Table of Contents Author Guidelines Submit a Manuscript
Journal of Healthcare Engineering
Volume 2017, Article ID 1439643, 8 pages
https://doi.org/10.1155/2017/1439643
Research Article

New Directions in 3D Medical Modeling: 3D-Printing Anatomy and Functions in Neurosurgical Planning

1Institute of Biomedical and Neural Engineering/Medical Technology Center, Reykjavik University and Landspitali University Hospital, Menntavegi 1, 101 Reykjavik, Iceland
2Department of Neurosurgery, Landspitali University Hospital, Áland, 108 Reykjavik, Iceland

Correspondence should be addressed to Paolo Gargiulo; si.ilatipsdnal@ragoloap

Received 2 March 2017; Accepted 13 April 2017; Published 8 June 2017

Academic Editor: Pan Lin

Copyright © 2017 Paolo Gargiulo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • Tom H. van de Belt, Hugo Nijmeijer, Mark ter Laan, David Grim, Lucien J.L.P.G. Engelen, Rinaldo Vreeken, and Marleen M.H.J. van Gelder, “Patient-Specific Actual-Size Three-Dimensional Printed Models for Patient Education in Glioma Treatment: First Experiences,” World Neurosurgery, vol. 117, pp. e99–e105, 2018. View at Publisher · View at Google Scholar
  • Nelson Rodrigues, Karim Mithani, Ying Meng, Nir Lipsman, and Clement Hamani, “The Emerging Role of Tractography in Deep Brain Stimulation: Basic Principles and Current Applications,” Brain Sciences, vol. 8, no. 2, pp. 23, 2018. View at Publisher · View at Google Scholar
  • Robert Karpiński, Łukasz Jaworski, Józef Jonak, and Przemysław Krakowski, “The influence of the nucleus pulposus on the stress distribution in the natural and prosthetic intervertebral disc,” MATEC Web of Conferences, vol. 252, pp. 07006, 2019. View at Publisher · View at Google Scholar
  • Robert Karpiński, Łukasz Jaworski, Józef Jonak, and Przemysław Krakowski, “Stress distribution in the knee joint in relation to tibiofemoral angle using the finite element method,” MATEC Web of Conferences, vol. 252, pp. 07007, 2019. View at Publisher · View at Google Scholar