Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 435873, 17 pages
http://dx.doi.org/10.1155/2012/435873
Review Article

A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications

School of Urban Development and Environmental Engineering, Shanghai Second Polytechnic University, Shanghai 201209, China

Received 21 April 2011; Accepted 11 July 2011

Academic Editor: Li-Hong Liu

Copyright © 2012 Wei Yu and Huaqing Xie. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [414 citations]

The following is the list of published articles that have cited the current article.

  • E. M. Abo-Zahhad, A. H. El-Shazly, and M. F. El-Kady, “Experimental study of pressure drops across microtube using graphene and magnetic graphene nanofluid,” vol. 1814, pp. 020015, . View at Publisher · View at Google Scholar
  • Mudang Taro, Dayal Shill, Anu Kumar Das, and Saibal Chatterjee, “Experimental investigation of transformer oil based nanofluids for applications in distribution transformers,” 2017 3rd International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), pp. 367–370, . View at Publisher · View at Google Scholar
  • Pankaj Kumar, Debashis Dey, and Sikata Samantaray, “A recent review on thermo-physical properties of nanofluid,” 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), pp. 3555–3560, . View at Publisher · View at Google Scholar
  • Eliel W. Marcelino, Roger R. Riehl, and Silva de O. Debora, “A review on thermal performance of CuO-water nanofluids applied to heat pipes and their characteristics,” 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pp. 12–22, . View at Publisher · View at Google Scholar
  • Murat Parlak, Ozge Osturk, Umit N. Temel, and Kerim Yapici, “Heat transfer performance of water based nanofluids containing various types of metal oxide nanoparticles in an air-cooled microchannel heat exchanger,” 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), pp. 1–5, . View at Publisher · View at Google Scholar
  • F. S. Komori, and M. N. P. Carreno, “Simulating nanofluids using the Lattice Boltzmann Method,” 28th Symposium on Microelectronics Technology and Devices (SBMicro 2013), pp. 1–4, . View at Publisher · View at Google Scholar
  • Ke Xu, Peixi Zhu, Colon Tatiana, Chun Huh, and Matthew Balhoff, “A Microfluidic Investigation of the Synergistic Effect of Nanoparticles and Surfactants in Macro-Emulsion Based EOR,” SPE Improved Oil Recovery Conference, . View at Publisher · View at Google Scholar
  • You Wei, and Tayfun Babadagli, “Selection of Proper Chemicals to Improve the Performance of Steam Based Thermal Applications in Sands and Carbonates,” SPE Latin America and Caribbean Heavy and Extra Heavy Oil Conference, . View at Publisher · View at Google Scholar
  • Fritjof Bruns, and Tayfun Babadagli, “Recovery Improvement of Gravity Driven Steam Applications Using New Generation Chemical Additives,” SPE Western Regional Meeting, . View at Publisher · View at Google Scholar
  • Todd Otanicar, and Ross Smith, “Controllable Nanoparticle Radiative Properties for High-Turndown Ratio Heat Rejection,” 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, . View at Publisher · View at Google Scholar
  • Nahai Cao, M. Almojtaba Mohammed, and Tayfun Babadagli, “Wettability Alteration of Heavy-Oil/Bitumen Containing Carbonates Using Solvents, high pH Solutions and Nano/Ionic Liquids,” OTC Brasil, . View at Publisher · View at Google Scholar
  • Lezorgia. N. Nwidee, Sarmad Al-Anssari, Ahmed Barifcani, Mohammad Sarmadivaleh, and Stefan Iglauer, “Nanofluids for Enhanced Oil Recovery Processes: Wettability Alteration Using Zirconium Oxide,” Offshore Technology Conference Asia, . View at Publisher · View at Google Scholar
  • Shazia Tanvir, Francois Oudet, Sylviane Pulvin, and William A. Anderson, “Coenzyme based synthesis of silver nanocrystals,” Enzyme and Microbial Technology, vol. 51, no. 4, pp. 231–236, 2012. View at Publisher · View at Google Scholar
  • Gang Chen, Xing-ming Shi, Ting-ting Gao, Wei Li, Yan Zhao, Feng-qiang Zhang, Jin Wu, Xianlan Cui, Kai Zhao, and Yun-Feng Wang, “Preparation and Efficacy of a Live Newcastle Disease Virus Vaccine Encapsulated in Chitosan Nanoparticles,” PLoS ONE, vol. 7, no. 12, 2012. View at Publisher · View at Google Scholar
  • N. S. Souza, A. D. Rodrigues, C. A. Cardoso, H. Pardo, R. Faccio, A. W. Mombru, J. C. Galzerani, O. F. de Lima, S. Sergeenkov, and F. M. Araujo-Moreira, “Physical properties of nanofluid suspension of ferromagnetic graphite with high Zeta potential,” Physics Letters A, vol. 376, no. 4, pp. 544–546, 2012. View at Publisher · View at Google Scholar
  • Sanjeeva Witharana, and Jinendrika Anushi Weliwita, “Suspended nanoparticles as a way to improve thermal energy transfer efficiency,” ICIAFS 2012 - Proceedings: 2012 IEEE 6th International Conference on Information and Automation for Sustainability, pp. 308–311, 2012. View at Publisher · View at Google Scholar
  • Kristan L S Worthington, Andrea Adamcakova-Dodd, Amaraporn Wongrakpanich, Imali A Mudunkotuwa, Kranti A Mapuskar, Vijaya B Joshi, C Allan Guymon, Douglas R Spitz, Vicki H Grassian, Peter S Thorne, and Aliasger K Salem, “ Chitosan coating of copper nanoparticles reduces in vitro toxicity and increases inflammation in the lung ,” Nanotechnology, vol. 24, no. 39, pp. 395101, 2013. View at Publisher · View at Google Scholar
  • Kuppusamy Swaminathan Suganthi, Natarajan Anusha, and Kalpoondi Sekar Rajan, “Low viscous ZnO–propylene glycol nanofluid: a potential coolant candidate,” Journal of Nanoparticle Research, vol. 15, no. 10, 2013. View at Publisher · View at Google Scholar
  • Sub Lee Song, Ju Hyung Lee, and Soon Heung Chang, “CHF enhancement of SiC nanofluid in pool boiling experiment,” Experimental Thermal and Fluid Science, 2013. View at Publisher · View at Google Scholar
  • G.C. Bourantas, E.D. Skouras, V.C. Loukopoulos, and V.N. Burganos, “Heat transfer and natural convection of nanofluids in porous media,” European Journal of Mechanics - B/Fluids, 2013. View at Publisher · View at Google Scholar
  • Leony Tham, Roslinda Nazar, and Ioan Pop, “Mixed convection flow over a solid sphere embedded in a porous medium filled by a nanofluid containing gyrotactic microorganisms,” International Journal of Heat and Mass Transfer, vol. 62, pp. 647–660, 2013. View at Publisher · View at Google Scholar
  • Hussain H. Al-Kayiem, Saw Chun Lin, and Afolabi Lukmon, “Review on nanomaterials for thermal energy storage technologies,” Nanoscience and Nanotechnology - Asia, vol. 3, no. 1, pp. 60–71, 2013. View at Publisher · View at Google Scholar
  • Sanjeeva Witharana, Ibrahim Palabiyik, Zenfira Musina, and Yulong Ding, “Stability of glycol nanofluids — The theory and experiment,” Powder Technology, vol. 239, pp. 72–77, 2013. View at Publisher · View at Google Scholar
  • Ali J. Chamkha, and Muneer A. Ismael, “Conjugate heat transfer in a porous cavity filled with nanofluids and heated by a triangular thick wall,” International Journal of Thermal Sciences, vol. 67, pp. 135–151, 2013. View at Publisher · View at Google Scholar
  • A. Zarghami, S. Ubertini, and S. Succi, “Finite-volume lattice Boltzmann modeling of thermal transport in nanofluids,” Computers & Fluids, vol. 77, pp. 56–65, 2013. View at Publisher · View at Google Scholar
  • Pouya Hajiani, and Faïçal Larachi, “Giant effective liquid-self diffusion in stagnant liquids by magnetic nanomixing,” Chemical Engineering and Processing: Process Intensification, 2013. View at Publisher · View at Google Scholar
  • Swaminathan Ponmani, Jay Karen Maria William, Robello Samuel, R. Nagarajan, and Jitendra S. Sangwai, “Formation and Characterization of Thermal and Electrical Properties of CuO and ZnO Nanofluids in Xanthan Gum,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2013. View at Publisher · View at Google Scholar
  • Carlos I. Rivera-Solorio, Luis A. Payán-Rodríguez, Alejandro J. García-Cuéllar, Ramón-Raygoza, Natalia L. Cadena-de-la-Peña, and David Medina-Carreón, “Formulation techniques for nanofluids,” Recent Patents on Nanotechnology, vol. 7, no. 3, pp. 208–215, 2013. View at Publisher · View at Google Scholar
  • L. Tham, R. Nazar, and I. Pop, “Steady Mixed Convection Flow on a Horizontal Circular Cylinder Embedded in a Porous Medium Filled by a Nanofluid Containing Gyrotactic Micro-Organisms,” Journal of Heat Transfer-Transactions of The Asme, vol. 135, no. 10, 2013. View at Publisher · View at Google Scholar
  • Todd Otanicar, Jordan Hoyt, Maryam Fahar, Xuchuan Jiang, and Robert A. Taylor, “Experimental and numerical study on the optical properties and agglomeration of nanoparticle suspensions,” Journal of Nanoparticle Research, vol. 15, no. 11, 2013. View at Publisher · View at Google Scholar
  • C. Zhao, Y.K. Chen, Y. Jiao, A. Loya, and G.G. Ren, “The preparation and tribological properties of surface modified zinc borate ultrafine powder as a lubricant additive in liquid paraffin,” Tribology International, 2013. View at Publisher · View at Google Scholar
  • Md Jashim Uddin, N H Md Yusoff, O Anwar Bég, and Ahamd Izani Ismail, “Lie group analysis and numerical solutions for non-Newtonian nanofluid flow in a porous medium with internal heat generation,” Physica Scripta, vol. 87, no. 2, pp. 025401, 2013. View at Publisher · View at Google Scholar
  • Chuanli Zhao, Chen, and Ren, “A study of tribological properties of water-based ceria nanofluids,” Tribology Transactions, vol. 56, no. 2, pp. 275–283, 2013. View at Publisher · View at Google Scholar
  • Leony Tham, Roslinda Nazar, Ioan Pop, Leony Tham, Roslinda Nazar, and Ioan Pop, “Numerical solutions of mixed convection flow on a solid sphere embedded in a porous medium filled by a nanofluid containing gyrotactic microorganisms,” AIP Conference Proceedings, vol. 1522, pp. 604–613, 2013. View at Publisher · View at Google Scholar
  • Somchai Wongwises, Ali Kianifar, Clement Kleinstreuer, Ahmet Z. Sahin, Ioan Pop, Omid Mahian, and Moh'd A. Al-Nimr, “A review of entropy generation in nanofluid flow,” International Journal Of Heat And Mass Transfer, vol. 65, pp. 514–532, 2013. View at Publisher · View at Google Scholar
