Table of Contents Author Guidelines Submit a Manuscript
Journal of Computer Networks and Communications
Volume 2013 (2013), Article ID 392056, 19 pages
http://dx.doi.org/10.1155/2013/392056
Research Article

Wireless Sensing Based on RFID and Capacitive Technologies for Safety in Marble Industry Process Control

Department of Information Engineering, University of Pisa, Via Caruso 16, 56122 Pisa, Italy

Received 29 July 2012; Accepted 19 October 2012

Academic Editor: Agusti Solanas

Copyright © 2013 Fabrizio Iacopetti et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Barsanti Spa, “Gangsaw TLD 60A/80A machine,” 2009, http://www.barsantimacchine.it.
  2. Barsanti Spa, “LCA200 marble polishing machine,” 2008, http://www.barsantimacchine.it.
  3. D. Miorandi, E. Uhlemann, S. Vitturi et al., “Guest editorial: special section on wireless technologies in factory and industrial automation,” IEEE Transactions on Industrial Informatics, vol. 3, no. 2, pp. 95–98, 2007. View at Google Scholar
  4. Celver srl, “Archimedes optical system,” http://www.celver.it/new-site/prodotti/prodotti-archimedes.asp.
  5. M. Bramanti et al., “A procedure to detect flaws inside large sized marble blocks by ultrasound,” Subsurface Sensing Technologies and Applications, vol. 2, no. 1, pp. 1–13, 2001. View at Google Scholar
  6. M. A. Selver, O. Akay, E. Ardali, B. A. Yavuz, O. Önal, and G. Özden, “Cascaded and hierarchical neural networks for classifying surface images of marble slabs,” IEEE Transactions on Systems, Man and Cybernetics Part C, vol. 39, no. 4, pp. 426–439, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. J. D. Luis-Delgado, J. Martínez-Alajarín, and L. M. Tomás-Balibrea, “Classification of marble surfaces using wavelets,” Electronics Letters, vol. 39, no. 9, pp. 714–715, 2003. View at Publisher · View at Google Scholar
  8. S. A. Coker and Y. C. Shin, “In-process control of surface roughness due to tool wear using a new ultrasonic system,” International Journal of Machine Tools and Manufacture, vol. 36, no. 3, pp. 411–422, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. E. Bozzi and M. Bramanti, “A planar applicator for measuring surface dielectric constant of materials,” IEEE Transactions on Instrumentation and Measurement, vol. 49, no. 4, pp. 773–775, 2000. View at Google Scholar · View at Scopus
  10. D. Vaccaneo, L. Sambuelli, P. Marini, R. Tascone, and R. Orta, “Measurement system of complex permittivity of ornamental rocks in L frequency band,” IEEE Transactions on Geoscience and Remote Sensing, vol. 42, no. 11, pp. 2490–2498, 2004. View at Publisher · View at Google Scholar
  11. S. Saponara, F. Iacopetti, A. Carrafiello, E. Valentini, L. Fanucci, and B. Neri, “Capacitive sensors for process control in industrial marble machines,” in Proceedings of the 5th IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS '09), pp. 142–147, Rende, Italy, September 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Osoincah, “Proximity capacitive sensor technology for touch sensing applications,” Freescale White Paper, 2007. View at Google Scholar
  13. S. Saponara, F. Iacopetti, A. Carrafiello, L. Fanucci, B. Neri, and R. Massini, “Experimental analysis towards the application of RFID technologies in industrial marble machines,” in Proceedings of the 5th IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS '09), pp. 67–71, Rende, Italy, September 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. I. Ar and Y. S. Akgul, “A generic system for the classification of marble tiles using Gabor filters,” in Proceedings of the 23rd International Symposium on Computer and Information Sciences (ISCIS '08), pp. 1–6, October 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Martínez-Alajarín, J. D. Luis-Delgado, and L. M. Tomás-Balibrea, “Automatic system for quality-based classification of marble textures,” IEEE Transactions on Systems, Man and Cybernetics Part C, vol. 35, no. 4, pp. 488–497, 2005. View at Publisher · View at Google Scholar
  16. K. Finkenzeller, RFID Handbook: Fundamentals and Applications in Contactless Smart Cards, Radio Frequency Identification and Near-Field Communication, John Wiley & Sons, 3rd edition, 2010.
  17. RFIDline, “RFid project: special technology on marble and granite,” 2007, http://www.rfidstone.com.
  18. R. Wessel, “Italian stone supplier uses RFID to track marble, granite,” RFIDJournal, 2007.
  19. K. Kwon, J. Ryu, J. Sohn, and I. Chung, “Intelligent process control system with RFID cuboid,” in Proceedings of the 11th International Conference on Electronic Commerce (ICEC '09), pp. 1–8, Taipei, Taiwan, 2009. View at Publisher · View at Google Scholar
  20. G. Fenu and P. Garau, “RFID- based supply chain traceability system,” in Proceedings of the 35th Annual Conference of the IEEE Industrial Electronics Society (IECON '09), pp. 2672–2677, November 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. B. S. Choi, J. W. Lee, and J. J. Lee, “An improved localization system with RFID technology for a mobile robot,” in Proceedings of the 34th Annual Conference of the IEEE Industrial Electronics Society (IECON '08), pp. 3409–3413, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. EM Microelectronic, “EM4102 Read only contact less identification device,” 2005.
  23. PSION Teklogic, “Workabout Pro guide,” 2004.
  24. CAEN SpA, “A928 long range UHF reader data sheet,” 2007, http://www.caen.it/rfid.
  25. Open 2.4 GHz RFID Sputnik, http://www.openbeacon.org.
  26. Y.-C. Choi, M.-W. Seo, Y.-H. Kim, and H.-J. Yoo, “A multi standard 13.56 MHz RFID reader system,” in Proceedings of the International Technical Conference on Circuit/System, Computers and Communications (ITC-CSCC '08), pp. 1073–1076, 2008.
  27. N. Choi et al., “Design of a 13.56 MHz RFID system,” in Proceedings of the 14th International Conference on Advanced Communication Technology (ICACT '12), pp. 840–843, 2006.
  28. Beijing Hongchangtag Tech-Sci Development Inc, “HCT-HFR-80507,” 2012, http://www.hongchangtag.com/product.asp?id=15&f1id=1&f2id=19&f1=3.
  29. M. Chaplin, “Water structure and science; water and microwaves,” http://www.lsbu.ac.uk/water.
  30. M. Kollar, “Measurement of capacitances based on a flip-flop sensor,” Sensors & Transducers Magazine, vol. 35, no. 8-9, pp. 1–7, 2003. View at Google Scholar
  31. G. Brasseur, “Design rules for robust capacitive sensors,” IEEE Transactions on Instrumentation and Measurement, vol. 52, no. 4, pp. 1261–1265, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. L. Fanucci, S. Saponara, and A. Morello, “Power optimization of an 8051-compliant IP microcontroller,” IEICE Transactions on Electronics, vol. 88, no. 4, pp. 597–600, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. D. Dugdale, Essentials of Electromagnetism, The Macmillan Press, London, UK, 1993.
  34. F. Marco, System and method for a plant for working natural stones. European Patent Application 10425405.7, 2010.