Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2011, Article ID 307589, 8 pages
http://dx.doi.org/10.1155/2011/307589
Research Article

Preparation, Characterization, and Modeling of Carbon Nanofiber/Epoxy Nanocomposites

1Department of Materials Science, Fudan University, Shanghai 200433, China
2Department of Aerospace Engineering, Texas A&M University, College Station, TX 77843, USA
3Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843, USA

Received 6 July 2010; Accepted 19 October 2010

Academic Editor: Sulin Zhang

Copyright © 2011 Lan-Hui Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [27 citations]

The following is the list of published articles that have cited the current article.

  • Hashim Hassan, and Tyler N. Tallman, “Predicting failure from conductivity changes in piezoresistive nanocomposites,” Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2018, pp. 5, . View at Publisher · View at Google Scholar
  • Ehsan Bafekrpour, George P. Simon, Minoo Naebe, Jana Habsuda, Chunhui Yang, and Bronwyn Fox, “Preparation and properties of composition-controlled carbon nanofiber/phenolic nanocomposites,” Composites Part B: Engineering, vol. 52, pp. 120–126, 2013. View at Publisher · View at Google Scholar
  • M.M. Shokrieh, A. Daneshvar, S. Akbari, and M. Chitsazzadeh, “The use of carbon nanofibers for thermal residual stress reduction in carbon fiber/epoxy laminated composites,” Carbon, vol. 59, pp. 255–263, 2013. View at Publisher · View at Google Scholar
  • Wanshuang Liu, Junhua Kong, Weilong Eric Toh, Rui Zhou, Guoqiang Ding, Shu Huang, Yuliang Dong, and Xuehong Lu, “Toughening of epoxies by covalently anchoring triazole-functionalized stacked-cup carbon nanofibers,” Composites Science and Technology, vol. 85, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Ling Liu, Yexin Zhou, and Shengqiang Pan, “Experimental and analysis of the mechanical behaviors of multi-walled nanotubes/polyurethane nanoweb-reinforced epoxy composites,” Journal Of Reinforced Plastics And Composites, vol. 32, no. 11, pp. 823–834, 2013. View at Publisher · View at Google Scholar
  • Kamil Janeczek, Grazyna Koziol, Malgorzata Jakubowska, Aneta Arazna, Anna Mlozniak, and Konrad Futera, “Assessment of electromechanical properties of screen printed polymer nanopastes,” Materials Science And Engineering B-Advanced Functional Solid-State Materia Ls, vol. 178, no. 8, pp. 511–519, 2013. View at Publisher · View at Google Scholar
  • Ehsan Bafekrpour, Chunhui Yang, Maurizio Natali, and Bronwyn Fox, “Functionally graded carbon nanofiber/phenolic nanocomposites and their mechanical properties,” Composites Part A-Applied Science and Manufacturing, vol. 54, pp. 124–134, 2013. View at Publisher · View at Google Scholar
  • Mahmood M. Shokrieh, Reza Mosalmani, and Ali Reza Shamaei, “A combined micromechanical-numerical model to simulate shear behavior of carbon nanofiber/epoxy nanocomposites,” Materials & Design, 2014. View at Publisher · View at Google Scholar
  • Mahmood M. Shokrieh, Reza Mosalmani, and Majid Jamal Omidi, “Strain rate dependent micromechanical modeling of reinforced polymers with carbon nanotubes,” Journal of Composite Materials, vol. 48, no. 27, pp. 3381–3393, 2014. View at Publisher · View at Google Scholar
  • Ronald L. Poveda, Sriniket Achar, and Nikhil Gupta, “Viscoelastic properties of carbon nanofiber reinforced multiscale syntactic foam,” Composites Part B: Engineering, vol. 58, pp. 208–216, 2014. View at Publisher · View at Google Scholar
  • Ronald L. Poveda, and Nikhil Guptapp. 1–98, 2015. View at Publisher · View at Google Scholar
  • Pengfei Wang, Xin Zhang, Guohui Lim, Haosiang Neo, Andrew Alexander Malcolm, Yong Xiang, Guoxing Lu, and Jinglei Yang, “Improvement of impact-resistant property of glass fiber-reinforced composites by carbon nanotube-modified epoxy and pre-stretched fiber fabrics,” Journal Of Materials Science, vol. 50, no. 18, pp. 5978–5992, 2015. View at Publisher · View at Google Scholar
  • Afroza Khanam, Bablu Mordina, and R. K. Tiwari, “Statistical evaluation of the effect of carbon nanofibre content on tribological properties of epoxy nanocomposites,” Journal Of Composite Materials, vol. 49, no. 20, pp. 2497–2507, 2015. View at Publisher · View at Google Scholar