  • T. Y. Chen, H. P. Cho, C. S. Jwo, and L. Y. Jeng, “Performance Analysis of Al2O3/Water Nanofluid with Cationic Chitosan Dispersant,” Advances in Materials Science and Engineering, 2013. View at Publisher · View at Google Scholar
  • S. Delfani, A. M. Rashidi, M. Raisee, M. Karami, and M. A. Akhavan Bahabadi, “Sunlight absorbing potential of carbon nanoball water and ethylene glycol-based nanofluids,” Optics And Spectroscopy, vol. 115, no. 3, pp. 400–405, 2013. View at Publisher · View at Google Scholar
  • Rehab Nabil Shamma, and Ibrahim Elsayed, “Transfersomal lyophilized gel of buspirone HCl: formulation, evaluation and statistical optimization,” Journal Of Liposome Research, vol. 23, no. 3, pp. 244–254, 2013. View at Publisher · View at Google Scholar
  • Ki-Young Song, and Wen-Jun Zhang, “Application of nanofluids to microsphere generation using MEMS technology,” Recent Patents on Nanotechnology, vol. 7, no. 2, pp. 133–152, 2013. View at Publisher · View at Google Scholar
  • Amit Sobti, and Wanchoo, “Thermal conductivity of nanofluids,” Materials Science Forum, vol. 757, pp. 111–137, 2013. View at Publisher · View at Google Scholar
  • Y. Z. Lv, Y. Zhou, C. R. Li, Q. Wang, and B. Qi, “Recent Progress in Nanofluids Based on Transformer Oil: Preparation and Electrical Insulation Properties,” Ieee Electrical Insulation Magazine, vol. 30, no. 5, pp. 23–32, 2014. View at Publisher · View at Google Scholar
  • Aswathy Joseph, and Suresh Mathew, “Ferrofluids: Synthetic Strategies, Stabilization, Physicochemical Features, Characterization, and Applications,” ChemPlusChem, 2014. View at Publisher · View at Google Scholar
  • Galal M. Moatimid, Elham M. M. Alali, and Hoda S. M. Ali, “Nonlinear instability of an Oldroyd elastico–viscous magnetic nanofluid saturated in a porous medium,” Physics of Plasmas, vol. 21, no. 9, pp. 092113, 2014. View at Publisher · View at Google Scholar
  • Jagdeep M. Kshirsagar, and Ramakant Shrivastava, “Review of the influence of nanoparticles on thermal conductivity, nucleate pool boiling and critical heat flux,” Heat and Mass Transfer, vol. 51, no. 3, pp. 381–398, 2014. View at Publisher · View at Google Scholar
  • Dolinsky, Grabov, Moskalenko, Grabova, and Logvinenko, “Cooling characteristics of Meso- and nanofluids prepared by the DPIE method,” Materials Performance and Characterization, vol. 3, no. 4, pp. 337–351, 2014. View at Publisher · View at Google Scholar
  • Y G Zheng, Y T Zhao, H F Ye, and H W Zhang, “Size-dependent elastic moduli and vibrational properties of fivefold twinned copper nanowires,” Nanotechnology, vol. 25, no. 31, pp. 315701, 2014. View at Publisher · View at Google Scholar
  • Wereley, Cheng, Ma, Hu, Wu, Xiao, Chen, and Zhang, “Carbon nanotubes suspended in ethylene glycol yield nanofluids with enhanced heat transfer properties,” WIT Transactions on Engineering Sciences, vol. 83, pp. 73–80, 2014. View at Publisher · View at Google Scholar
  • W. Rashmi, A. F. Ismail, M. Khalid, A. Anuar, and T. Yusaf, “Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids,” Journal of Materials Science, vol. 49, no. 13, pp. 4544–4551, 2014. View at Publisher · View at Google Scholar
  • Nathan Hordy, Delphine Rabilloud, Jean-Luc Meunier, and Sylvain Coulombe, “High temperature and long-term stability of carbon nanotube nanofluids for direct absorption solar thermal collectors,” Solar Energy, vol. 105, pp. 82–90, 2014. View at Publisher · View at Google Scholar
  • Ahmed Hassen Elshafeey, Ibrahim Elsayed, and Aly Ahmed Abdelbary, “Nanosizing of a poorly soluble drug: Technique optimization, factorial analysis, and pharmacokinetic study in healthy human volunteers,” International Journal of Nanomedicine, vol. 9, no. 1, pp. 2943–2953, 2014. View at Publisher · View at Google Scholar
  • S. Manikandan, A. Shylaja, and K. S. Rajan, “Thermo-physical properties of engineered dispersions of nano-sand in propylene glycol,” Colloids and Surfaces A-Physicochemical and Engineering Aspects, vol. 449, pp. 8–18, 2014. View at Publisher · View at Google Scholar
  • P. Hajiani, and F. Larachi, “Magnetic-field assisted mixing of liquids using magnetic nanoparticles,” Chemical Engineering and Processing: Process Intensification, 2014. View at Publisher · View at Google Scholar
  • K.S. Suganthi, and K.S. Rajan, “A formulation strategy for preparation of ZnO–Propylene glycol–water nanofluids with improved transport properties,” International Journal of Heat and Mass Transfer, vol. 71, pp. 653–663, 2014. View at Publisher · View at Google Scholar
  • M. Rolland, and P. Hajiani, “Axial Dispersion in Nanofluid Poiseuille Flows Stirred by Magnetic Nanoagit ators,” Industrial & Engineering Chemistry Research, vol. 53, no. 14, pp. 6204–6210, 2014. View at Publisher · View at Google Scholar
  • Zhenyu Zhang, Dorin Simionesie, and Carl Schaschke, “Graphite and Hybrid Nanomaterials as Lubricant Additives,” Lubricants, vol. 2, no. 2, pp. 44–65, 2014. View at Publisher · View at Google Scholar
  • Gawel Zyla, Joanna Grzywa, Adam Witek, and Marian Cholewa, “Influence of anisotropic pressure on viscosity and electrorheology of diethylene glycol-based MgAl2O4 nanofluids,” Nanoscale Research Letters, vol. 9, 2014. View at Publisher · View at Google Scholar
  • D. Senthilkumar, “Thermo-Physical Behaviour of Cryogenically Treated Silicon Carbide for Nano Fluids,” Materials and Manufacturing Processes, pp. 140303064604004, 2014. View at Publisher · View at Google Scholar
  • Jay Karen Maria William, Swaminathan Ponmani, Robello Samuel, R. Nagarajan, and Jitendra S. Sangwai, “Effect of CuO and ZnO Nanofluids in Xanthan Gum on Thermal, Electrical and High Pressure Rheology of Water-Based Drilling Fluids,” Journal of Petroleum Science and Engineering, 2014. View at Publisher · View at Google Scholar
  • Nor Azwadi Che Sidik, H.A. Mohammed, Omer A. Alawi, and S. Samion, “A review on preparation methods and challenges of nanofluids,” International Communications in Heat and Mass Transfer, 2014. View at Publisher · View at Google Scholar
  • Zoubida Haddad, Chérifa Abid, Hakan F. Oztop, and Amina Mataoui, “A review on how the researchers prepare their nanofluids,” International Journal of Thermal Sciences, vol. 76, pp. 168–189, 2014. View at Publisher · View at Google Scholar
  • Andressa C. Schneid, Fernanda Sperb, Ursula Matte, Edilson V. Benvenutti, Eliana W. De Menezes, Eliane W. Roesch, Nádya P. Da Silveira, and Tania M. H. Costa, “Silver nanoparticle-ionic silsesquioxane: A new system proposed as an antibacterial agent,” Journal of Materials Chemistry B, vol. 2, no. 8, pp. 1079–1086, 2014. View at Publisher · View at Google Scholar
  • M. Karami, M.A. Akhavan Bahabadi, S. Delfani, and A. Ghozatloo, “A new application of carbon nanotubes nanofluid as working fluid of low-temperature direct absorption solar collector,” Solar Energy Materials and Solar Cells, vol. 121, pp. 114–118, 2014. View at Publisher · View at Google Scholar
  • Quan Tan, Gang Yu, Yuan Liao, Bonian Hu, and Xueyuan Zhang, “Preparation of stable aqueous suspensions of antimony-doped tin oxide nanoparticles used for transparent and thermal insulation fluorocarbon coating,” Colloid and Polymer Science, vol. 292, no. 12, pp. 3233–3241, 2014. View at Publisher · View at Google Scholar
  • Suhaib Umer Ilyas, Rajashekhar Pendyala, and Narahari Marneni, “Preparation, Sedimentation, and Agglomeration of Nanofluids,” Chemical Engineering & Technology, vol. 37, no. 12, pp. 2011–2021, 2014. View at Publisher · View at Google Scholar
  • Ilyas, Pendyala, and Marneni, “Dispersion behaviour and agglomeration effects of zinc oxide nanoparticles in ethanol-water mixtures,” Materials Research Innovations, vol. 18, pp. S6–179-S6-183, 2014. View at Publisher · View at Google Scholar
  • Rajib Ghosh Chaudhuri, and Santanu Paria, “The wettability of PTFE and glass surfaces by nanofluids,” Journal of Colloid and Interface Science, vol. 434, pp. 141–151, 2014. View at Publisher · View at Google Scholar
  • Ming Erh Ooi, Mohd Sayuti, and Ahmed A.D. Sarhan, “Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061,” Journal of Cleaner Production, 2014. View at Publisher · View at Google Scholar
  • Ali Celen, Melih Aktas, Alican Çebi, Omid Mahian, Somchai Wongwises, and Ahmet Selim Dalkilic, “A review of nanorefrigerants: Flow characteristics and applications,” International Journal of Refrigeration, vol. 44, pp. 125–140, 2014. View at Publisher · View at Google Scholar
  • Sivasubramanian Manikandan, and Kalpoondi Sekar Rajan, “Rapid synthesis of MgO nanoparticles & their utilization for formulation of a propylene glycol based nanofluid with superior transport properties,” Rsc Advances, vol. 4, no. 93, pp. 51830–51837, 2014. View at Publisher · View at Google Scholar
  • Yuan He, Shiva Vasiraju, and Long Que, “Hybrid nanomaterial-based nanofluids for micropower generation,” RSC Advances, vol. 4, no. 5, pp. 2433, 2014. View at Publisher · View at Google Scholar
  • Piratheepan, and Anderson, “An experimental investigation of turbulent forced convection heat transfer by a multi-walled carbon-nanotube nanofluid,” International Communications in Heat and Mass Transfer, vol. 57, pp. 286–290, 2014. View at Publisher · View at Google Scholar
  • Amrita, Srikant, Sitaramaraju, Mms Prasad, and P Vamsi Krishna, “Preparation and characterization of properties of nanographite-based cutting fluid for machining operations,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 228, no. 3, pp. 243–252, 2014. View at Publisher · View at Google Scholar
  • A.-R. A. Khaled, “Analysis of Heat Transfers inside Counterflow Plate Heat Exchanger Augmented by an Auxiliary Fluid Flow,” The Scientific World Journal, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • H. Saleh, and I. Hashim, “Numerical Analysis of Nanofluids in Differentially Heated Enclosure Undergoing Orthogonal Rotation,” Advances in Mathematical Physics, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • Sergiy Artemenko, “Critical parameters shift in classical fluids under the influence of nanoparticle additives,” EasternEuropean Journal of Enterprise Technologies, vol. 6, no. 5, pp. 29–33, 2014. View at Publisher · View at Google Scholar
