Reproducibility Experimentation among Computer-Aided Inspection Software from a Single Point Cloud

Table 3

Results of inspection circle #2 (20 mm).

Algorithm					Circularity
#1
Best-fit	0.049	−0.046	19.874	−0.126	0.186
Min	0.046	−0.053	19.760	−0.240	0.186
Max	0.046	−0.010	20.091	0.091	0.186
#2
Least square	0.048	−0.043	19.874	−0.126	0.205
Max inscribed	0.046	−0.049	19.760	−0.240	0.208
Min circumscribed	0.045	−0.007	20.091	0.091	0.195
Minimax	0.058	−0.007	19.907	−0.093	0.185
#3
Best-fit	0.0635	−0.0312	19.873	−0.126	0.034
Min	0.0725	0.0049	19.721	−0.279	0.034
Max	0.0725	0.0049	20.093	0.093	0.034