Numerical Well Test Analysis for Polymer Flooding considering the Non-Newtonian Behavior

Table 1

Reservoir parameters.

Parameters	Value
Initial reservoir pressure, MPa	20
Layer thickness, m	10
Horizontal permeability, m²	0.5
Porosity	0.2
Compressibility of rock	0.00015
Initial saturation of oil	0.3
Initial saturation of water	0.7
Initial concentration of polymer, kg/m³	0
Wellbore radius, m	0.1
Liquid rate of production well, m³/day	10
Liquid rate of injection well, m³/day	10
Reference pressure for PVT, MPa	20
Viscosity of oil, Pa·s	0.01
Viscosity of water, Pa·s	0.0006
Volume factor for oil	1.12
Volume factor for water	1.01
Compressibility of oil, 1/MPa	0.0006
Compressibility of water, 1/MPa	0.0006