Research Article
Influence of Ultrasonic Burnishing Technique on Surface Quality and Change in the Dimensions of Metal Shafts
Table 4
Out-of-roundness results.
| Material | Premachined surface [µm] | Finished surface [µm] | Difference [µm] | Relative [%] |
| Aluminium | 7.40 | 7.37 | 0.03 | −0.45 | 20.08 | 7.32 | 12.76 | −63.55 | 22.93 | 7.83 | 15.1 | −65.83 |
| S355J2 | 11.03 | 5.37 | 5.66 | −51.32 | 19.95 | 7.65 | 12.30 | −61.65 | 23.23 | 8.43 | 14.80 | −63.96 |
| 34-CrNiMo6 | 12.33 | 7.98 | 4.35 | −35.23 | 9.90 | 7.42 | 2.48 | −25.08 | 20.18 | 5.22 | 14.96 | −74.14 |
| Average | | 7.18 | | |
|
|