Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2010, Article ID 712407, 8 pages
http://dx.doi.org/10.1155/2010/712407
Research Article

Characterization of Mechanically Alloyed Nanocrystalline Fe(Al): Crystallite Size and Dislocation Density

1Laboratoire de Chimie Inorganique, Faculté des Sciences de Sfax, Université de Sfax, B.P. 1171, Sfax 3018, Tunisia
2Departamento de Física, Universitat de Girona, Campus Montilivi, 17071 Girona, Spain

Received 24 March 2010; Revised 19 July 2010; Accepted 15 November 2010

Academic Editor: Edward Andrew Payzant

Copyright © 2010 M. Mhadhbi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [25 citations]

The following is the list of published articles that have cited the current article.

  • M. Azabou, H. Ibn Gharsallah, L. Escoda, J.J. Suñol, A.W. Kolsi, and M. Khitouni, “Mechanochemical reactions in nanocrystalline Cu–Fe system induced by mechanical alloying in air atmosphere,” Powder Technology, vol. 224, pp. 338–344, 2012. View at Publisher · View at Google Scholar
  • Jiten Ghosh, and Sujata Mazumder, “Structural phase transitions during high-energy ball milling of BaTiO3,” Phase Transitions, vol. 85, no. 8, pp. 694–707, 2012. View at Publisher · View at Google Scholar
  • M. Krifa, M. Mhadhbi, L. Escoda, M. Gueell, J. J. Sunol, N. Llorca-Isern, C. Artieda-Guzman, and M. Khitouni, “Nanocrystalline (Fe60Al40)(80)Cu-20 alloy prepared by mechanical alloying,” Journal Of Alloys And Compounds, vol. 554, pp. 51–58, 2013. View at Publisher · View at Google Scholar
  • M. Mhadhbi, C. Artieda-Guzman, M. Khitouni, M. Krifa, L. Escoda, J. J. Sunol, J. Saurina, and N. Llorca-Isern, “Phase transformations during mechanical alloying of Fe-30% Al-20% Cu,” Powder Technology, vol. 246, pp. 117–124, 2013. View at Publisher · View at Google Scholar
  • Baris Avar, Musa Gogebakan, Sadan Ozcan, and Suleyman Kerli, “Structural, mechanical and magnetic properties of Fe-40-at.% Al powders during mechanical alloying,” Journal of The Korean Physical Society, vol. 65, no. 5, pp. 664–670, 2014. View at Publisher · View at Google Scholar
  • Bahman Nasiri-Tabrizi, Erfan Zalnezhad, A.M.S. Hamouda, W.J. Basirun, Belinda Pingguan-Murphy, Abbas Fahami, M. Sarraf, and A.R. Rafieerad, “Gradual mechanochemical reaction to produce carbonate doped fluorapatite-titania composite nanopowder,” Ceramics International, 2014. View at Publisher · View at Google Scholar
  • M. Slimi, M. Azabou, L. Escoda, J.J. Suñol, and M. Khitouni, “Structural and microstructural properties of nanocrystalline Cu-Fe-Ni powders produced by mechanical alloying,” Powder Technology, 2014. View at Publisher · View at Google Scholar
  • M. Yousefi, S. Sharafi, and A. Mehrolhosseiny, “Correlation between structural parameters and magnetic properties of ball milled nano-crystalline Fe-Co-Si powders,” Advanced Powder Technology, vol. 25, no. 2, pp. 752–760, 2014. View at Publisher · View at Google Scholar
  • M. Dittrich, and G. Schumacher, “Evolution of crystallite size, lattice parameter and internal strain in Al precipitates during high energy ball milling of partly amorphous Al87Ni8La5 alloy,” Materials Science and Engineering: A, 2014. View at Publisher · View at Google Scholar
  • M.B. Uday, M.N. Ahmad-Fauzi, Alias Mohd Noor, and Srithar Rajoo, “An insight into microstructural evolution during plastic deformation in AA6061 alloy after friction welding with Alumina-YSZ composite,” Mechanics of Materials, 2015. View at Publisher · View at Google Scholar
  • M. Najim, P. Smitha, V. Agarwala, and D. Singh, “Design of light weight multi-layered coating of zinc oxide-iron-graphite nano-composites for ultra-wide Bandwidth microwave absorption,” Journal Of Materials Science-Materials In Electronics, vol. 26, no. 10, pp. 7367–7377, 2015. View at Publisher · View at Google Scholar
