Research Article
Mechanical Characterization of Thermoplastic Aligner Materials: Recommendations for Test Parameter Standardization
Figure 1
Different forms used for thermoforming the thermoplastic foils: (a) stone model base plate (L × W × H = 74 mm × 66 mm × 12 mm), (b) stone round disc (H = 9 mm, r = 35 mm), (c) gable roof shaped specimen (rise = 17 mm, span = 24 mm), and (d) stainless steel model holding plate.
(a) |
(b) |
(c) |
(d) |