Research Article
Application of 3D Printing Technology for Design and Manufacturing of Customized Components for a Mechanical Stretching Bioreactor
Table 3
Printing time, printing material volume, and support material volume for each 3D-printed component.
| Component | Part | Printing time (h:min) | Printing material volume (cm3) | Support material volume (cm3) |
| Motor housing | Container | 11:19 | 177.8 | 2.1 | Lid | 2:29 | 83.5 | 7.8 |
| Culture chamber housing | ā | 9:00 | 133.9 | 27.6 |
| Sample holder | Moving rod | 1:43 | 1.6 | 2.4 | Grip base | 1:50 | 7.5 | 2.8 | Planar guide | 0:23 | 1.8 | 0.6 |
|
|