Table of Contents Author Guidelines Submit a Manuscript
Journal of Control Science and Engineering
Volume 2018, Article ID 5127505, 16 pages
https://doi.org/10.1155/2018/5127505
Research Article

An Integrated FDD Approach for an Intensified HEX/Reactor

1Electrical Engineering School, Guizhou University, Guiyang 550025, China
2CNRS, LGC, 31030 Toulouse, France
3LGC, Université de Toulouse, UPS, 31030 Toulouse, France
4CNRS, LAAS, 31400 Toulouse, France
5LAAS, Université de Toulouse, UPS, 31400 Toulouse, France

Correspondence should be addressed to Ze-tao Li; moc.361@tzlygzg

Received 21 August 2017; Revised 15 November 2017; Accepted 23 November 2017; Published 14 January 2018

Academic Editor: Ai-Guo Wu

Copyright © 2018 Mei Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Anxionnaz, M. Cabassud, C. Gourdon, and P. Tochon, “Heat exchanger/reactors (HEX reactors): Concepts, technologies: State-of-the-art,” Chemical Engineering and Processing: Process Intensification, vol. 47, no. 12, pp. 2029–2050, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. N. Di Miceli Raimondi, N. Olivier-Maget, N. Gabas, M. Cabassud, and C. Gourdon, “Safety enhancement by transposition of the nitration of toluene from semi-batch reactor to continuous intensified heat exchanger reactor,” Chemical Engineering Research and Design, vol. 94, pp. 182–193, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. D. Fragkoulis, G. Roux, and B. Dahhou, “Detection, isolation and identification of multiple actuator and sensor faults in nonlinear dynamic systems: Application to a waste water treatment process,” Applied Mathematical Modelling, vol. 35, no. 1, pp. 522–543, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Li and B. Dahhou, “A new fault isolation and identification method for nonlinear dynamic systems: Application to a fermentation process,” Applied Mathematical Modelling, vol. 32, no. 12, pp. 2806–2830, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Kettunen, P. Zhang, and S.-L. Jämsä-Jounela, “An embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process,” Computers & Chemical Engineering, vol. 32, no. 12, pp. 2966–2985, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Ruiz, J. Cantón, J. M. Nougués, A. Espuña, and L. Puigjaner, “On-line fault diagnosis system support for reactive scheduling in multipurpose batch chemical plants,” Computers & Chemical Engineering, vol. 25, no. 4–6, pp. 829–837, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Van den Kerkhof, G. Gins, J. Vanlaer, and J. F. M. Van Impe, “Dynamic model-based fault diagnosis for (bio)chemical batch processes,” Computers & Chemical Engineering, vol. 40, pp. 12–21, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Benaissa, S. Elgue, N. Gabas, M. Cabassud, D. Carson, and M. Demissy, “Dynamic behaviour of a continuous heat exchanger/reactor after flow failure,” International Journal of Chemical Reactor Engineering, vol. 6, article A23, pp. 1–21, 2008. View at Google Scholar · View at Scopus
  9. S. Li, S. Bahroun, C. Valentin, C. Jallut, and F. De Panthou, “Dynamic model based safety analysis of a three-phase catalytic slurry intensified continuous reactor,” Journal of Loss Prevention in the Process Industries, vol. 23, no. 3, pp. 437–445, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Niedbalski, D. Johnson, S. S. Patnaik, and D. Banerjee, “Study of a multi-phase hybrid heat exchanger-reactor (HEX reactor): Part II - Numerical prediction of thermal performance,” International Journal of Heat and Mass Transfer, vol. 70, pp. 1086–1094, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Haugwitz, P. Hagander, and T. Norén, Modeling, Control and Optimization of a Plate Reactor, Lund University, 2007. View at Scopus
  12. S. Li, S. Bahroun, C. Valentin, C. Jallut, and F. De Panthou, “Control and optimization of a three-phase catalytic slurry intensified continuous chemical reactor,” Journal of Process Control, vol. 220, no. 5, pp. 664–675, 2010. View at Google Scholar
  13. A. Zavala-Río and R. Santiesteban-Cos, “Reliable compartmental models for double-pipe heat exchangers: An analytical study,” Applied Mathematical Modelling, vol. 31, no. 9, pp. 1739–1752, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. K. W. Mathisen, M. Morari, and S. Skogestad, “Dynamic models for heat exchangers and heat exchanger networks,” Computers & Chemical Engineering, vol. 18, pp. S459–S463, 1994. View at Publisher · View at Google Scholar · View at Scopus
