Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2008 (2008), Article ID 853275, 15 pages
http://dx.doi.org/10.1155/2008/853275
Research Article

Fault Detection, Isolation, and Accommodation for LTI Systems Based on GIMC Structure

1Facultad de Ciencias, Zona Universitaria, Universidad Autonoma de San Luis Potosí, San Luis Potosí, SLP 78290, Mexico
2Facultad de Ingeniería, Universidad Autonoma de San Luis Potosí, Av. Dr. Manuel Nava 8, Zona Universitaria, SLP 78290 C.P., Mexico

Received 31 December 2006; Revised 28 July 2007; Accepted 13 November 2007

Academic Editor: Kemin Zhou

Copyright © 2008 D. U. Campos-Delgado et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Chen and R. J. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems, Kluwer Academic, Dordrecht, The Netherlands, 1999.
  2. R. Isermann and P. Ballé, “Trends in the application of model-based fault detection and diagnosis of technical processes,” Control Engineering Practice, vol. 5, no. 5, pp. 709–719, 1997. View at Publisher · View at Google Scholar
  3. R. Isermann, Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance, Springer, New York, NY, USA, 2006.
  4. A. Saberi, A. A. Stoorvogel, P. Sannuti, and H. Niemann, “Fundamental problems in fault detection and identification,” International Journal of Robust and Nonlinear Control, vol. 10, no. 14, pp. 1209–1236, 2000. View at Publisher · View at Google Scholar
  5. M. Blanke, R. Izadi-Zamanabadi, S. A. Bøgh, and C. P. Lunau, “Fault-tolerant control systems—a holistic view,” Control Engineering Practice, vol. 5, no. 5, pp. 693–702, 1997. View at Publisher · View at Google Scholar
  6. M. Blanke, M. Kinnaert, J. Lunze, and M. Staroswiecki, Diagnosis and Fault-Tolerant Control, Springer, New York, NY, USA, 2003.
  7. D. U. Campos-Delgado and K. Zhou, “Reconfigurable fault-tolerant control using GIMC structure,” IEEE Transactions on Automatic Control, vol. 48, no. 5, pp. 832–838, 2003. View at Publisher · View at Google Scholar
  8. H. Noura, D. Sauter, F. Hamelin, and D. Theilliol, “Fault-tolerant control in dynamic systems: application to a winding machine,” IEEE Control Systems Magazine, vol. 20, no. 1, pp. 33–49, 2000. View at Publisher · View at Google Scholar
  9. J. Stoustrup and V. D. Blondel, “Fault tolerant control: a simultaneous stabilization result,” IEEE Transactions on Automatic Control, vol. 49, no. 2, pp. 305–310, 2004. View at Publisher · View at Google Scholar
  10. D. Kim and Y. Kim, “Robust variable structure controller design for fault tolerant flight control,” Journal of Guidance, Control, and Dynamics, vol. 23, no. 3, pp. 430–437, 2000. View at Google Scholar
  11. P. Zhang, S. X. Ding, G. Z. Wang, T. Jeinsch, and D. H. Zhou, “Application of robust observer-based FDI systems to fault tolerant control,” in Proceedings of the 15th Triennial IFAC World Congress, Barcelona, Spain, 2002.
  12. K. Zhou and Z. Ren, “A new controller architecture for high performance, robust, and fault-tolerant control,” IEEE Transactions on Automatic Control, vol. 46, no. 10, pp. 1613–1618, 2001. View at Publisher · View at Google Scholar
  13. J.-Y. Shin, N. E. Wu, and C. Belcastro, “Adaptive linear parameter varying control synthesis for actuator failure,” Journal of Guidance, Control, and Dynamics, vol. 27, no. 5, pp. 787–794, 2004. View at Google Scholar
  14. J.-Y. Shin and C. M. Belcastro, “Performance analysis on fault tolerant control system,” IEEE Transactions on Control Systems Technology, vol. 14, no. 5, pp. 920–925, 2006. View at Publisher · View at Google Scholar