  • Vincent D. Romanin, and Sonia Fereres, “A meta-analysis of the specific heat enhancement of nanofluids,” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 6B, 2014. View at Publisher · View at Google Scholar
  • Maryam Shafahi, Kevin Anderson, Ali Borna, Michael Lee, Alex Kim, Syukrirashiduhakim Subandi, and Parham Khansari, “A review on nanofluid heat pipe,” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 8B, 2014. View at Publisher · View at Google Scholar
  • Gayadhthri, Suganthi, Manikandan, and Rajan, “Role of surfactants in colloidal stability and properties of α-Fe2O3 based nanofluids,” Asian Journal of Scientific Research, vol. 7, no. 3, pp. 320–327, 2014. View at Publisher · View at Google Scholar
  • Harde, Shirke, Balasao D. Kusure, and Warkhedkar, “Heat transfer enhancement by using nanofluids in heat pipe - A review,” Applied Mechanics and Materials, vol. 592-594, pp. 932–938, 2014. View at Publisher · View at Google Scholar
  • Dani Gustaman Syarif, “Characteristics of water-ZrO2 nanofluids with different pH utilizing local ZrO2 nanoparticle prepared by precipitation method,” Advanced Materials Research, vol. 896, pp. 163–167, 2014. View at Publisher · View at Google Scholar
  • Ali Kianifar, Omid Mahian, Somchai Wongwises, Ahmet Z. Sahin, and Waqar A. Khan, “Costs due to entropy generation in a vertical annulus using nanofluids and different thermophysical models,” Current Nanoscience, vol. 10, no. 5, pp. 743–752, 2014. View at Publisher · View at Google Scholar
  • Paula I P Soares, Frederik Lochte, Coro Echeverria, Laura C J Pereira, Joana T Coutinho, Isabel M M Ferreira, Carlos M M Novo, and João P M R Borges, “Thermal and magnetic properties of iron oxide colloids: influence of surfactants,” Nanotechnology, vol. 26, no. 42, pp. 425704, 2015. View at Publisher · View at Google Scholar
  • Pryazhnikov, Minakov, and V. Ya. Rudyak, “The influence of the size and material of nanoparticles and the heater size on the critical heat flux density in boiling nanofluids,” Technical Physics Letters, vol. 41, no. 9, pp. 891–893, 2015. View at Publisher · View at Google Scholar
  • Prasad Gurav, Srinu Naik, Bharat A. Bhanvase, Dipak V. Pinjari, Shirish H. Sonawane, and Muthupandian Ashokkumar, “Heat transfer intensification using polyaniline based nanofluids: Preparation and application,” Chemical Engineering and Processing: Process Intensification, vol. 95, pp. 195–201, 2015. View at Publisher · View at Google Scholar
  • S.A. Angayarkanni, and John Philip, “Review on thermal properties of nanofluids: Recent developments,” Advances in Colloid and Interface Science, 2015. View at Publisher · View at Google Scholar
  • Xiande Fang, Run Wang, Weiwei Chen, Helei Zhang, and Chunxiang Ma, “A review of flow boiling heat transfer of nanofluids,” Applied Thermal Engineering, 2015. View at Publisher · View at Google Scholar
  • Youngsang Seo, Tae-Youl Choi, Jeonghong Ha, Dae-Yong Jeong, Seung Yong Lee, and Dongsik Kim, “Enhancement of stability of aqueous suspension of alumina nanoparticles by femtosecond laser irradiation,” Journal of Applied Physics, vol. 118, no. 11, pp. 114906, 2015. View at Publisher · View at Google Scholar
  • Tahereh B. Gorji, Ranjbar, and Mirzababaei, “Optical properties of carboxyl functionalized carbon nanotube aqueous nanofluids as direct solar thermal energy absorbers,” Solar Energy, vol. 119, pp. 332–342, 2015. View at Publisher · View at Google Scholar
  • T. Shaafi, K. Sairam, A. Gopinath, G. Kumaresan, and R. Velraj, “Effect of dispersion of various nanoadditives on the performance and emission characteristics of a CI engine fuelled with diesel, biodiesel and blends—A review,” Renewable and Sustainable Energy Reviews, vol. 49, pp. 563–573, 2015. View at Publisher · View at Google Scholar
  • Siddharth Suman, Mohd. Kaleem Khan, and Manabendra Pathak, “Performance enhancement of solar collectors—A review,” Renewable and Sustainable Energy Reviews, vol. 49, pp. 192–210, 2015. View at Publisher · View at Google Scholar
  • M. R. Islam, B. Shabani, G. Rosengarten, and J. Andrews, “The potential of using nanofluids in PEM fuel cell cooling systems: A review,” Renewable & Sustainable Energy Reviews, vol. 48, pp. 523–539, 2015. View at Publisher · View at Google Scholar
  • Jésica Calvo-Bravo, David Cabaleiro, Manuel M. Piñeiro, and Luis Lugo, “Magnetorheological behaviour of propylene glycol-based hematite nanofluids,” Rheologica Acta, vol. 54, no. 9-10, pp. 757–769, 2015. View at Publisher · View at Google Scholar
  • Mahmudul Haque, Junhyo Kim, Sunghyun Kwon, Jungpil Noh, Sunchul Huh, Hanshik Chung, and Hyomin Jeong, “An experimental study on thermal characteristics of nanofluid with graphene and multi-wall carbon nanotubes,” Journal of Central South University, vol. 22, no. 8, pp. 3202–3210, 2015. View at Publisher · View at Google Scholar
  • Rao, and Srikant, “Sustainable machining utilizing vegetable oil based nanofluids,” 2015 International Conference on Smart Technologies and Management for Computing, Communication, Controls, Energy and Materials, ICSTM 2015 - Proceedings, pp. 664–672, 2015. View at Publisher · View at Google Scholar
  • Luky Hendraningrat, and Ole Torsaeter, “A Stabilizer that Enhances the Oil Recovery Process Using Silica-Based Nanofluids,” Transport In Porous Media, vol. 108, no. 3, pp. 679–696, 2015. View at Publisher · View at Google Scholar
  • Rosa Mondragón, Raúl Martínez-Cuenca, Leonor Hernández, Patricia Andreu-Cabedo, Luis Cabedo, and J. Enrique JuliáHandbook of Clean Energy Systems, pp. 1–13, 2015. View at Publisher · View at Google Scholar
  • K.H. Solangi, S.N. Kazi, M.R. Luhur, A. Badarudin, A. Amiri, Rad Sadri, M.N.M. Zubir, Samira Gharahkhani, and K.H. Teng, “A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids,” Energy, 2015. View at Publisher · View at Google Scholar
  • Shengjie Gong, Weimin Ma, Chi Wang, Yong Mei, and Hanyang Gu, “An investigation on dynamic thickness of a boiling liquid film,” International Journal of Heat and Mass Transfer, vol. 90, pp. 636–644, 2015. View at Publisher · View at Google Scholar
  • Jason Ivall, Mariam Hachem, Sylvain Coulombe, and Phillip Servio, “Behavior of Surface-Functionalized Multiwall Carbon Nanotube Nanofluids during Phase Change from Liquid Water to Solid Ice,” Crystal Growth & Design, pp. 150722142654001, 2015. View at Publisher · View at Google Scholar
  • Sabiha, Saidur, Saad Mekhilef, and Omid Mahian, “Progress and latest developments of evacuated tube solar collectors,” Renewable and Sustainable Energy Reviews, vol. 51, pp. 1038–1054, 2015. View at Publisher · View at Google Scholar
  • Kamatchi, Venkatachalapathy, and Abhinaya Srinivas, “Synthesis, stability, transport properties, and surface wettability of reduced graphene oxide/water nanofluids,” International Journal of Thermal Sciences, vol. 97, pp. 17–25, 2015. View at Publisher · View at Google Scholar
  • Jingjing Shao, Jo Darkwa, and Georgios Kokogiannakis, “Review of phase change emulsions (PCMEs) and their applications in HVAC systems,” Energy and Buildings, vol. 94, pp. 200–217, 2015. View at Publisher · View at Google Scholar
  • Mohammedalmojtaba Mohammed, and Tayfun Babadagli, “Wettability alteration: A comprehensive review of materials/methods and testing the selected ones on heavy-oil containing oil-wet systems,” Advances in Colloid and Interface Science, vol. 220, pp. 54–77, 2015. View at Publisher · View at Google Scholar
  • Kazem Bashirnezhad, Mohammad Mehdi Rashidi, Zhigang Yang, Shahab Bazri, and Wei-Mon Yan, “A comprehensive review of last experimental studies on thermal conductivity of nanofluids,” Journal of Thermal Analysis and Calorimetry, 2015. View at Publisher · View at Google Scholar
  • Shivakumara, and Dhananjaya, “Penetrative Brinkman convection in an anisotropic porous layer saturated by a nanofluid,” Ain Shams Engineering Journal, vol. 6, no. 2, pp. 703–713, 2015. View at Publisher · View at Google Scholar
  • Mathieu Lasfargues, Qiao Geng, Hui Cao, and Yulong Ding, “Mechanical dispersion of nanoparticles and its effect on the specific heat capacity of impure binary nitrate salt mixtures,” Nanomaterials, vol. 5, no. 3, pp. 1136–1146, 2015. View at Publisher · View at Google Scholar
  • Andressa C. Schneid, Marcelo B. Pereira, Flavio Horowitz, Raquel S. Mauler, Carla R. Matte, Manuela P. Klein, Plinho F. Hertz, Tania M. H. Costa, Eliana W. de Menezes, and Edilson V. Benvenutti, “Silver Nanoparticle Thin Films Deposited on Glass Surface Using an Ionic Silsesquioxane as Stabilizer and as Crosslinking Agent,” Journal Of The Brazilian Chemical Society, vol. 26, no. 5, pp. 1004–1012, 2015. View at Publisher · View at Google Scholar
  • Sadeghi, S. Gh. Etemad, Keshavarzi, and Haghshenasfard, “Investigation of alumina nanofluid stability by UV–vis spectrum,” Microfluidics and Nanofluidics, vol. 18, no. 5-6, pp. 1023–1030, 2015. View at Publisher · View at Google Scholar
  • Dhananjay Yadav, and Min Chan Kim, “Linear and non-linear analyses of Soret-driven buoyancy convection in a vertically orientated Hele-Shaw cell with nanoparticles suspension,” Computers & Fluids, 2015. View at Publisher · View at Google Scholar
  • T. Yousefi, B. Farahbakhsh, D. Naylor, and M.Z. Saghir, “Thermal field visualization of nanofluids using full-field interferometry,” International Communications in Heat and Mass Transfer, 2015. View at Publisher · View at Google Scholar
  • D. Cabaleiro, J. Nimo, M. J. Pastoriza-Gallego, M. M. Pineiro, J. L. Legido, and L. Lugo, “Thermal conductivity of dry anatase and rutile nano-powders and ethylene and propylene glycol-based TiO2 nanofluids,” Journal Of Chemical Thermodynamics, vol. 83, pp. 67–76, 2015. View at Publisher · View at Google Scholar
  • You Young Song, Bhadeshia, and Dong-Woo Suh, “Stability of stainless-steel nanoparticle and water mixtures,” Powder Technology, vol. 272, pp. 34–44, 2015. View at Publisher · View at Google Scholar
  • Jahar Sarkar, Pradyumna Ghosh, and Arjumand Adil, “A review on hybrid nanofluids: Recent research, development and applications,” Renewable and Sustainable Energy Reviews, vol. 43, pp. 164–177, 2015. View at Publisher · View at Google Scholar