  • M. Slimi, J. Saurina, J.J. Suñol, L. Escoda, M. Farid, J.M. Greneche, and M. Khitouni, “Mössbauer and X-ray studies of mechanically alloyed Fe60Ni30Cr10 prepared by high energy ball milling,” Advanced Powder Technology, 2016. View at Publisher · View at Google Scholar
  • D. K. Tung, D. H. Manh, L. T. H. Phong, P. H. Nam, D. N. H. Nam, N. T. N. Anh, H. T. T. Nong, M. H. Phan, and N. X. Phuc, “Iron Nanoparticles Fabricated by High-Energy Ball Milling for Magnetic Hyperthermia,” Journal Of Electronic Materials, vol. 45, no. 5, pp. 2644–2650, 2016. View at Publisher · View at Google Scholar
  • Jiajie Li, and Michael Hitch, “Carbon dioxide adsorption isotherm study on mine waste for integrated CO2 capture and sequestration processes,” Powder Technology, vol. 291, pp. 408–413, 2016. View at Publisher · View at Google Scholar
  • Mohd Najim, Smitha Puthucheri, Vijaya Agarwala, and Dharmendra Singh, “ANN-Based Two-Layer Absorber Design Using Fe–Al Hybrid Nano-Composites for Broad Bandwidth Microwave Absorption,” IEEE Transactions on Magnetics, vol. 52, no. 12, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • Opeyemi A. Oyewo, Maurice S. Onyango, and Christian Wolkersdorfer, “Application of banana peels nanosorbent for the removal of radioactive minerals from real mine water,” Journal of Environmental Radioactivity, vol. 164, pp. 369–376, 2016. View at Publisher · View at Google Scholar
  • Raghavendra, Arup Dasgupta, Jayasankar, Saroja, Ramaseshan, Pragna Bhaskar, Athreya, Padmalochan Panda, and Subramanya Sarma, “Synthesis and characterization of Fe-15wt.% ZrO2 nanocomposite powders by mechanical milling,” Powder Technology, vol. 287, pp. 190–200, 2016. View at Publisher · View at Google Scholar
  • O. A. Oyewo, M. S. Onyango, and C. Wolkersdorfer, “Lanthanides removal from mine water using banana peels nanosorbent,” International Journal of Environmental Science and Technology, 2017. View at Publisher · View at Google Scholar
  • M. Hemmous, A. Guittoum, M. Kezrane, N. Boukherroub, D. Martínez-Blanco, P. Gorria, J.A. Blanco, N. Souami, and N. Fennineche, “Effect of Si addition on the structural, microstructural and magnetic properties of (Fe 70 Al 30 ) 100-x Si x nanostructured powders elaborated by mechanical alloying,” Journal of Magnetism and Magnetic Materials, 2017. View at Publisher · View at Google Scholar
  • Kato, Jang, Moon, Hong, Joo, Kim, and Kim, “Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering,” Journal of Alloys and Compounds, vol. 698, pp. 591–604, 2017. View at Publisher · View at Google Scholar
  • G. Turgut, G. Aksoy, D. İskenderoğlu, U. Turgut, and S. Duman, “The effect of Eu-loading on the some physical features of CdO,” Ceramics International, 2017. View at Publisher · View at Google Scholar
  • P. Subalakshmi, M. Ganesan, and A. Sivashanmugam, “Synthesis of 3D architecture CuO micro balls and nano hexagons and its electrochemical capacitive behavior,” Materials & Design, 2017. View at Publisher · View at Google Scholar
  • M. Chauhan, V. Bundy, P. Modi, and K. Morsi, “Electrically activated reactive synthesis (EARS) and electro-annealing of 3Ni–Al powder compacts,” Journal of Materials Science, 2018. View at Publisher · View at Google Scholar
  • Clara Hofmeister, Le Zhou, Frank Kellogg, Anit Giri, Kyu Cho, and Yongho Sohn, “Effects of Degassing on the Microstructure, Chemistry, and Estimated Mechanical Properties of a Cryomilled Al-Mg Alloy,” Metallurgical and Materials Transactions A, 2018. View at Publisher · View at Google Scholar
  • Vanessa Bundy, Mehul Chauhan, Cyrus Fitch, Prathmesh Modi, and K. Morsi, “Effect of Carbon Nanotube (CNT) Length on the Mechanical Milling of Ni-CNT Powders and Ni-CNT/Al Reactive Synthesis,” Metallurgical and Materials Transactions A, 2018. View at Publisher · View at Google Scholar