Fabrication and Characterization of Hydrophilic TiO<sub>2</sub> Thin Films on Unheated Substrates Prepared by Pulsed DC Reactive Magnetron Sputtering

<table>Water contact angle variation following the UV illumination time for the <svg height="14.7125" id="M16" style="vertical-align:-3.13504pt" version="1.1" viewbox="0 0 31.25 14.7125" width="31.25" xmlns="http://www.w3.org/2000/svg">
<g transform="matrix(1.25,0,0,-1.25,0,14.7125)">
<g transform="translate(72,-60.23)">
<text transform="matrix(1,0,0,-1,-71.95,63.41)">
<tspan style="font-size: 12.50px; " x="0" y="0">T</tspan>
<tspan style="font-size: 12.50px; " x="7.5268059" y="0">i</tspan>
<tspan style="font-size: 12.50px; " x="11.00264" y="0">O</tspan>
</text>
<text transform="matrix(1,0,0,-1,-51.92,60.28)">
<tspan style="font-size: 8.75px; " x="0" y="0">2</tspan>
</text>
</g>
</g>
</svg> thin films deposited on glass slides at: (a) two different operating pressures and (b) different film thicknesses.</table>

Journal of Nanomaterials

fig6

Figure 6

Figure 6: Fabrication and Characterization of Hydrophilic TiO<sub>2</sub> Thin Films on Unheated Substrates Prepared by Pulsed DC Reactive Magnetron Sputtering 

Journal of Nanomaterials

Fabrication and Characterization of Hydrophilic TiO2 Thin Films on Unheated Substrates Prepared by Pulsed DC Reactive Magnetron Sputtering

Figure 6

Fabrication and Characterization of Hydrophilic TiO₂ Thin Films on Unheated Substrates Prepared by Pulsed DC Reactive Magnetron Sputtering