  • Hussein, Noor, and Kadirgama, “Nanoparticles suspended in ethylene glycol thermal properties and applications: An overview,” Renewable and Sustainable Energy Reviews, vol. 69, pp. 1324–1330, 2015. View at Publisher · View at Google Scholar
  • Todd P. Otanicar, Ross Smith, Lenore Dai, Patrick E. Phelan, and Rajasekaran Swaminathan, “Applicability of Controllable Nanoparticle Radiative Properties for Spacecraft Heat Rejection,” Journal of Thermophysics and Heat Transfer, pp. 1–6, 2015. View at Publisher · View at Google Scholar
  • Ahmed Kadhim Hussein, “Applications of nanotechnology in renewable energies—A comprehensive overview and understanding,” Renewable and Sustainable Energy Reviews, vol. 42, pp. 460–476, 2015. View at Publisher · View at Google Scholar
  • Simge Çinar, Daniel D. Anderson, and Mufit Akinc, “Influence of bound water layer on the viscosity of oxide nanopowder suspensions,” Journal of the European Ceramic Society, vol. 35, no. 2, pp. 613–622, 2015. View at Publisher · View at Google Scholar
  • Huali Zuo, Zi Gu, Helen Cooper, and Zhi Ping Xu, “Crosslinking to enhance colloidal stability and redispersity of layered double hydroxide nanoparticles,” Journal of Colloid and Interface Science, vol. 459, pp. 10–16, 2015. View at Publisher · View at Google Scholar
  • Wail Sami Sarsam, Kazi, and Badarudin, “A review of studies on using nanofluids in flat-plate solar collectors,” Solar Energy, vol. 122, pp. 1245–1265, 2015. View at Publisher · View at Google Scholar
  • Ke Xu, Peixi Zhu, Chun Huh, and Matthew T. Balhoff, “Microfluidic Investigation of Nanoparticles’ Role in Mobilizing Trapped Oil Droplets in Porous Media,” Langmuir, vol. 31, no. 51, pp. 13673–13679, 2015. View at Publisher · View at Google Scholar
  • Yaogang Wang, Benkai Li, Changhe Li, Yanbin Zhang, Min Yang, and Xiaowei Zhang, “Technological investigation about minimum quantity lubrication grinding metallic material with nanofluid,” Recent Patents on Materials Science, vol. 8, no. 3, pp. 208–224, 2015. View at Publisher · View at Google Scholar
  • Saheed A. Adio, Mohsen Sharifpur, and Josua P. Meyer, “ Influence of ultrasonication energy on the dispersion consistency of Al 2 O 3 –glycerol nanofluid based on viscosity data, and model development for the required ultrasonication energy density ,” Journal of Experimental Nanoscience, pp. 1–20, 2015. View at Publisher · View at Google Scholar
  • Asghar H. Korayem, Mohammad Reza Barati, Shu Jian Chen, George P. Simon, Xiao Ling Zhao, and Wen Hui Duan, “Optimizing the degree of carbon nanotube dispersion in a solvent for producing reinforced epoxy matrices,” Powder Technology, vol. 284, pp. 541–550, 2015. View at Publisher · View at Google Scholar
  • Omer A. Alawi, Nor Azwadi Che Sidik, and M'hamed Beriache, “Applications of nanorefrigerant and nanolubricants in refrigeration, air-conditioning and heat pump systems: A review,” International Communications in Heat and Mass Transfer, vol. 68, pp. 91–97, 2015. View at Publisher · View at Google Scholar
  • Sabiha, Saidur, Hassani, Said, and Saad Mekhilef, “Energy performance of an evacuated tube solar collector using single walled carbon nanotubes nanofluids,” Energy Conversion and Management, vol. 105, pp. 1377–1388, 2015. View at Publisher · View at Google Scholar
  • Jan Rudolf Eggers, and Stephan Kabelac, “Absorption and Scattering Behavior of Nanofluids in the Visible Range,” International Journal Of Thermophysics, vol. 36, no. 10-11, pp. 2769–2783, 2015. View at Publisher · View at Google Scholar
  • Alina Adriana Minea, “Comparative study of turbulent heat transfer of nanofluids,” Journal of Thermal Analysis and Calorimetry, 2015. View at Publisher · View at Google Scholar
  • Swee Pin Yeap, Abdul Latif Ahmad, Boon Seng Ooi, and JitKang Lim, “Manipulating cluster size of polyanion-stabilized Fe3O4 magnetic nanoparticle clusters via electrostatic-mediated assembly for tunable magnetophoresis behavior,” Journal of Nanoparticle Research, vol. 17, no. 10, 2015. View at Publisher · View at Google Scholar
  • Yee Ho Chai, Vui Soon Chok, and Suzana Yusup, “A review on nanoparticle addition in base fluid for improvement of biodegradable ester-based drilling fluid properties,” Chemical Engineering Transactions, vol. 45, pp. 1447–1452, 2015. View at Publisher · View at Google Scholar
  • Teresa Díaz-Faes López, Alfonso Fernández González, Ángel Del Reguero, María Matos, Marta E Díaz-García, and Rosana Badía-Laíño, “Engineered silica nanoparticles as additives in lubricant oils,” Science and Technology of Advanced Materials, vol. 16, no. 5, pp. 055005, 2015. View at Publisher · View at Google Scholar
  • Kazemi-Beydokhti, Azizi Namaghi, Haj Asgarkhani, and Zeinali Heris, “Prediction of stability and thermal conductivity of SnO2 nanofluid via statistical method and an artificial neural network,” Brazilian Journal of Chemical Engineering, vol. 32, no. 4, pp. 903–917, 2015. View at Publisher · View at Google Scholar
  • Hongbin Mapp. 1–427, 2015. View at Publisher · View at Google Scholar
  • Samarshi Chakraborty, Ishita Sarkar, Krishnayan Haldar, Surjya Kanta Pal, and Sudipto Chakraborty, “Synthesis of Cu-Al layered double hydroxide nanofluid and characterization of its thermal properties,” Applied Clay Science, vol. 107, pp. 98–108, 2015. View at Publisher · View at Google Scholar
  • R. Kamatchi, and S. Venkatachalapathy, “Parametric study of pool boiling heat transfer with nanofluids for the enhancement of critical heat flux: A review,” International Journal of Thermal Sciences, vol. 87, pp. 228–240, 2015. View at Publisher · View at Google Scholar
  • Sharad Dwivedi, and Shruti Dubey, “Field-driven Motion of Ferrofluids in Ferromagnetic Nanowire under the Influence of Inertial Effects,” Procedia Engineering, vol. 127, pp. 3–9, 2015. View at Publisher · View at Google Scholar
  • A.N.M. Khalil, M.A.M. Ali, and A.I. Azmi, “Effect of Al2O3 Nanolubricant with SDBS on Tool Wear During Turning Process of AISI 1050 with Minimal Quantity Lubricant,” Procedia Manufacturing, vol. 2, pp. 130–134, 2015. View at Publisher · View at Google Scholar
  • Yu Zhen Lv, Jianxin Wang, Kai Yi, Wei Wang, and Chengrong Li, “Effect of oleic acid surface modification on dispersion stability and breakdown strength of vegetable oil-based Fe3O4 nanofluids,” Integrated Ferroelectrics, vol. 163, no. 1, pp. 21–28, 2015. View at Publisher · View at Google Scholar
  • M. Behera, and S. Ram, “Poly(vinyl pyrrolidone) Mediated Solubilization and Stabilization of Fullerene C-60 in the Form of Nanofluid in an Alcoholic Medium,” Fullerenes Nanotubes And Carbon Nanostructures, vol. 23, no. 12, pp. 1064–1072, 2015. View at Publisher · View at Google Scholar
  • Shivakumara, Dhananjaya, and Chiu-On Ng, “Thermal convective instability in an Oldroyd-B nanofluid saturated porous layer,” International Journal of Heat and Mass Transfer, vol. 84, pp. 167–177, 2015. View at Publisher · View at Google Scholar
  • Sergiy Artemenko, “Phase equilibria of nitrobenzene - n-heptane system with TiO2 nanoparticle additives,” EasternEuropean Journal of Enterprise Technologies, vol. 1, no. 6, pp. 4–8, 2015. View at Publisher · View at Google Scholar
  • Ahmed Kadhim Hussein, Ramesh Chand, and Rana, “Effect of suspended particles on the onset of thermal convection in a nanofluid layer for more realistic boundary conditions,” International Journal of Fluid Mechanics Research, vol. 42, no. 5, pp. 375–390, 2015. View at Publisher · View at Google Scholar
  • Md Jashim Uddin, Muhammad Nomani Kabir, and Yasser Alginahi, “Computational Investigation Of Hydromagnetic Thermo-Solutal Nanofluid Slip Flow In A Darcian Porous Medium With Zero Mass Flux Boundary Condition Usin,” Journal Of Porous Media, vol. 18, no. 12, pp. 1187–1200, 2015. View at Publisher · View at Google Scholar
  • Chenguang Yin, Liancun Zheng, Chaoli Zhang, and Xinxin Zhang, “Flow and heat transfer of nanofluids over a rotating porous disk with velocity slip and temperature jump,” Zeitschrift fur Naturforschung - Section A Journal of Physical Sciences, vol. 70, no. 5, pp. 351–358, 2015. View at Publisher · View at Google Scholar
  • Shantanu Bandyopadhyay, Sarwar Beg, O. P. Katare, Gajanand Sharma, and Bhupinder Singh, “QbD-Oriented Development of Self-Nanoemulsifying Drug Delivery Systems (SNEDDS) of Valsartan with Improved Biopharmaceutical Performance,” Current Drug Delivery, vol. 12, no. 5, pp. 544–563, 2015. View at Publisher · View at Google Scholar
  • Tze Siong Chew, Rusli Daik, and Muhammad Azmi Abdul Hamid, “Thermal conductivity and specific heat capacity of dodecylbenzenesulfonic acid-doped polyaniline particles-water based nanofluid,” Polymers, vol. 7, no. 7, pp. 1221–1231, 2015. View at Publisher · View at Google Scholar
  • Subramaniyan, Kotaisamy, and Ilangovan, “Optical sensing of TiO2 nanofluid for self stability,” Materials Science Forum, vol. 807, pp. 143–149, 2015. View at Publisher · View at Google Scholar
  • Ke Xu, Peixi Zhu, Tatiana Colon, Chun Huh, and Matthew Balhoff, “A Microfluidic Investigation of the Synergistic Effect of Nanoparticles and Surfactants in Macro-Emulsion-Based Enhanced Oil Recovery,” SPE Journal, 2016. View at Publisher · View at Google Scholar
  • Nur Amalina Abdul Latiff, Md Jashim Uddin, O Anwar Bég, and Ahmad Izani Ismail, “Unsteady forced bioconvection slip flow of a micropolar nanofluid from a stretching/shrinking sheet,” Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, vol. 230, no. 4, pp. 177–187, 2016. View at Publisher · View at Google Scholar
  • Mohammadreza Shabgard, Mirsadegh Seyedzavvar, and Hossein Abbasi, “Investigation into features of graphite nanofluid synthesized using electro discharge process,” The International Journal of Advanced Manufacturing Technology, 2016. View at Publisher · View at Google Scholar
  • Yanwei Sun, Gang Chen, Kai Zhao, Guangyu Rong, Hong Kang, Zheng Jin, and Xiaohua Wang, “Biological evaluation of N-2-hydroxypropyl trimethyl ammonium chloride chitosan as a carrier for the delivery of live Newcastle disease vaccine,” Carbohydrate Polymers, vol. 149, pp. 28–39, 2016. View at Publisher · View at Google Scholar