  15. P. S. Varbanov, J. J. Klemeš, and F. Friedler, “Cell-based dynamic heat exchanger models-Direct determination of the cell number and size,” Computers & Chemical Engineering, vol. 35, no. 5, pp. 943–948, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Bracco, I. Faccioli, and M. Troilo, “A numerical discretization method for the dynamic simulation of a double-pipe heat exchanger,” International Journal of Energy, vol. 1, no. 3, pp. 47–58, 2007. View at Google Scholar
  17. E. Weyer, G. Szederkényi, and K. Hangos, “Grey box fault detection of heat exchangers,” Control Engineering Practice, vol. 8, no. 2, pp. 121–131, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Besançon, “Remarks on nonlinear adaptive observer design,” Systems & Control Letters, vol. 41, no. 4, pp. 271–280, 2000. View at Publisher · View at Google Scholar · View at MathSciNet
  19. R. F. Escobar, C. M. Astorga-Zaragoza, A. C. Tllez-Anguiano, D. Jurez-Romero, J. A. Hernndez, and G. V. Guerrero-Ramrez, “Sensor fault detection and isolation via high-gain observers: application to a double-pipe heat exchanger,” ISA Transactions, vol. 50, no. 3, pp. 480–486, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Caccavale, F. Pierri, M. Iamarino, and V. Tufano, “An integrated approach to fault diagnosis for a class of chemical batch processes,” Journal of Process Control, vol. 19, no. 5, pp. 827–841, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Persin and B. Tovornik, “Real-time implementation of fault diagnosis to a heat exchanger,” Control Engineering Practice, vol. 13, no. 8, pp. 1061–1069, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. O. A. Z. Sotomayor and D. Odloak, “Observer-based fault diagnosis in chemical plants,” Chemical Engineering Journal, vol. 112, no. 1–3, pp. 93–108, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. G. R. Jonsson, S. Lalot, O. P. Palsson, and B. Desmet, “Use of extended Kalman filtering in detecting fouling in heat exchangers,” International Journal of Heat and Mass Transfer, vol. 50, no. 13-14, pp. 2643–2655, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. C.-M. Astorga-Zaragoza, A. Zavala-Río, V. M. Alvarado, R.-M. Méndez, and J. Reyes-Reyes, “Performance monitoring of heat exchangers via adaptive observers,” Measurement, vol. 40, no. 4, pp. 392–405, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. F. Pierri, G. Paviglianiti, F. Caccavale, and M. Mattei, “Observer-based sensor fault detection and isolation for chemical batch reactors,” Engineering Applications of Artificial Intelligence, vol. 21, no. 8, pp. 1204–1216, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Delrot, T. M. Guerra, M. Dambrine, and F. Delmotte, “Fouling detection in a heat exchanger by observer of Takagi-Sugeno type for systems with unknown polynomial inputs,” Engineering Applications of Artificial Intelligence, vol. 25, no. 8, pp. 1558–1566, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. C.-M. Astorga-Zaragoza, V.-M. Alvarado-Martínez, A. Zavala-Río, R.-M. Méndez-Ocaña, and G.-V. Guerrero-Ramírez, “Observer-based monitoring of heat exchangers,” ISA Transactions®, vol. 47, no. 1, pp. 15–24, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Delmotte, M. Dambrine, S. Delrot, and S. Lalot, “Fouling detection in a heat exchanger: A polynomial fuzzy observer approach,” Control Engineering Practice, vol. 21, no. 10, pp. 1386–1395, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. A. M. Benkouider, R. Kessas, A. Yahiaoui, J. C. Buvat, and S. Guella, “A hybrid approach to faults detection and diagnosis in batch and semi-batch reactors by using EKF and neural network classifier,” Journal of Loss Prevention in the Process Industries, vol. 25, no. 4, pp. 694–702, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. F. Théron, Z. Anxionnaz-Minvielle, M. Cabassud, C. Gourdon, and P. Tochon, “Characterization of the performances of an innovative heat-exchanger/reactor,” Chemical Engineering and Processing: Process Intensification, vol. 82, pp. 30–41, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Farza, K. Busawon, and H. Hammouri, “Simple Nonlinear Observers for On-line Estimation of Kinetic Rates in Bioreactors,” Automatica, vol. 34, no. 3, pp. 301–318, 1998. View at Publisher · View at Google Scholar · View at Scopus