Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2011, Article ID 926712, 10 pages
Research Article

Generalized Quadratic Linearization of Machine Models

1Department of Electrical and Electronics Engineering Department, Hindustan of Science & Technology, Chennai 603103, India
2Department of Electrical and Electronics Engineering, SSN College of Engineering Kalavakkam 603110, India

Received 10 May 2011; Revised 17 August 2011; Accepted 26 August 2011

Academic Editor: Derong Liu

Copyright © 2011 Parvathy Ayalur Krishnamoorthy et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Jianhua Zhao, and Dianrong Gao, “Dynamic characteristic comparison of open-type hydrostatic worktable both before and after linearization,” Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, vol. 48, no. 24, pp. 158–163, 2012. View at Publisher · View at Google Scholar
  • Rajagopalan Devanathan, Kamaraj, and Parvathy, “Analysis and application of quadratic linearization to the control of permanent magnet synchronous motor,” International Journal on Electrical Engineering and Informatics, vol. 6, no. 4, pp. 644–664, 2014. View at Publisher · View at Google Scholar
  • Janakiraman, and Rajagopalan Devanathan, “An Analysis of Quadratic Linearization of Three Phase Horizontal Gravity Separator,” 2018 5th International Conference on Control, Decision and Information Technologies, CoDIT 2018, pp. 1006–1011, 2018. View at Publisher · View at Google Scholar