  • Rodrigo Vidonscky Pinto, and Flávio Augusto Sanzovo Fiorelli, “Review of the mechanisms responsible for heat transfer enhancement using nanofluids,” Applied Thermal Engineering, vol. 108, pp. 720–739, 2016. View at Publisher · View at Google Scholar
  • Amirsom, Ismail, and Uddin, “Three dimensional stagnation point flow of bionanofluid with variable transport properties,” Alexandria Engineering Journal, vol. 55, no. 3, pp. 1983–1993, 2016. View at Publisher · View at Google Scholar
  • Janki Shah, Sanjeev K. Gupta, Yogesh Sonvane, and Vipul Davariya, “Review: Enhancing efficiency of solar thermal engineering systems by thermophysical properties of a promising nanofluids,” Renewable and Sustainable Energy Reviews, vol. 77, pp. 1343–1348, 2016. View at Publisher · View at Google Scholar
  • Ahmed Kadhim Hussein, “Applications of nanotechnology to improve the performance of solar collectors – Recent advances and overview,” Renewable and Sustainable Energy Reviews, vol. 62, pp. 767–792, 2016. View at Publisher · View at Google Scholar
  • A.K. Rasheed, M. Khalid, W. Rashmi, T.C.S.M. Gupta, and A. Chan, “Graphene based nanofluids and nanolubricants – Review of recent developments,” Renewable and Sustainable Energy Reviews, vol. 63, pp. 346–362, 2016. View at Publisher · View at Google Scholar
  • K. Sathish Kumar, and Chitra, “Heat transfer enhancement using single base and double base nanofluids,” Journal of Molecular Liquids, vol. 221, pp. 1128–1132, 2016. View at Publisher · View at Google Scholar
  • Milad Nabipour, Peyman Keshavarz, and Sona Raeissi, “Experimental investigation on CO2 absorption in Sulfinol-M based Fe3O4 and MWCNT nanofluids,” International Journal of Refrigeration, 2016. View at Publisher · View at Google Scholar
  • Hosseini, and Alavianmehr, “New version of Tammann-Tait equation: Application to nanofluids,” Journal of Molecular Liquids, vol. 220, pp. 404–408, 2016. View at Publisher · View at Google Scholar
  • Vakili, Hosseinalipour, Delfani, and Khosrojerdi, “Photothermal properties of graphene nanoplatelets nanofluid for low-temperature direct absorption solar collectors,” Solar Energy Materials and Solar Cells, vol. 152, pp. 187–191, 2016. View at Publisher · View at Google Scholar
  • Mridul Krishnam, Sujoy Bose, and Chandan Das, “Boron nitride (BN) nanofluids as cooling agent in thermal management system (TMS),” Applied Thermal Engineering, vol. 106, pp. 951–958, 2016. View at Publisher · View at Google Scholar
  • Stephan Kabelac, and Jan Rudolf Eggers, “Nanofluids revisited,” Applied Thermal Engineering, vol. 106, pp. 1114–1126, 2016. View at Publisher · View at Google Scholar
  • Rizalman Mamat, Sharma, Mohamad, Azmi, and Abdul Hamid, “Effects of working temperature on thermo-physical properties and forced convection heat transfer of TiO2 nanofluids in water-Ethylene glycol mixture,” Applied Thermal Engineering, vol. 106, pp. 1190–1199, 2016. View at Publisher · View at Google Scholar
  • M. Gulzar, H. H. Masjuki, M. A. Kalam, M. Varman, N. W. M. Zulkifli, R. A. Mufti, and Rehan Zahid, “Tribological performance of nanoparticles as lubricating oil additives,” Journal of Nanoparticle Research, vol. 18, no. 8, 2016. View at Publisher · View at Google Scholar
  • Usri, Mohamad, Azmi, Abdul Hamid, and Rizalman Mamat, “Heat transfer and friction factor of water and ethylene glycol mixture based TiO2 and Al2O3 nanofluids under turbulent flow,” International Communications in Heat and Mass Transfer, vol. 76, pp. 24–32, 2016. View at Publisher · View at Google Scholar
  • Tahani, Vakili, and Khosrojerdi, “Experimental evaluation and ANN modeling of thermal conductivity of graphene oxide nanoplatelets/deionized water nanofluid,” International Communications in Heat and Mass Transfer, vol. 76, pp. 358–365, 2016. View at Publisher · View at Google Scholar
  • Nahai Cao, Mohammed Almojtaba Mohammed, and Tayfun Babadagli, “Wettability Alteration of Heavy-Oil-Bitumen-Containing Carbonates by Use of Solvents, High-pH Solutions, and Nano/Ionic Liquids,” SPE Reservoir Evaluation & Engineering, 2016. View at Publisher · View at Google Scholar
  • Dattatraya Subhedar, and Bharat Ramani, “Experimental investigation on thermal conductivity and viscosity of Al2O3/mono ethylene glycol and water mixture nanofluids as a car radiator coolant,” Advances and Applications in Fluid Mechanics, vol. 19, no. 3, pp. 575–587, 2016. View at Publisher · View at Google Scholar
  • Jyoti Prakash, and Vishnu P. Agrawal, “Concurrent design of nanofluid for x-abilities using MADM approach,” Benchmarking: An International Journal, vol. 23, no. 5, pp. 1286–1311, 2016. View at Publisher · View at Google Scholar
  • Omer A. Alawi, Nor Azwadi Che Sidik, and A.Sh. Kherbeet, “The effects of nanolubricants on boiling and two phase flow phenomena: A review,” International Communications in Heat and Mass Transfer, vol. 75, pp. 197–205, 2016. View at Publisher · View at Google Scholar
  • Wail Sami Sarsam, Ahmad Amiri, Mohd Nashrul Mohd Zubir, Hooman Yarmand, S. N. Kazi, and A. Badarudin, “Stability and thermophysical properties of water-based nanofluids containing triethanolamine-treated graphene nanoplatelets with different specific su,” Colloids And Surfaces A-Physicochemical And Engineering Aspects, vol. 500, pp. 17–31, 2016. View at Publisher · View at Google Scholar
  • Babita, S.K. Sharma, and Gupta Shipra Mital, “Preparation and evaluation of stable nanofluids for heat transfer application: A review,” Experimental Thermal and Fluid Science, 2016. View at Publisher · View at Google Scholar
  • Tao Wang, Wei Yu, Fei Liu, Mengxiang Fang, Muhammad Farooq, and Zhongyang Luo, “ Enhanced CO 2 Absorption and Desorption by Monoethanolamine (MEA)-Based Nanoparticle Suspensions ,” Industrial & Engineering Chemistry Research, 2016. View at Publisher · View at Google Scholar
  • Dhinesh Kumar Devendiran, and Valan Arasu Amirtham, “A review on preparation, characterization, properties and applications of nanofluids,” Renewable and Sustainable Energy Reviews, vol. 60, pp. 21–40, 2016. View at Publisher · View at Google Scholar
  • Harkirat Sandhu, D. Gangacharyulu, and V. P. Agrawal, “Coding, Evaluation, Comparison, Ranking and Optimal Selection of Nanoparticles with Heat Transfer Fluids for Thermal Systems,” Particulate Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Shoji Mori, Suazlan Mt Aznam, Ryuta Yanagisawa, and Kunito Okuyama, “CHF enhancement by honeycomb porous plate in saturated pool boiling of nanofluid,” Journal of Nuclear Science and Technology, vol. 53, no. 7, pp. 1028–1035, 2016. View at Publisher · View at Google Scholar
  • Emad H. Aly, “Existence of the multiple exact solutions for nanofluid flow over a stretching/shrinking sheet embedded in a porous medium at the presence of magnetic field with electrical conductivity and thermal radiation effects,” Powder Technology, 2016. View at Publisher · View at Google Scholar
  • M.Z. Sharif, W.H. Azmi, A.A.M. Redhwan, and R. Mamat, “Investigation of thermal conductivity and viscosity of Al2O3/PAG nanolubricant for application in automotive air conditioning system,” International Journal of Refrigeration, 2016. View at Publisher · View at Google Scholar
  • Amir Menbari, Ali Akbar Alemrajabi, and Yousef Ghayeb, “Investigation on the stability, viscosity and extinction coefficient of CuO-Al2O3/Water binary mixture nanofluid,” Experimental Thermal and Fluid Science, vol. 74, pp. 122–129, 2016. View at Publisher · View at Google Scholar
  • Ly B.T. La, Yee-Kwong Leong, Harry P. Watts, Pek I. Au, Kevin J. Hayward, and Lai-Chang Zhang, “A novel approach for the preparation of nanosized Gd2O3 structure: the influence of surface force on the morphology of ball milled particles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2016. View at Publisher · View at Google Scholar
  • Mathieu Lasfargues, Andrew Bell, and Yulong Ding, “In situ production of titanium dioxide nanoparticles in molten salt phase for thermal energy storage and heat-transfer fluid applications,” Journal of Nanoparticle Research, vol. 18, no. 6, 2016. View at Publisher · View at Google Scholar
  • Abdolbaqi, Azmi, Rizalman Mamat, Sharma, and Najafi, “Experimental investigation of thermal conductivity and electrical conductivity of BioGlycol-water mixture based Al2O3 nanofluid,” Applied Thermal Engineering, vol. 102, pp. 932–941, 2016. View at Publisher · View at Google Scholar
  • Wail Sami Sarsam, Ahmad Amiri, S. N. Kazi, and A. Badarudin, “Stability and thermophysical properties of non-covalently functionalized graphene nanoplatelets nanofluids,” Energy Conversion And Management, vol. 116, pp. 101–111, 2016. View at Publisher · View at Google Scholar
  • Zhenjun Ma, Wenye Lin, and M. Imroz Sohel, “Nano-enhanced phase change materials for improved building performance,” Renewable and Sustainable Energy Reviews, vol. 58, pp. 1256–1268, 2016. View at Publisher · View at Google Scholar
  • Harkirat Kaur Sandhu, and D. Gangacharyulu, “An Experimental Study on Stability and Some Thermophysical Properties of Multiwalled Carbon Nanotubes with Water-Ethylene Glycol Mixtures,” Particulate Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Nazek El-Atab, and Ammar Nayfeh, “1D versus 3D quantum confinement in 1–5 nm ZnO nanoparticle agglomerations for application in charge-trapping memory devices,” Nanotechnology, vol. 27, no. 27, pp. 275205, 2016. View at Publisher · View at Google Scholar
  • M Mohammadpourfard, and F Ghaderi, “Numerical study of biofluid flow over a backward-facing step: The hydro-thermal behavior in the presence of magnetic field effects,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 231, no. 4, pp. 800–812, 2016. View at Publisher · View at Google Scholar
  • Amir Fartaj, Mohammed Ismail, and Shahram Fotowat, “Transient Response of Minichannel Heat Exchanger Using Al2O3-EG/W Nanofluid,” SAE Technical Papers, vol. 2016-, no. April, 2016. View at Publisher · View at Google Scholar
  • Shoham, Gavrielatos, and Mohan, “Effect of intermediate wettability nanoparticles on oil-water emulsion stability,” Journal of Petroleum Science and Engineering, vol. 152, pp. 664–674, 2016. View at Publisher · View at Google Scholar
