Reproducibility Experimentation among Computer-Aided Inspection Software from a Single Point Cloud

Table 4

Results for the inspection of the oblong hole (width = 13.333 mm and length = 22.666 mm).

Software	Algorithm
#1	Best-fit	−0.143	22.487	−0.179	13.139	−0.194
	Min	−0.145	22.345	−0.321	12.989	−0.344
	Max	−0.134	22.605	−0.061	13.320	−0.013
#2	Least square	−0.143	22.478	−0.188	13.152	−0.180
	Max inscribed	−0.145	22.306	−0.36	13.048	−0.284
	Min circumscribed	−0.138	22.607	−0.059	13.316	−0.016
	Minimax	−0.144	22.479	−0.187	13.164	−0.168
#3	Best-fit	−0.132	22.478	−0.187	13.151	−0.182
	Min	−0.132	22.321	−0.345	12.994	−0.339
	Max	−0.132	22.646	0.020	13.320	−0.013