  • A.R. Ghasemi, M.M. Mohammadi, and M. Mohandes, “The Role of Carbon Nanofibers on Thermo Mechanical Properties of Polymer Matrix Composites and Their Effect on Reduction of Residual Stresses,” Composites Part B: Engineering, 2015. View at Publisher · View at Google Scholar
  • Mojtaba Ahmadi, Mahmood Masoomi, and Somayeh Safi, “Mechanical property characterization of carbon nanofiber/epoxy nanocomposites reinforced by GMA-grafted UHMWPE fibers,” Composites Part B: Engineering, vol. 83, pp. 43–49, 2015. View at Publisher · View at Google Scholar
  • Hassene Ben Atitallah, Zoubeida Ounaies, and Anastasia Muliana, “A parametric study on flexible electro-active composites: Importance of geometry and matrix properties,” Journal of Intelligent Material Systems and Structures, vol. 26, no. 17, pp. 2386–2394, 2015. View at Publisher · View at Google Scholar
  • Eletskii, Potapkin, Kenny, and Knizhnik, “Electrical characteristics of carbon nanotube-doped composites,” Physics-Uspekhi, vol. 58, no. 3, pp. 209–251, 2015. View at Publisher · View at Google Scholar
  • Reza Mosalmani, Mahmood M. Shokrieh, and Ali Reza Shamaei Kashani, “A dynamic constitutive-micromechanical model to predict the strain rate-dependent mechanical behavior of carbon nanofiber/epoxy nanocomposites,” Iranian Polymer Journal (English Edition), vol. 25, no. 6, pp. 487–501, 2016. View at Publisher · View at Google Scholar
  • Subhadip Mondal, Lalatendu Nayak, Mostafizur Rahaman, Ali Aldalbahi, Tapan K. Chaki, Dipak Khastgir, and Narayan Ch Das, “An effective strategy to enhance mechanical, electrical, and electromagnetic shielding effectiveness of chlorinated polyethylene-carbon nanofiber nanocomposites,” Composites Part B: Engineering, 2016. View at Publisher · View at Google Scholar
  • S Banerjee, K A Cook-Chennault, W Du, U Sundar, H Halim, and A Tang, “Piezoelectric and dielectric characterization of corona and contact poled PZT-epoxy-MWCNT bulk composites,” Smart Materials and Structures, vol. 25, no. 11, pp. 115018, 2016. View at Publisher · View at Google Scholar
  • Soma Banerjee, Raghunandan Sharma, and Kamal K. Karpp. 251–280, 2016. View at Publisher · View at Google Scholar
  • M. Tirumali, Balasubramanian Kandasubramanian, A. Kumaraswamy, Nithin Kundachira Subramani, and Suresha B, “Fabrication, Physicochemical Characterizations and Electrical Conductivity Studies of Modified Carbon Nanofiber-Reinforced Epoxy Composites: Effect of 1-Butyl-3-Methylimidazolium Tetrafluoroborate Ionic Liquid,” Polymer-Plastics Technology and Engineering, vol. 57, no. 3, pp. 218–228, 2017. View at Publisher · View at Google Scholar
  • Subhra Gantayat, Dibyaranjan Rout, and Sarat K. Swain, “Carbon Nanomaterial–Reinforced Epoxy Composites: A Review,” Polymer-Plastics Technology and Engineering, vol. 57, no. 1, pp. 1–16, 2017. View at Publisher · View at Google Scholar
  • Wanshuang Liu, Yiru Wang, Pengfei Wang, Yan Li, Qiuran Jiang, Xiaoyu Hu, Yi Wei, Yiping Qiu, Seyed Ismail Seyed Shahabadi, and Xuehong Lu, “A biomimetic approach to improve the dispersibility, interfacial interactions and toughening effects of carbon nanofibers in epoxy composites,” Composites Part B: Engineering, 2017. View at Publisher · View at Google Scholar
  • Jabaraj, and Parimala, “Predicting the stiffness of biaxial braided fiber composites by incorporation of carbon nano fiber,” Iranian Journal of Materials Science and Engineering, vol. 14, no. 2, pp. 53–59, 2017. View at Publisher · View at Google Scholar
  • Fateh Singh Gill, Sarita Chandra, Varij Panwar, Divya Uniyal, G.S. Kalra, Vinay Kumar, and Preeti Garg, “Conduction pathways in CNF/PTFE composite: Air oxidized CNFs coated with the incomplete layer of PTFE,” Diamond and Related Materials, 2018. View at Publisher · View at Google Scholar
  • Yichao Li, Jianying Ji, Yu Wang, Renfu Li, and Wei-Hong Zhong, “Soy protein-treated nanofillers creating adaptive interfaces in nanocomposites with effectively improved conductivity,” Journal of Materials Science, 2018. View at Publisher · View at Google Scholar