  • Sarafraz, Hormozi, and Peyghambarzadeh, “Pool boiling heat transfer to aqueous alumina nano-fluids on the plain and concentric circular micro-structured (CCM) surfaces,” Experimental Thermal and Fluid Science, vol. 72, pp. 125–139, 2016. View at Publisher · View at Google Scholar
  • K. Abdul Hamid, Sharma, Azmi, and Rizalman Mamat, “Experimental investigation on heat transfer performance of TiO2 nanofluids in water-ethylene glycol mixture,” International Communications in Heat and Mass Transfer, vol. 73, pp. 16–24, 2016. View at Publisher · View at Google Scholar
  • Farid Heshmati, and Hakan Ertürk, “Single-phase models for improved estimation of friction factor for laminar nanofluid flow in pipes,” International Journal of Heat and Mass Transfer, vol. 95, pp. 416–425, 2016. View at Publisher · View at Google Scholar
  • M.J. Uddin, Puneet Rana, O. Anwar Bég, and A.I.Md. Ismail, “Finite element simulation of magnetohydrodynamic convective nanofluid slip flow in porous media with nonlinear radiation,” Alexandria Engineering Journal, 2016. View at Publisher · View at Google Scholar
  • Jinho Lee, Dhananjay Yadav, and Agrawal, “Thermal instability in a rotating nanofluid layer: A revised model,” Ain Shams Engineering Journal, vol. 7, no. 1, pp. 431–440, 2016. View at Publisher · View at Google Scholar
  • Maria Cannio, Chiara Ponzoni, Magdalena Lassinantti Gualtieri, Eleonora Lugli, Cristina Leonelli, and Marcello Romagnoli, “Stabilization and thermal conductivity of aqueous magnetite nanofluid from continuous flows hydrothermal microwave synthesis,” Materials Letters, 2016. View at Publisher · View at Google Scholar
  • Josua P. Meyer, Saheed A. Adio, Mohsen Sharifpur, and Paul N. Nwosu, “The Viscosity of Nanofluids: A Review of the Theoretical, Empirical, and Numerical Models,” Heat Transfer Engineering, vol. 37, no. 5, pp. 387–421, 2016. View at Publisher · View at Google Scholar
  • Kiruba Krishnaswamy, and Valérie Orsat, “Gold nanofluids synthesised using antioxidant catechin, its characterisation and studies on nucleation,” Journal of Experimental Nanoscience, vol. 11, no. 5, pp. 328–344, 2016. View at Publisher · View at Google Scholar
  • Padmini, Vamsi Krishna, and Krishna Mohana Rao, “Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel,” Tribology International, vol. 94, pp. 490–501, 2016. View at Publisher · View at Google Scholar
  • Marcin Lemanowicz, Andrzej Gierczycki, Wojciech Kuźnik, Joanna Milczyńska, and Paweł Bulanda, “Application of thermosensitive polymers in stabilization of colloids,” Advanced Powder Technology, 2016. View at Publisher · View at Google Scholar
  • Amin Sabaghan, Mojtaba Edalatpour, Mohammad Charjouei Moghadam, Ehsan Roohi, and Hamid Niazmand, “Nanofluid flow and heat transfer in a microchannel with longitudinal vortex generators: two-phase numerical simulation,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Askari, Lotfi, Seifkordi, Rashidi, and Koolivand, “A novel approach for energy and water conservation in wet cooling towers by using MWNTs and nanoporous graphene nanofluids,” Energy Conversion and Management, vol. 109, pp. 10–18, 2016. View at Publisher · View at Google Scholar
  • Jianlin Yu, Ruixiang Wang, and Meibo Xing, “Effects of surface modification on the pool boiling heat transfer of MWNTs/water nanofluids,” International Journal of Heat and Mass Transfer, vol. 103, pp. 914–919, 2016. View at Publisher · View at Google Scholar
  • Nieto de Castro, and S.M. Sohel Murshed, “Conduction and convection heat transfer characteristics of ethylene glycol based nanofluids – A review,” Applied Energy, vol. 184, pp. 681–695, 2016. View at Publisher · View at Google Scholar
  • Hassan Zareshahi, Majid Emami-Meibodi, and Abbas Behjat, “Cautions required for the boiling test of a silver–water nanofluid,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, vol. 52, no. 12, pp. 2895–2900, 2016. View at Publisher · View at Google Scholar
  • Suleiman Akilu, K.V. Sharma, Aklilu Tesfamichael Baheta, and Rizalman Mamat, “A review of thermophysical properties of water based composite nanofluids,” Renewable and Sustainable Energy Reviews, vol. 66, pp. 654–678, 2016. View at Publisher · View at Google Scholar
  • Zawawi, Redhwan, Azmi, and Sharif, “Thermal conductivity enhancement of Al2O3 and SiO2 nanolubricants for application in automotive air conditioning (AAC) system,” MATEC Web of Conferences, vol. 90, 2016. View at Publisher · View at Google Scholar
  • Chia-Wei Chang, and Ying-Chih Liao, “Accelerated Sedimentation Velocity Assessment for Nanowires Stabilized in a Non-Newtonian Fluid,” Langmuir, vol. 32, no. 51, pp. 13620–13626, 2016. View at Publisher · View at Google Scholar
  • Long Zhang, Leilei Chen, Jian Liu, Xiaoming Fang, and Zhengguo Zhang, “Effect of morphology of carbon nanomaterials on thermo-physical characteristics, optical properties and photo-thermal conversion performance of nanofluids,” Renewable Energy, vol. 99, pp. 888–897, 2016. View at Publisher · View at Google Scholar
  • Wenxiu He, Jianbing Ji, Zhiliang Zhang, Jianzhong Zheng, and Guangquan Wang, “Rice Husk Ash-Derived Silica Nanofluids: Synthesis and Stability Study,” Nanoscale Research Letters, vol. 11, no. 1, 2016. View at Publisher · View at Google Scholar
  • Syarif, “Characteristics of ethylene glycol-Al2O3 nanofluids prepared by utilizing Al2O3 nanoparticles synthesized from local bauxite,” Journal of Physics: Conference Series, vol. 776, no. 1, 2016. View at Publisher · View at Google Scholar
  • Jason Ivall, Gabriel Langlois-Rahme, Sylvain Coulombe, and Phillip Servio, “Quantitative stability analyses of multiwall carbon nanotube nanofluids following water/ice phase change cycling,” Nanotechnology, vol. 28, no. 5, pp. 055702, 2016. View at Publisher · View at Google Scholar
  • Jianyang Zhou, Xiaoping Luo, Mingyu Xie, and Cong Deng, “Influence of nanoparticle concentration on pressure drop of Al2O3/R141b boiling flow in micro heat exchanger by direct metal laser sintering,” Huagong Xuebao/CIESC Journal, vol. 67, no. 11, pp. 4587–4598, 2016. View at Publisher · View at Google Scholar
  • Balakumaran, Dhanapal, Kalaichelvan, Balashanmugam, and Murugan, “Phytogenic synthesis of silver nanoparticles, optimization and evaluation of in vitro antifungal activity against human and plant pathogens,” Microbiological Research, vol. 192, pp. 52–64, 2016. View at Publisher · View at Google Scholar
  • Koji Enoki, Tomio Okawa, Muhamad Zuhairi Sulaiman, and Daisuke Matsuo, “Systematic measurements of heat transfer characteristics in saturated pool boiling of water-based nanofluids,” International Journal of Heat and Mass Transfer, vol. 102, pp. 264–276, 2016. View at Publisher · View at Google Scholar
  • Tushar Sharma, Stefan Iglauer, and Jitendra S. Sangwai, “Silica Nanofluids in an Oilfield Polymer Polyacrylamide: Interfacial Properties, Wettability Alteration, and Applications for Chemical Enhanced Oil Recovery,” Industrial & Engineering Chemistry Research, 2016. View at Publisher · View at Google Scholar
  • Kamatchi, Venkatachalapathy, and Nithya, “Experimental investigation and mechanism of critical heat flux enhancement in pool boiling heat transfer with nanofluids,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, vol. 52, no. 11, pp. 2357–2366, 2016. View at Publisher · View at Google Scholar
  • ZareNezhad, Allahyar, and Hormozi, “An experimental investigation on the effects of surfactants on the thermal performance of hybrid nanofluids in helical coil heat exchangers,” International Communications in Heat and Mass Transfer, vol. 78, pp. 271–276, 2016. View at Publisher · View at Google Scholar
  • Rashidi, Koolivand, Askari, Lotfi, and Koolivand-Salooki, “Rheological and thermophysical properties of ultra-stable kerosene-based Fe3O4/Graphene nanofluids for energy conservation,” Energy Conversion and Management, vol. 128, pp. 134–144, 2016. View at Publisher · View at Google Scholar
  • Jisu Yoon, Dong Min Kim, and Seung Wook Baek, “Ignition characteristics of kerosene droplets with the addition of aluminum nanoparticles at elevated temperature and pressure,” Combustion and Flame, vol. 173, pp. 1339–1351, 2016. View at Publisher · View at Google Scholar
  • Manikandan, and Rajan, “Sand-propylene glycol-water nanofluids for improved solar energy collection,” Energy, vol. 113, pp. 917–929, 2016. View at Publisher · View at Google Scholar
  • Beybin Ilhan, Melike Kurt, and Hakan Ertürk, “Experimental investigation of heat transfer enhancement and viscosity change of hBN nanofluids,” Experimental Thermal and Fluid Science, vol. 77, pp. 272–283, 2016. View at Publisher · View at Google Scholar
  • Jason Ivall, Sylvain Coulombe, Phillip Servio, and Jean-Sébastien Renault-Crispo, “Ice-dependent liquid-phase convective cells during the melting of frozen sessile droplets containing water and multiwall carbon nanotubes,” International Journal of Heat and Mass Transfer, vol. 101, pp. 27–37, 2016. View at Publisher · View at Google Scholar
  • Dattatraya G. Subhedar, Bharat M. Ramani, and Akhilesh Gupta, “ Experimental Investigation of Overall Heat Transfer Coefficient of Al 2 O 3 /Water-Mono Ethylene Glycol Nanofluids in an Automotive Radiator ,” Heat Transfer-Asian Research, 2016. View at Publisher · View at Google Scholar
  • Laura C.J. Pereira, Joana T. Coutinho, Isabel M.M. Ferreira, Paula I.P. Soares, César A.T. Laia, Alexandra Carvalho, Carlos M.M. Novo, and João Paulo Borges, “Iron oxide nanoparticles stabilized with a bilayer of oleic acid for magnetic hyperthermia and MRI applications,” Applied Surface Science, vol. 383, pp. 240–247, 2016. View at Publisher · View at Google Scholar
  • Sebastian H. Etschel, Rik R. Tykwinski, and Marcus Halik, “Enhancing the Dispersibility of TiO2 Nanorods and Gaining Control over Region-Selective Layer Formation,” Langmuir, vol. 32, no. 41, pp. 10604–10609, 2016. View at Publisher · View at Google Scholar
