Table of Contents Author Guidelines Submit a Manuscript
Journal of Engineering
Volume 2014 (2014), Article ID 124247, 8 pages
http://dx.doi.org/10.1155/2014/124247
Research Article

Influence of Ultrasonic Burnishing Technique on Surface Quality and Change in the Dimensions of Metal Shafts

1Engineering Design and Production, Production Engineering, School of Science and Technology, Aalto University, Puumiehenkuja 3, 02150 Espoo, Finland
2School of Science and Technology, Aalto University, Puumiehenkuja 3, 02150 Espoo, Finland

Received 19 August 2014; Accepted 21 October 2014; Published 12 November 2014

Academic Editor: Sheng-Rui Jian

Copyright © 2014 Juha Huuki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Juha Huuki, Mikael Hornborg, and Jermu Juntunen, “Influence of Ultrasonic Burnishing Technique on Surface Quality and Change in the Dimensions of Metal Shafts,” Journal of Engineering, vol. 2014, Article ID 124247, 8 pages, 2014. doi:10.1155/2014/124247