  15. M. Ji, Z. Zhang, G. Biswas, and N. Sarkar, “Hybrid fault adaptive control of a wheeled mobile robot,” IEEE/ASME Transactions on Mechatronics, vol. 8, no. 2, pp. 226–233, 2003. View at Publisher · View at Google Scholar
  16. X. Zhang, T. Parisini, and M. M. Polycarpou, “Adaptive fault-tolerant control of nonlinear uncertain systems: an information-based diagnostic approach,” IEEE Transactions on Automatic Control, vol. 49, no. 8, pp. 1259–1274, 2004. View at Publisher · View at Google Scholar
  17. D. U. Campos-Delgado, E. R. Palacios, and D. R. Espinoza-Trejo, “Fault accommodation strategy for LTI systems based on GIMC structure: additive faults,” in Proceedings of the 44th IEEE Conference on Decision and Control, and the European Control Conference (CDC-ECC '05), vol. 2005, pp. 6292–6297, Seville, Spain, December 2005. View at Publisher · View at Google Scholar
  18. D. U. Campos-Delgado, S. Martínez-Martínez, and K. Zhou, “Integrated fault-tolerant scheme for a DC speed drive,” IEEE/ASME Transactions on Mechatronics, vol. 10, no. 4, pp. 419–427, 2005. View at Publisher · View at Google Scholar
  19. G. E. Dullerud and F. Paganini, A Course in Robust Control Theory, Springer, New York, NY, USA, 2000.
  20. K. Zhou, J. C. Doyle, and K. Glover, Robust and Optimal Control, Prentice Hall, Upper Saddle River, NJ, USA, 1996.
  21. S. X. Ding, T. Jeinsch, P. M. Frank, and E. L. Ding, “A unified approach to the optimization of fault detection systems,” International Journal of Adaptive Control and Signal Processing, vol. 14, no. 7, pp. 725–745, 2000. View at Publisher · View at Google Scholar
  22. B. Marx, D. Koenig, and D. Georges, “Robust fault-tolerant control for descriptor systems,” IEEE Transactions on Automatic Control, vol. 49, no. 10, pp. 1869–1875, 2004. View at Publisher · View at Google Scholar
  23. H. Niemann and J. Stoustrup, “Fault tolerant controllers for sampled-data systems,” in Proceedings of the American Control Conference, vol. 4, pp. 3490–3495, 2004.
  24. S. S. Yang and J. Chen, “Sensor faults compensation for MIMO fault-tolerant control systems,” Transactions of the Institute of Measurement and Control, vol. 28, no. 2, pp. 187–205, 2006. View at Publisher · View at Google Scholar
  25. N. Liu and K. Zhou, “Optimal solutions to multi-objective robust fault detection problems,” in Proccedings of the 2007 IEEE Conference on Decision and Control, New Orleans, LA, USA, December 2007.
  26. H. Niemann and J. Stoustrup, “Fault diagnosis for non-mininum phase systems using H optimization,” in Proceedings of the American Control Conference, vol. 6, pp. 4432–4436, 2001.
  27. A. Emami-Naeini, M. M. Akhter, and S. M. Rock, “Effect of model uncertainty on failure detection: the threshold selector,” IEEE Transactions on Automatic Control, vol. 33, no. 12, pp. 1106–1116, 1988. View at Publisher · View at Google Scholar
  28. M. G. Perhinschi, M. R. Napolitano, G. Campa, B. Seanor, J. Burken, and R. Larson, “An adaptive threshold approach for the design of an actuator failure detection and identification scheme,” IEEE Transactions on Control Systems Technology, vol. 14, no. 3, pp. 519–525, 2006. View at Publisher · View at Google Scholar
  29. J. Jiang and Y. Zhang, “Accepting performance degradation in fault-tolerant control system design,” IEEE Transactions on Control Systems Technology, vol. 14, no. 2, pp. 284–292, 2006. View at Publisher · View at Google Scholar
  30. R. Krishnan, Electric Motor Drives: Modeling, Analysis, and Control, Prentice Hall, Upper Saddle River, NJ, USA, 2001.
  31. http://www.scilab.org/.
  32. http://www.octave.org/.