Table of Contents Author Guidelines Submit a Manuscript
Journal of Electrical and Computer Engineering
Volume 2014, Article ID 198261, 7 pages
http://dx.doi.org/10.1155/2014/198261
Research Article

Performance Analysis of a Six-Port Receiver in a WCDMA Communication System including a Multipath Fading Channel

Intelligent RF Radio Technology Laboratory (iRadio Lab), Department of Electrical and Computer Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB, Canada T2N 1N4

Received 4 October 2013; Accepted 20 November 2013; Published 23 January 2014

Academic Editor: Alexander Koelpin

Copyright © 2014 A. O. Olopade and M. Helaoui. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Hueber, R. Stuhlberger, and A. Springer, “An adaptive digital front-end for multimode wireless receivers,” IEEE Transactions on Circuits and Systems II, vol. 55, no. 4, pp. 349–353, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Xie, O. Oliaei, P. Rakers et al., “Single-Chip Multiband EGPRS and SAW-less LTE WCDMA CMOS receiver with diversity,” IEEE Transactions on Microwave Theory and Techniques, vol. 60, no. 5, pp. 1390–1396, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Barrak, A. Ghazel, and F. Ghannouchi, “Optimized multistandard rf subsampling receiver architecture,” IEEE Transactions on Wireless Communications, vol. 8, no. 6, pp. 2901–2909, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Perez-Duenas, J. G. Wanguemert-Perez, and I. Molina-Fernandez, “Novel modulation scheme and six-port based RAKE receiver for DSUWB,” IEEE Transactions on Wireless Communications, vol. 8, no. 7, pp. 3628–3633, 2009. View at Publisher · View at Google Scholar
  5. A. O. Olopade, A. Hasan, and M. Helaoui, “Concurrent dual band six port receiver for multi-standard and software defined radio applications,” IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 12, pp. 4252–4261, 2013. View at Publisher · View at Google Scholar
  6. J. Li, R. G. Bosisio, and K. Wu, “Dual-tone calibration of six-port junction and its application to the six-port direct digital millimetric receiver,” IEEE Transactions on Microwave Theory and Techniques, vol. 44, no. 1, pp. 93–99, 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. T. Hentschel, “A simple IQ-regeneration technique for six-port communication receivers,” in Proceedings of the 1st International Symposium on Control, Communications and Signal Processing (ISCCSP '04), pp. 311–314, March 2004. View at Scopus
  8. A. Hasan and M. Helaoui, “Novel modeling and calibration approach for multiport receivers mitigating system imperfections and hardware impairments,” IEEE Transactions on Microwave Theory and Techniques, vol. 60, no. 8, pp. 2644–2653, 2012. View at Google Scholar
  9. B. Laemmle, G. Vinci, L. Maurer, R. Weigel, and A. Koelpin, “An integrated 77-GHz six-port receiver front-end for angle-of-arrival detection,” in Proceedings of the 25th IEEE Bipolar/BiCMOS Technology and Circuits Meeting (BCTM '11), pp. 219–222, October 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Khy and B. Huyart, “A 94GHz radar using a six-port reflectometer as a phase/frequency discriminator,” in Proceedings of the 2nd European Radar Conference (EURAD '05), pp. 233–236, October 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Håkansson and S. Gong, “Ultra-wideband six-port transmitter and receiver pair 3.1–4.8 GHz,” in Proceedings of the Asia Pacific Microwave Conference (APMC '08), pp. 1–4, December 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Bugo, B. Klippenstein, M. Saizew, M. Woods, and M. Helaoui, “Dual-band receiver using passive six-port down-conversion technique suitable for multi-standards and SDR applications,” in Proceedings of the Asia Pacific Microwave Conference (APMC '10), pp. 1312–1315, December 2010. View at Scopus
  13. G. Colef, P. R. Karmel, and M. Ettenberg, “New in-situ calibration of diode detectors used in six-port network analyzers,” IEEE Transactions on Instrumentation and Measurement, vol. 39, no. 1, pp. 201–204, 1990. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Lindner, F. Barbon, G. Vinci, R. Weigel, and A. Koelpin, “Initial calibration procedure of a six-port receiver system for complex data reception,” in Proceedings of the 2nd European Radar Conference (EURAD '12), pp. 570–573, 2012.
  15. X. Z. Xiong and C. Iiao, “Calibration methods of microwave diode detectors,” in Proceedings of the Asia-Pacific Microwave Conference (APMC '05), vol. 5, December 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. WCDMA End-to-End Physical Layer, http://www.mathworks.com/help/comm/examples/wcdma-end-to-end-physical-layer.html.