Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2014, Article ID 486140, 16 pages
http://dx.doi.org/10.1155/2014/486140
Research Article

FxLMS Method for Suppressing In-Wheel Switched Reluctance Motor Vertical Force Based on Vehicle Active Suspension System

The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China

Received 27 January 2014; Revised 27 April 2014; Accepted 16 May 2014; Published 4 June 2014

Academic Editor: Yang Shi

Copyright © 2014 Yan-yang Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Murata, “Innovation by in-wheel-motor drive unit,” Vehicle System Dynamics, vol. 50, no. 6, pp. 807–830, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. E. Katsuyama, “Decoupled 3D moment control using in-wheel motors,” Vehicle System Dynamics, vol. 51, no. 1, pp. 18–31, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Nam, H. Fujimoto, and Y. Hori, “Lateral stability control of in-wheel-motor-driven electric vehicles based on sideslip angle estimation using lateral tire force sensors,” IEEE Transactions on Vehicular Technology, vol. 61, no. 5, pp. 1972–1985, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. X. D. Xue, K. W. E. Cheng, T. W. Ng, and N. C. Cheung, “Multi-objective optimization design of in-wheel switched reluctance motors in electric vehicles,” IEEE Transactions on Industrial Electronics, vol. 57, no. 9, pp. 2980–2987, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. J. de Santiago, H. Bernhoff, B. Ekergård et al., “Electrical motor drivelines in commercial all-electric vehicles: a review,” IEEE Transactions on Vehicular Technology, vol. 61, no. 2, pp. 475–484, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Urase, K. Kiyota, H. Sugimoto, and A. Chiba, “Design of a switched reluctance generator competitive with the IPM generator in hybrid electrical vehicles,” in Proceedings of the 15th International Conference on Electrical Machines and Systems (ICEMS '12), pp. 1–6, Sapporo, Japan, October 2012. View at Scopus
  7. K. M. Rahman, B. Fahimi, G. Suresh, A. V. Rajarathnam, and M. Ehsani, “Advantages of switched reluctance motor applications to EV and HEV: design and control issues,” IEEE Transactions on Industry Applications, vol. 36, no. 1, pp. 111–121, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Gao and M. D. McCulloch, “A review of high power density switched reluctance machines suitable for automotive applications,” in Proceedings of the 20th International Conference on Electrical Machines (ICEM '12), pp. 2610–2614, September 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Torkaman, E. Afjei, and H. Amiri, “Dynamic eccentricity fault diagnosis in switched reluctance motor,” in Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM '10), pp. 519–522, Taormina, Italy, June 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Marques dos Santos, J. Anthonis, and F. Naclerio, “Multiphysics NVH modeling: simulation of a switched reluctance motor drivetrain for an electric vehicle,” IEEE Transactions on Industrial Electronics, vol. 61, no. 1, pp. 469–476.
  11. M. Divandari and A. Dadpour, “Radial force and torque ripple optimization for acoustic noise reduction of SRM drives via fuzzy logic control,” in Proceedings of the 9th IEEE/IAS International Conference on Industry Applications (INDUSCON '10), pp. 1–6, Sao Paulo, Brazil, November 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. E. Afjei and H. Torkaman, “Airgap eccentricity fault diagnosis in switched reluctance motor,” in Proceedings of the 1st Power Electronics and Drives, Systems and Technologies Conference (PEDSTC '10), pp. 290–294, Tehran, Iran, February 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. M. N. Anwar, I. Husain, and A. V. Radun, “A comprehensive design methodology for switched reluctance machines,” IEEE Transactions on Industry Applications, vol. 37, no. 6, pp. 1684–1692, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. K. Kiyota and A. Chiba, “Design of switched reluctance motor competitive to 60-kW IPMSM in third-generation hybrid electric vehicle,” IEEE Transactions on Industry Applications, vol. 48, no. 6, pp. 2303–2309, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Fahimi, G. Suresh, and M. Ehsani, “Design considerations of switched reluctance motors: vibration and control issues,” in Proceedings of the 1999 IEEE Industry Applications Conference, pp. 2259–2266, October 1999. View at Scopus