  • M. Gulzar, H. H. Masjuki, M. A. Kalam, M. Varman, N. W. M. Zulkifli, R. A. Mufti, R. Zahid, and R. Yunus, “ Dispersion Stability and Tribological Characteristics of TiO 2 /SiO 2 Nanocomposite-Enriched Biobased Lubricant ,” Tribology Transactions, vol. 60, no. 4, pp. 670–680, 2016. View at Publisher · View at Google Scholar
  • B M Paramashivaiah, and C R Rajashekhar, “Studies on effect of various surfactants on stable dispersion of graphene nano particles in simarouba biodiesel,” IOP Conference Series: Materials Science and Engineering, vol. 149, pp. 012083, 2016. View at Publisher · View at Google Scholar
  • Mahesh Patil, Jae-Hyeong Seo, Suk-Ju Kang, and Moo-Yeon Lee, “Review on Synthesis, Thermo-Physical Property, and Heat Transfer Mechanism of Nanofluids,” Energies, vol. 9, no. 10, pp. 840, 2016. View at Publisher · View at Google Scholar
  • Y K Fang, M Osama, W Rashmi, K Shahbaz, M Khalid, F S Mjalli, and M M Farid, “Synthesis and thermo-physical properties of deep eutectic solvent-based graphene nanofluids,” Nanotechnology, vol. 27, no. 7, pp. 075702, 2016. View at Publisher · View at Google Scholar
  • Lioua Kolsi, Ahmed Kadhim Hussein, and Walunj, “Applications of nanotechnology to enhance the performance of the direct absorption solar collectors,” Journal of Thermal Engineering, vol. 2, no. 1, pp. 529–540, 2016. View at Publisher · View at Google Scholar
  • R. Martinez-Cuenca, R. Mondragon, L. Hernandez, C. Segarra, J.C. Jarque, T. Hibiki, and J.E. Julia, “Forced-convective heat-transfer coefficient and pressure drop of water-based nanofluids in a horizontal pipe,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Gaweł Żyła, “Thermophysical properties of ethylene glycol based yttrium aluminum garnet (Y3Al5O12–EG) nanofluids,” International Journal of Heat and Mass Transfer, vol. 92, pp. 751–756, 2016. View at Publisher · View at Google Scholar
  • Sarafraz, Kiani, and Hormozi, “Critical heat flux and pool boiling heat transfer analysis of synthesized zirconia aqueous nano-fluids,” International Communications in Heat and Mass Transfer, vol. 70, pp. 75–83, 2016. View at Publisher · View at Google Scholar
  • Amir Menbari, Ali Akbar Alemrajabi, and Yousef Ghayeb, “Experimental investigation of stability and extinction coefficient of Al2O3-CuO binary nanoparticles dispersed in ethylene glycol-water mixture for low-temperature direct absorption solar collectors,” Energy Conversion and Management, vol. 108, pp. 501–510, 2016. View at Publisher · View at Google Scholar
  • M. Behera, and S. Ram, “Variation of optical properties, rheology, and microstructure in fullerene/poly(vinyl pyrrolidone) nanofluids with fullerene content in n-butanol,” Fullerenes Nanotubes And Carbon Nanostructures, vol. 24, no. 2, pp. 154–161, 2016. View at Publisher · View at Google Scholar
  • Yafeng Chen, Weiwei Chen, Anqi Dong, Xiande Fang, Helei Zhang, and Run Wang, “Heat transfer and critical heat flux of nanofluid boiling: A comprehensive review,” Renewable and Sustainable Energy Reviews, vol. 62, pp. 924–940, 2016. View at Publisher · View at Google Scholar
  • Hepbasli, Said, Sabiha, Saidur, and Rahim, “Energy and exergy efficiency of a flat plate solar collector using pH treated Al2O3 nanofluid,” Journal of Cleaner Production, vol. 112, pp. 3915–3926, 2016. View at Publisher · View at Google Scholar
  • Chok Vui Soon, Chai Yee Ho, Suzana Yusup, and Mohamad Taufiq Arpin, “Rheological Behaviour of Graphene Nano-sheets in Hydrogenated Oil-based Drilling Fluid,” Procedia Engineering, vol. 148, pp. 49–56, 2016. View at Publisher · View at Google Scholar
  • Stephen Sie Kiong Kiu, Suzana Yusup, Chok Vui Soon, Taufiq Arpin, and Syahrullail Samion, “Lubricant Enhancement via Hydrodynamic and Acoustic Cavitation,” Procedia Engineering, vol. 148, pp. 57–63, 2016. View at Publisher · View at Google Scholar
  • Suhaib Umer Ilyas, Rajashekhar Pendyala, and Narahari Marneni, “Stability and Agglomeration of Alumina Nanoparticles in Ethanol-Water Mixtures,” Procedia Engineering, vol. 148, pp. 290–297, 2016. View at Publisher · View at Google Scholar
  • Nimet Doner, Selim Ahlatli, Thierry Mare, and Patrice Estelle, “Thermal performance of carbon nanotube nanofluids in solar microchannel collectors: An experimental study,” International Journal of Technology, vol. 7, no. 2, pp. 219–226, 2016. View at Publisher · View at Google Scholar
  • Lee Kean Chuan, Muhammad Adil, Hasnah Mohd Zaid, and Noor Rasyada Ahmad Latiff, “Influence of electromagnetic waves on viscosity and electrorheology of dielectric nanofluids-scale-based approach,” Jurnal Teknologi, vol. 78, no. 6-4, pp. 49–54, 2016. View at Publisher · View at Google Scholar
  • Ketan Ajay, and Lal Kundan, “ Combined Experimental and CFD Investigation of the Parabolic Shaped Solar Collector Utilizing Nanofluid (CuO-H 2 O and SiO 2 -H 2 O) as a Working Fluid ,” Journal of Engineering, vol. 2016, pp. 1–11, 2016. View at Publisher · View at Google Scholar
  • Mohamoud Jama, Seifelislam Mahmoud Gamaleldin, Muammer Koc, Tejvir Singh, Ayman Samara, Rima J. Isaifan, and Muataz A. Atieh, “Critical Review on Nanofluids: Preparation, Characterization, and Applications,” Journal of Nanomaterials, vol. 2016, 2016. View at Publisher · View at Google Scholar
  • Muhammad Rafiq, Yuzhen Lv, and Chengrong Li, “A Review on Properties, Opportunities, and Challenges of Transformer Oil-Based Nanofluids,” Journal of Nanomaterials, vol. 2016, pp. 1–23, 2016. View at Publisher · View at Google Scholar
  • Mehrdad Karimzadehkhouei, Kürsat Sendur, Pinar Mengüç, Abdolali Khalili Sadaghiani, and Ali Kosar, “Experimental study on heat transfer of multi-walled carbon nanotubes/water nanofluids in horizontal microtubes,” ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2016, vol. 1, 2016. View at Publisher · View at Google Scholar
  • Jia-Qi Li, Li-Wu Fan, Liang Zhang, and Zi-Tao Yu, “An experimental study of boiling heat transfer during Quenching of nanofluids with carbon nanotubes of various sizes,” ASME 2016 Heat Transfer Summer Conference, HT 2016, collocated with the ASME 2016 Fluids Engineering Division Summer Meeting and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, vol. 2, 2016. View at Publisher · View at Google Scholar
  • Ramesh Chand, and Rana, “Electrothermo convection of rotating nanofluid in brinkman porous medium,” Special Topics and Reviews in Porous Media, vol. 7, no. 2, pp. 181–194, 2016. View at Publisher · View at Google Scholar
  • Aparna Zagabathuni, Sudipto Ghosh, and Shyamal Kumar Pabi, “The difference in the thermal conductivity of nanofluids measured by different methods and its rationalization,” Beilstein Journal of Nanotechnology, vol. 7, no. 1, pp. 2037–2044, 2016. View at Publisher · View at Google Scholar
  • Bhat, Suliamon, Wajid Ur Rehman, and M. Irfan Khan, “Effect of sonication on the stability of nanofluids based on the mixture of kapok seeds oil and multi walled carbon nanotubes,” Key Engineering Materials, vol. 694, pp. 213–217, 2016. View at Publisher · View at Google Scholar
  • Pandey, and Prince Kumar, “Effect on heat transfer characteristics of nanofluids flowing under laminar and turbulent flow regime - A review,” IOP Conference Series: Materials Science and Engineering, vol. 225, no. 1, 2017. View at Publisher · View at Google Scholar
  • Amir Javad Ahrar, and Mohammad Hassan Djavareshkian, “Computational investigation of heat transfer and entropy generation rates of Al2O3 nanofluid with Buongiorno's model and using a novel TVD hybrid LB method,” Journal of Molecular Liquids, vol. 242, pp. 24–39, 2017. View at Publisher · View at Google Scholar
  • Kazem Bashirnezhad, Mohammad Ghavami, and Abdullah A.A.A. Alrashed, “Experimental investigations of nanofluids convective heat transfer in different flow regimes: A review,” Journal of Molecular Liquids, 2017. View at Publisher · View at Google Scholar
  • Swee Pin Yeap, “Permanent agglomerates in powdered nanoparticles: Formation and future prospects,” Powder Technology, 2017. View at Publisher · View at Google Scholar
  • A. Bintul Huda, and Noreen Sher Akbar, “Heat transfer analysis with temperature-dependent viscosity for the peristaltic flow of nano fluid with shape factor over heated tube,” International Journal of Hydrogen Energy, 2017. View at Publisher · View at Google Scholar
  • Yang Yuan, Xiangdong Li, and Jiyuan Tu, “The effects of nanoparticles on the lift force and drag force on bubbles in nanofluids: A two-fluid model study,” International Journal of Thermal Sciences, vol. 119, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Abdul Orlando Cárdenas Gómez, Juan Gabriel Paz Alegrias, and Enio Pedone Bandarra Filho, “Experimental analysis of the thermal-hydraulic performance of water based silver and SWCNT nanofluids in single-phase flow,” Applied Thermal Engineering, vol. 124, pp. 1176–1188, 2017. View at Publisher · View at Google Scholar
  • Aditya Kumar, and Sudhakar Subudhi, “Preparation, characteristics, convection and applications of magnetic nanofluids: A review,” Heat and Mass Transfer, 2017. View at Publisher · View at Google Scholar
  • Sreeja Nair, Krishna K. Pandey, Giridhar, and Vijayalakshmi, “Decay resistance of rubberwood (Hevea brasiliensis) impregnated with ZnO and CuO nanoparticles dispersed in propylene glycol,” International Biodeterioration and Biodegradation, vol. 122, pp. 100–106, 2017. View at Publisher · View at Google Scholar
  • Azmi, Rizalman Mamat, Nabil, Abdul Hamid, and Ftwi Y. Hagos, “An experimental study on the thermal conductivity and dynamic viscosity of TiO2-SiO2 nanofluids in water: Ethylene glycol mixture,” International Communications in Heat and Mass Transfer, vol. 86, pp. 181–189, 2017. View at Publisher · View at Google Scholar
  • Tariq Javed, Ziafat Mehmood, Muhammad Arshad Siddiqui, and Ioan Pop, “Study of heat transfer in water-Cu nanofluid saturated porous medium through two entrapped trapezoidal cavities under the influence of magnetic field,” Journal of Molecular Liquids, vol. 240, pp. 402–411, 2017. View at Publisher · View at Google Scholar
  • Majid Mohammadi, Mitra Dadvar, and Bahram Dabir, “TiO2/SiO2 nanofluids as novel inhibitors for the stability of asphaltene particles in crude oil: Mechanistic understanding, screening, modeling, and optimization,” Journal of Molecular Liquids, vol. 238, pp. 326–340, 2017. View at Publisher · View at Google Scholar
