Combined Experimental and CFD Investigation of the Parabolic Shaped Solar Collector Utilizing Nanofluid (CuO-H<sub>2</sub>O and SiO<sub>2</sub>-H<sub>2</sub>O) as a Working Fluid

<table class="table-group" id="tab4"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Inlet</td><td class="align_center">Mass flow rate</td></tr><tr><td class="align_left">Outlet</td><td class="align_center">Out flow</td></tr><tr><td class="align_left">Wall (upper)</td><td class="align_center">Solar radiation as calculated by solar load cell and no slip condition</td></tr><tr><td class="align_left">Wall (lower)</td><td class="align_center">Heat flux (concentrated by mirror reflector)</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Various boundary conditions applied over HCE.

Journal of Engineering

tab4

Table 4

Table 4: Combined Experimental and CFD Investigation of the Parabolic Shaped Solar Collector Utilizing Nanofluid (CuO-H<sub>2</sub>O and SiO<sub>2</sub>-H<sub>2</sub>O) as a Working Fluid 

Table 4 | Combined Experimental and CFD Investigation of the Parabolic Shaped Solar Collector Utilizing Nanofluid (CuO-H2O and SiO2-H2O) as a Working Fluid 