  16. C. Sikder, I. Husain, and Y. Sozer, “Switched reluctance generator controls for optimal power generation with current regulation,” in Proceedings of the 4th Annual IEEE Energy Conversion Congress and Exposition (ECCE '12), pp. 4322–4329, Raleigh, NC, USA, September 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Inagaki, H. Kato, and H. Kuzuya, “Drive train vibration and acoustic noise reduction control of switched reluctance motor for electric vehicle,” SAE Technical Papers 6183176, SAE.
  18. F. L. M. dos Santos, J. Anthonis, and H. van der Auweraer, “Multiphysics thermal and NVH modeling: integrated simulation of a switched reluctance motor drivetrain for an electric vehicle,” in Proceedings of the IEEE International Electric Vehicle Conference (IEVC '12), pp. 1–7, March 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Li and Y. Cho, “Dynamic reduction of unbalanced magnetic force and vibration in switched reluctance motor by the parallel paths in windings,” Mathematics and Computers in Simulation, vol. 81, no. 2, pp. 407–419, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. B. M. Ebrahimi, J. Faiz, and M. J. Roshtkhari, “Static-, dynamic-, and mixed-eccentricity fault diagnoses in permanent-magnet synchronous motors,” IEEE Transactions on Industrial Electronics, vol. 56, no. 11, pp. 4727–4739, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Faiz and S. Pakdelian, “Finite element analysis of switched reluctance motor under dynamic eccentricity fault,” in Proceedings of the 12th International Power Electronics and Motion Control Conference, pp. 1042–1046, September 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. N. K. Sheth and K. R. Rajagopal, “Effects of nonuniform airgap on the torque characteristics of a switched reluctance motor,” IEEE Transactions on Magnetics, vol. 40, no. 4, pp. 2032–2034, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. I. Husain and A. Radun, “Unbalanced force calculation in switched-reluctance machines,” IEEE Transactions on Magnetics, vol. 36, no. 1, pp. 330–338, 2000. View at Google Scholar · View at Scopus
  24. N. K. Sheth and K. R. Rajagopal, “Variations in overall developed torque of a switched reluctance motor with airgap nonuniformity,” IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3973–3975, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. K. R. Rajagopal, B. Singh, and B. P. Singh, “Static torque profiles of a hybrid stepper motor having relative eccentricity between stator and rotor axes,” Journal of Applied Physics, vol. 93, no. 10, pp. 8701–8703, 2003. View at Publisher · View at Google Scholar · View at Scopus
  26. S. B. A. Kashem, M. Ektesabi, and R. Nagarajah, “Comparison between different sets of suspension parameters and introduction of new modified skyhook control strategy incorporating varying road condition,” Vehicle System Dynamics, vol. 50, no. 7, pp. 1173–1190, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. R. D. Naik and P. M. Singru, “Resonance, stability and chaotic vibration of a quarter-car vehicle model with time-delay feedback,” Communications in Nonlinear Science and Numerical Simulation, vol. 16, no. 8, pp. 3397–3410, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. B. L. J. Gysen, J. J. H. Paulides, J. L. G. Janssen, and E. A. Lomonova, “Active electromagnetic suspension system for improved vehicle dynamics,” IEEE Transactions on Vehicular Technology, vol. 59, no. 3, pp. 1156–1163, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. N. H. Amer, R. Ramli, H. M. Isa, W. N. L. Mahadi, and M. A. Z. Abidin, “A review of energy regeneration capabilities in controllable suspension for passengers' car,” Energy Education Science and Technology A: Energy Science and Research, vol. 30, no. 1, pp. 143–158, 2012. View at Google Scholar · View at Scopus
