Research Article
Physical Simulation of Colayer Water Flooding in Low Permeability Carbonate Reservoir in Middle East
Table 1
Physical parameters of core samples.
| Sample number | Length (cm) | Diameter (cm) | Permeability (10−3 μm2) | Porosity (%) | Irreducible water saturation (%) | Injection-production patterns |
| (I) | 6.263 | 3.786 | 6.061 | 23.05 | 42.99 | Co-in | (II) | 6.239 | 3.797 | 7.659 | 24.48 | 25.89 | Si-in | (III) | 6.364 | 3.787 | 15.491 | 20.53 | 27.87 | Co-in | (IV) | 6.502 | 3.551 | 19.447 | 14.52 | 26.99 | Si-in |
|
|
Note. Co-in represents 2-layer coinjection separate production; Si-in represents single layer injection and production.
|