Scholar
  14. H. Tan, Y. Jiang, B. Deng, T. Sun, J. Xu, and J. Li, “Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750,” Materials Characterization, vol. 60, no. 9, pp. 1049–1054, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Cvijović and G. Radenković, “Microstructure and pitting corrosion resistance of annealed duplex stainless steel,” Corrosion Science, vol. 48, no. 12, pp. 3887–3906, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Hasannejad, T. Shahrabi, A. S. Rouhaghdam, and M. Aliofkhazraei, “Effect of temperature on pitting corrosion resistance of 316 stainless steel coated by cerium oxide film in 3.5% NaCl solution,” Journal of Materials Science and Technology, vol. 24, no. 5, pp. 715–717, 2008. View at Google Scholar · View at Scopus
  17. A. S. Hamada, L. P. Karjalainen, and M. C. Somani, “Electrochemical corrosion behaviour of a novel submicron-grained austenitic stainless steel in an acidic NaCl solution,” Materials Science and Engineering A, vol. 431, no. 1-2, pp. 211–217, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. R. T. Loto, C. A. Loto, A. P. I. Popoola, and M. Ranyaoa, “Pyrimidine derivatives as environmentally-friendly corrosion inhibitors: a review,” International Journal of Physical Sciences, vol. 7, no. 19, pp. 2697–2705, 2012. View at Publisher · View at Google Scholar
  19. I. Toor, K. J. Park, and H. Kwon, “Manganese effects on repassivation kinetics and SCC susceptibility of high Mn-N austenitic stainless steel alloys,” Journal of the Electrochemical Society, vol. 154, no. 9, pp. C494–C499, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Stewart and D. Williams, “The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions,” Corrosion Science, vol. 33, no. 3, pp. 457–474, 1992. View at Publisher · View at Google Scholar
  21. H. S. Kwon and K. J. Park, “Effects of manganese on the passivity of Fe-18Cr-xMn (x = 0, 6, 12),” ECS Transactions, vol. 1, no. 4, pp. 313–320, 2006. View at Publisher · View at Google Scholar
  22. A. Afolabi and N. Peleowo, “Effect of heat treatment on corrosion behaviour of austenitic stainless steel in mild acid medium,” in Proceedings of the International Conference on Chemical, Ecology and Environmental Sciences (ICCEES '2011), Pattaya, Thailand, December 2011.
  23. M. Keddam, O. R. Mattos, and H. Takenouti, “Mechanism of anodic dissolution of iron-chromium alloys investigated by electrode impedances—I. Experimental results and reaction model,” Electrochimica Acta, vol. 31, no. 9, pp. 1147–1158, 1986. View at Google Scholar · View at Scopus
  24. R. F. A. Jargelius-Pettersson and B. G. Pound, “Examination of the role of molybdenum in passivation of stainless steels using ac impedance spectroscopy,” Journal of the Electrochemical Society, vol. 145, no. 5, pp. 1462–1469, 1998. View at Google Scholar · View at Scopus
  25. A. Pardo, M. C. Merino, A. E. Coy, F. Viejo, R. Arrabal, and E. Matykina, “Effect of Mo and Mn additions on the corrosion behaviour of AISI 304 and 316 stainless steels in H2SO4,” Corrosion Science, vol. 50, no. 3, pp. 780–794, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Keddam, H. Takenouti, and D. Thierry, “Exfoliation corrosion of aluminium alloys examined by electrode impedance,” Electrochimica Acta, vol. 42, no. 1, pp. 87–97, 1997. View at Publisher · View at Google Scholar
  27. G. E. Badea, A. Caraban, M. Sebesan, S. Dzitac, P. Cret, and A. Setel, “polarisation measurements used for corrosion rates determination,” Journal of Sustainable Energy, vol. 1, no. 1, 2010. View at Google Scholar
  28. L. Zhang, W. Zhang, Y. Jiang, B. Deng, D. Sun, and J. Li, “Influence of annealing treatment on the corrosion resistance of lean duplex stainless steel 2101,” Electrochimica Acta, vol. 54, no. 23, pp. 5387–5392, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Tan, Z. Wang, Y. Jiang et al., “Annealing temperature effect on the pitting corrosion resistance of plasma arc welded joints of duplex stainless steel UNS S32304 in 1.0 M NaCl,” Corrosion Science, vol. 53, no. 6, pp. 2191–2200, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. K. J. Park and H. S. Kwon, “Effects of Mn on the localized corrosion behavior of Fe-18Cr alloys,” Electrochimica Acta, vol. 55, no. 9, pp. 3421–3427, 2010. View at Publisher · View at Google Scholar · View at Scopus