  30. D. A. Torrey, X.-M. Niu, and E. J. Unkauf, “Analytical modelling of variable-reluctance machine magnetisation characteristics,” IEE Proceedings: Electric Power Applications, vol. 142, no. 1, pp. 14–22, 1995. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Le-Huy and P. Brunelle, “A versatile nonlinear switched reluctance motor model in simulink using realistic and analytical magnetization characteristics,” in Proceedings of the 31st Annual Conference of IEEE Industrial Electronics Society, pp. 1556–1561, Raleigh, NC, USA, November 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. D. Cajander and H. Le-Huy, “Design and optimization of a torque controller for a switched reluctance motor drive for electric vehicles by simulation,” Mathematics and Computers in Simulation, vol. 71, no. 4–6, pp. 333–344, 2006. View at Publisher · View at Google Scholar · View at Scopus
  33. R. Krishnan, Switched Reluctance Motor Drives-Modeling, Simulation, Analysis, Design, and Applications, CRC press, Boca Raton, Fla, USA, 2001.
  34. J. Liang, D.-H. Lee, and J.-W. Ahn, “Direct instantaneous torque control of switched reluctance machines using 4-level converters,” IET Electric Power Applications, vol. 3, no. 4, pp. 313–323, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. N. R. Garrigan, W. L. Soong, and C. M. Stephens, “Radial force characteristics of a switched reluctance machine,” in Proceedings of the 1999 IEEE Industry Applications Conference, pp. 2250–2258, Phoenix, Ariz, USA, October 1999. View at Scopus
  36. K. T. Chau, D. Zhang, J. Z. Jiang, C. Liu, and Y. Zhang, “Design of a magnetic-geared outer-rotor permanent-magnet brushless motor for electric vehicles,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2504–2506, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. L. Jiongkang, K. W. E. Cheng, and Z. Zhu, “Experimental investigation of in-wheel switched reluctance motor driving system for future electric vehicles,” in Proceedings of the 3rd International Conference on Power Electronics Systems and Applications (PESA '09), pp. 1–6, Hong Kong, May 2009. View at Scopus
  38. A. Labak and N. C. Kar, “Outer rotor switched reluctance motor design for in-wheel drive of electric bus applications,” in Proceedings of the 20th International Conference on Electrical Machines (ICEM '12), pp. 418–423, Marseille, France, September 2012. View at Publisher · View at Google Scholar · View at Scopus
  39. S. Ayari, M. Besbes, M. Lecrivain, and M. Gabsi, “Effects of the airgap eccentricity on the SRM vibrations,” in Proceedings of the International Conference Electric Machines and Drives, pp. 138–140, 1999.
  40. H. Torkaman and E. Afjei, “Magnetostatic field analysis regarding the effects of dynamic eccentricity in switched reluctance motor,” Progress in Electromagnetics Research, vol. 8, pp. 163–180, 2009. View at Google Scholar
  41. I. Husain, “Minimization of torque ripple in SRM drives,” IEEE Transactions on Industrial Electronics, vol. 49, no. 1, pp. 28–39, 2002. View at Publisher · View at Google Scholar · View at Scopus
  42. Y. A. Beromi, Z. Moravej, and S. Darabi, “Torque ripple reduction of switched reluctance motor using PID fuzzy logic controller,” in Proceedings of the 7th International Conference and Exposition on Electrical and Power Engineering (EPE '12), pp. 456–459, Iasi, Romania, October 2012. View at Publisher · View at Google Scholar · View at Scopus
  43. S. M. Kuo and D. R. Morgan, Active Noise Control Systems, Wiley, New York, NY, USA, 1996.
  44. L. Vicente and E. Masgrau, “Novel FxLMS convergence condition with deterministic reference,” IEEE Transactions on Signal Processing, vol. 54, no. 10, pp. 3768–3774, 2006. View at Publisher · View at Google Scholar · View at Scopus
  45. D. Zhou and V. DeBrunner, “Efficient adaptive nonlinear filters for nonlinear active noise control,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 54, no. 3, pp. 669–681, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. D. Karnopp, “Active damping in road vehicle suspension systems,” Vehicle System Dynamics, vol. 12, no. 6, pp. 291–316, 1983. View at Google Scholar · View at Scopus
  47. C. Ting, T. S. Li, and F. Kung, “Design of fuzzy controller for active suspension system,” Mechatronics, vol. 5, no. 4, pp. 365–383, 1995. View at Google Scholar · View at Scopus