Table of Contents Author Guidelines Submit a Manuscript
Journal of Healthcare Engineering
Volume 2017, Article ID 1439643, 8 pages
https://doi.org/10.1155/2017/1439643
Research Article

New Directions in 3D Medical Modeling: 3D-Printing Anatomy and Functions in Neurosurgical Planning

1Institute of Biomedical and Neural Engineering/Medical Technology Center, Reykjavik University and Landspitali University Hospital, Menntavegi 1, 101 Reykjavik, Iceland
2Department of Neurosurgery, Landspitali University Hospital, Áland, 108 Reykjavik, Iceland

Correspondence should be addressed to Paolo Gargiulo; si.ilatipsdnal@ragoloap

Received 2 March 2017; Accepted 13 April 2017; Published 8 June 2017

Academic Editor: Pan Lin

Copyright © 2017 Paolo Gargiulo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Paolo Gargiulo, Íris Árnadóttir, Magnús Gíslason, Kyle Edmunds, and Ingvar Ólafsson, “New Directions in 3D Medical Modeling: 3D-Printing Anatomy and Functions in Neurosurgical Planning,” Journal of Healthcare Engineering, vol. 2017, Article ID 1439643, 8 pages, 2017. https://doi.org/10.1155/2017/1439643.