Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2017, Article ID 4176593, 8 pages
https://doi.org/10.1155/2017/4176593
Research Article

Laboratory Research on Fracture-Supported Shielding Temporary Plugging Drill-In Fluid for Fractured and Fracture-Pore Type Reservoirs

1Guangdong Provincial Key Laboratory of Petrochemical Equipment Fault Diagnosis, Guangdong University of Petrochemical Technology, Maoming, Guangdong 525000, China
2State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China
3Chongqing University of Science & Technology, Chongqing 401331, China

Correspondence should be addressed to Dawei Liu; moc.361@8722wdl

Received 16 November 2016; Revised 3 January 2017; Accepted 13 February 2017; Published 13 March 2017

Academic Editor: Achinta Bera

Copyright © 2017 Dawei Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Gu, Y.-G. Zhang, Y.-T. Gao, T.-F. Li, and X. Liu, “Protective methods, techniques and technologies and drilling/completion fluids for fractured reservoirs,” Oilfield Chemistry, vol. 24, no. 1, pp. 87–92, 2007. View at Google Scholar · View at Scopus
  2. Y. Kang, L. You, X. Xu, and Z. Liao, “Practices of formation damage control for deep fractured tight gas reservoir in western Sichuan basin,” in Proceedings of the International Oil and Gas Conference and Exhibition in China: Opportunities and Challenges in a Volatile Environment (IOGCEC '10), pp. 1665–1673, Beijing, China, June 2010. View at Scopus
  3. S. Benaissa, A. Bachelot, and S. Ong, “Preventing mud losses and differential sticking by altering effective stress of depleted sands,” in Proceedings of the IADC/SPE Asia Pacific Drilling Technology Conference—Meeting the Value Challenge: Performance, Deliverability and Cost, pp. 396–405, IADC/SPE, Bangkok, Thailand, November 2006. View at Scopus
  4. P.-Y. Luo, “Shielding temporary plugging technology for protecting oil layer in drilling and completion process,” in China National Petroleum Company Academy Collection, Academician of Chinese Academy of Engineering-Luo Pingya, pp. 68–98, Encyclopedia of China Publishing House, Beijing, China, 1997. View at Google Scholar
  5. D.-W. Liu, L.-J. You, M. Lei et al., “Research progresses in temporary plugging technology for carbonate reservoir protection,” Drilling Fluid & Completion Fluid, vol. 2, no. 5, pp. 57–61, 2008. View at Google Scholar
  6. G. F. Oluyemi, “Investigation of depletion induced formation damage mechanisms in fractured reservoirs,” in Proceedings of the 9th European Formation Damage Conference, pp. 634–638, Noordwijk, The Netherlands, June 2011. View at Scopus
  7. C.-Y. Xu, Y.-L. Kang, D.-Q. Li et al., “Mathematical model and experimental study on drill-in fluid loss control and formation damage prevention in fractured tight reservoir,” in Proceedings of the Asia Pacific Oil & Gas Conference and Exhibition, SPE 182266-MS, Perth, Australia, October 2016.
  8. F. E. Dupriest, “Fracture closure stress (FCS) and lost returns practice,” in Proceedings of the SPE/IADC Drilling Conference, SPE 92192, Amsterdam, The Netherlands, February 2005.
  9. Y. L. Kang, L. J. You, X. Xu, and Z. Liao, “Prevention of formation damage induced by mud lost in deep fractured tight gas reservoir in western Sichuan basin,” Journal of Canadian Petroleum Technology, vol. 51, no. 1, pp. 46–51, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Kang, C. Xu, L. You, H. Yu, and D. Zhang, “Temporary sealing technology to control formation damage induced by drill-in fluid loss in fractured tight gas reservoir,” Journal of Natural Gas Science and Engineering, vol. 20, pp. 67–73, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. Y.-L. Kang, C.-Y. Xu, L. Tang, S. Li, and D.-Q. Li, “Constructing a tough shield around the wellbore: theory and method for lost-circulation control,” Petroleum Exploration and Development, vol. 41, no. 4, pp. 473–479, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. Y.-L. Kang, C.-Y. Xu, L.-J. You, H.-F. Yu, and B.-J. Zhang, “Comprehensive evaluation of formation damage induced by working fluid loss in fractured tight gas reservoir,” Journal of Natural Gas Science and Engineering, vol. 18, pp. 353–359, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. Y.-L. Kang, C.-Y. Xu, L.-J. You, and H.-H. Yu, “An optimal design for millimeter-wide facture plugged zone,” Natural Gas Industry B, vol. 7, no. 3, pp. 1–7, 2015. View at Google Scholar
  14. J. Liu, Y.-L. Kang, and D.-W. Liu, “Research on temporary shielding plugging experiment in considering fracture-pore reservoir of fracture width and pressure difference,” Drilling & Production Technology, vol. 29, no. 2, pp. 97–101, 2006. View at Google Scholar
  15. F. Zhao, H.-M. Tang, Y.-F. Meng, H.-M. Xu, and X.-Y. Xie, “Research on the determination of the strengths of the mud cakes formed by temporary bridging and plugging agents,” Drilling Fluid and Completion Fluid, vol. 24, no. 2, pp. 29–31, 2007. View at Google Scholar · View at Scopus
  16. A. Kumar, S. Savari, D. Whitfill, and D. E. Jamison, “Wellbore strengthening: the less-studied properties of lost-circulation materials,” in Proceedings of the SPE Annual Technical Conference and Exhibition, SPE 133484, Florence, Italy, September 2010.
  17. E. Van Oort, J. Friedheim, T. Pierce, and J. Lee, “Avoiding losses in depleted and weak zones by constantly strengthening wellbores,” SPE Drilling and Completion, vol. 26, no. 4, pp. 519–530, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. H. Wang, M. Y. Soliman, and B. F. Towler, “Investigation of factors for strengthening a wellbore by propping fractures,” SPE Drilling and Completion, vol. 24, no. 3, pp. 441–451, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. N. Morita and G.-F. Fuh, “Parametric analysis of wellbore-strengthening methods from basic rock mechanics,” SPE Drilling and Completion, vol. 27, no. 2, pp. 315–327, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. M. P. Shahri, T. T. Oar, R. Safari, M. Karimi, and U. Mutlu, “Advanced semianalytical geomechanical model for wellbore-strengthening applications,” SPE Journal, vol. 20, no. 6, pp. 1276–1286, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Kalantariasl and P. Bedrikovetsky, “Stabilization of external filter cake by colloidal forces in a “well-reservoir” system,” Industrial and Engineering Chemistry Research, vol. 53, no. 2, pp. 930–944, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Kalantariasl, R. Farajzadeh, Z. You, and P. Bedrikovetsky, “Nonuniform external filter cake in long injection wells,” Industrial and Engineering Chemistry Research, vol. 54, no. 11, pp. 3051–3061, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. R. N. Sacramento, Y. Yang, Z. You et al., “Deep bed and cake filtration of two-size particle suspension in porous media,” Journal of Petroleum Science and Engineering, vol. 126, no. 1, pp. 201–210, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. J. He, Y.-L. Kang, D.-W. Liu, M. Lei, and Z.-Z. Shu, “The stress sensitivity research on porous and fractured porous carbonate reservoirs,” Drilling and Production Technology, vol. 28, no. 2, pp. 6–93, 2005. View at Google Scholar · View at Scopus
  25. B. S. Aadnoy, M. Arriado, and R. Flateboe, “Design of well barriers to combat circulation losses,” in Proceedings of the SPE/IADC Drilling Conference, SPE105449-MS, Amsterdam, The Netherlands, February 2007.