  • Noreen Sher Akbar, Adil Wahid Butt, and Dharmendra Tripathi, “Nanoparticle Shapes Effects on Unsteady Physiological Transport of Nanofluids through a Finite Length Non-Uniform Channel,” Results in Physics, 2017. View at Publisher · View at Google Scholar
  • Scott B. Jacob, Jingxuan Guo, Gary C. Barber, David J. Schall, and Qian Zou, “Tribological properties of ZnO and WS2 nanofluids using different surfactants,” Wear, vol. 382-383, pp. 8–14, 2017. View at Publisher · View at Google Scholar
  • Yubai Li, Hongbin Yan, Mehrdad Massoudi, and Wei-Tao Wu, “Effects of Anisotropic Thermal Conductivity and Lorentz Force on the Flow and Heat Transfer of a Ferro-Nanofluid in a Magnetic Field,” Energies, vol. 10, no. 7, pp. 1065, 2017. View at Publisher · View at Google Scholar
  • Liu Yang, and Yuhan Hu, “Toward TiO2 Nanofluids?Part 1: Preparation and Properties,” Nanoscale Research Letters, vol. 12, no. 1, 2017. View at Publisher · View at Google Scholar
  • Ahmad, Arief, Awang, Zakaria, and Ahmad, “Characteristics of mineral oil-based nanofluids for power transformer application,” International Journal of Electrical and Computer Engineering, vol. 7, no. 3, pp. 1530–1537, 2017. View at Publisher · View at Google Scholar
  • Hyo-Seob Kim, Fikret Yilmaz, Dong-Jin Lee, Soon-Jik Hong, Peyala Dharmaiah, and Tae-Haeng Lee, “Characterization of Cu and Ni Nano-Fluids Synthesized by Pulsed Wire Evaporation Method,” Archives of Metallurgy and Materials, vol. 62, no. 2, pp. 999–1004, 2017. View at Publisher · View at Google Scholar
  • Ahmad, Al-Sulaiman, Saidur, and Mahbubul, “Optical properties of various nanofluids used in solar collector: A review,” Renewable and Sustainable Energy Reviews, vol. 73, pp. 1014–1030, 2017. View at Publisher · View at Google Scholar
  • Wenzhen Xia, Jingwei Zhao, Hui Wu, Sihai Jiao, and Zhengyi Jiang, “Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles on the tribological behaviour of oxidised high-speed steel,” Tribology International, vol. 110, pp. 77–85, 2017. View at Publisher · View at Google Scholar
  • Samarshi Chakraborty, Jay M. Jha, Sudipto Chakraborty, Ishita Sarkar, and Surjya K. Pal, “Ultrafast cooling of a hot steel plate using Cu-Al layered double hydroxide nanofluid jet,” International Journal of Thermal Sciences, vol. 116, pp. 52–62, 2017. View at Publisher · View at Google Scholar
  • Pryazhnikov, Minakov, Guzei, Zeer, and V. Ya. Rudyak, “The experimental study of nanofluids boiling crisis on cylindrical heaters,” International Journal of Thermal Sciences, vol. 116, pp. 214–223, 2017. View at Publisher · View at Google Scholar
  • Jessica de Almeida Roger, Massimiliano Magro, Silvia Spagnolo, Emanuela Bonaiuto, Davide Baratella, Luca Fasolato, and Fabio Vianello, “Antimicrobial and magnetically removable tannic acid nanocarrier: a processing aid for Listeria monocytogenes treatment for food industry applications,” Food Chemistry, 2017. View at Publisher · View at Google Scholar
  • Akbarzadeh, Rashidi, Ellahi, Esfahani, and Rosen, “Influences of wavy wall and nanoparticles on entropy generation over heat exchanger plat,” International Journal of Heat and Mass Transfer, vol. 109, pp. 1162–1171, 2017. View at Publisher · View at Google Scholar
  • Suhaib Umer Ilyas, Rajashekhar Pendyala, Marneni Narahari, and Lim Susin, “Stability, rheology and thermal analysis of functionalized alumina- thermal oil-based nanofluids for advanced cooling systems,” Energy Conversion and Management, vol. 142, pp. 215–229, 2017. View at Publisher · View at Google Scholar
  • Goldstein, Gordeev, and Sandakov, “On the Flow Conditions at the Fluid: Permeable Surface Interface,” Transport in Porous Media, vol. 118, no. 2, pp. 271–280, 2017. View at Publisher · View at Google Scholar
  • Hiroto Sakashita, Shinichi Morooka, Takaharu Tsuruta, Wei Liu, Hisashi Umekawa, Yasuo Koizumi, Niro Nagai, Shoji Mori, Masahiro Shoji, Yoshihiko Haramura, and Hiroyasu Ohtakepp. 145–368, 2017. View at Publisher · View at Google Scholar
  • Li-Wu Fan, Jia-Qi Li, Yue-Zi Wu, Liang Zhang, and Zi-Tao Yu, “Pool boiling heat transfer during quenching in carbon nanotube (CNT)-based aqueous nanofluids: Effects of length and diameter of the CNTs,” Applied Thermal Engineering, 2017. View at Publisher · View at Google Scholar
  • Debashis Dey, Pankaj Kumar, and Sikata Samantaray, “A review of nanofluid preparation, stability, and thermo-physical properties,” Heat Transfer-Asian Research, 2017. View at Publisher · View at Google Scholar
  • Shoji Mori, and Yoshio Utaka, “Critical heat flux enhancement by surface modification in a saturated pool boiling: A review,” International Journal of Heat and Mass Transfer, vol. 108, pp. 2534–2557, 2017. View at Publisher · View at Google Scholar
  • Ahmad Amiri, Mehdi Shanbedi, and Hossein Dashti, “Thermophysical and rheological properties of water-based graphene quantum dots nanofluids,” Journal of the Taiwan Institute of Chemical Engineers, 2017. View at Publisher · View at Google Scholar
  • Ahmed M. Ibrahem, Mohamed F. El-Amin, and Shuyu Sun, “Effects of Nanoparticles on Melting Process with Phase-Change Using the Lattice Boltzmann Method,” Results in Physics, 2017. View at Publisher · View at Google Scholar
  • khosrojerdi, Lavasani, and Vakili, “Experimental study of photothermal specifications and stability of graphene oxide nanoplatelets nanofluid as working fluid for low-temperature Direct Absorption Solar Collectors (DASCs),” Solar Energy Materials and Solar Cells, vol. 164, pp. 32–39, 2017. View at Publisher · View at Google Scholar
  • Alina Adriana Minea, “Challenges in hybrid nanofluids behavior in turbulent flow: Recent research and numerical comparison,” Renewable and Sustainable Energy Reviews, vol. 71, pp. 426–434, 2017. View at Publisher · View at Google Scholar
  • Tahereh B. Gorji, and Ranjbar, “A review on optical properties and application of nanofluids in direct absorption solar collectors (DASCs),” Renewable and Sustainable Energy Reviews, vol. 72, pp. 10–32, 2017. View at Publisher · View at Google Scholar
  • Leilei Chen, Jian Liu, Chao Xu, Xiaoming Fang, and Zhengguo Zhang, “Optical absorption property and photo-thermal conversion performance of graphene oxide/water nanofluids with excellent dispersion stability,” Solar Energy, vol. 148, pp. 17–24, 2017. View at Publisher · View at Google Scholar
  • Wisut Chamsa-ard, Sridevi Brundavanam, Chun Fung, Derek Fawcett, and Gerrard Poinern, “Nanofluid Types, Their Synthesis, Properties and Incorporation in Direct Solar Thermal Collectors: A Review,” Nanomaterials, vol. 7, no. 6, pp. 131, 2017. View at Publisher · View at Google Scholar
  • Rajeev Nayan Gupta, and Harsha, “Synthesis, characterization, and Tribological studies of calcium-copper-Titanate Nanoparticles as a Biolubricant additive,” Journal of Tribology, vol. 139, no. 2, 2017. View at Publisher · View at Google Scholar
  • Vishal Saxena, Niraj Kumar, and Vinod.Kumar Saxena, “A comprehensive review on combustion and stability aspects of metal nanoparticles and its additive effect on diesel and biodiesel fuelled C.I. engine,” Renewable and Sustainable Energy Reviews, vol. 70, pp. 563–588, 2017. View at Publisher · View at Google Scholar
  • Leilei Chen, Zhengguo Zhang, Jian Liu, and Xiaoming Fang, “Reduced graphene oxide dispersed nanofluids with improved photo-thermal conversion performance for direct absorption solar collectors,” Solar Energy Materials and Solar Cells, vol. 163, pp. 125–133, 2017. View at Publisher · View at Google Scholar
  • Ramneek Kaur, Rashi Rajput, Payal Nag, Sachin Kumar, Rachana, and Manisha Singh, “Synthesis, characterization and evaluation of antioxidant properties of catechin hydrate nanoparticles,” Journal of Drug Delivery Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Redhwan, Azmi, Sharif, Mamat, and Zawawi, “Comparative study of thermo-physical properties of SiO2 and Al2O3 nanoparticles dispersed in PAG lubricant,” Applied Thermal Engineering, vol. 116, pp. 823–832, 2017. View at Publisher · View at Google Scholar
  • Sharshir, Guilong Peng, Kabeel, Lirong Wu, Essa, and Nuo Yang, “The effects of flake graphite nanoparticles, phase change material, and film cooling on the solar still performance,” Applied Energy, vol. 191, pp. 358–366, 2017. View at Publisher · View at Google Scholar
  • C. Paredes-Arroyo, and R. Guzmán, “Nonequilibrium molecular dynamics simulation of a dense confined nanofluid: Wall-nanoparticle interaction effects,” Computational Materials Science, vol. 131, pp. 11–20, 2017. View at Publisher · View at Google Scholar
  • Yanwei Hu, Haoran Li, Yurong He, Ziyu Liu, and Yunhua Zhao, “Effect of nanoparticle size and concentration on boiling performance of SiO2 nanofluid,” International Journal of Heat and Mass Transfer, vol. 107, pp. 820–828, 2017. View at Publisher · View at Google Scholar
  • Ha, Seo, Choi, and Kim, “Enhanced thermal conductivity of alumina nanoparticle suspensions by femtosecond laser irradiation,” International Journal of Heat and Mass Transfer, vol. 107, pp. 755–760, 2017. View at Publisher · View at Google Scholar
  • Nabil, Hamid, Zawawi, Azmi, Priyandoko, and Mamat, “Thermo-physical properties of hybrid nanofluids and hybrid nanolubricants: A comprehensive review on performance,” International Communications in Heat and Mass Transfer, vol. 83, pp. 30–39, 2017. View at Publisher · View at Google Scholar
  • Dong Li, Lioua Kolsi, Brundaban Sahoo, Ahmed Kadhim Hussein, and Sanatana Kata, “A Review of Nano Fluid Role to Improve the Performance of the Heat Pipe Solar Collectors,” Energy Procedia, vol. 109, pp. 417–424, 2017. View at Publisher · View at Google Scholar
  • Redhwan, Yusof, Sharif, Azmi, and Mamat, “Performance analysis of SiO2/PAG nanolubricant in automotive air conditioning system,” International Journal of Refrigeration, vol. 75, pp. 204–216, 2017. View at Publisher · View at Google Scholar
  • Ajay Kumar, Gananath D. Thakre, P. K. Arya, and A. K. Jain, “Influence of Operating Parameters on the Tribological Performance of Oleic Acid-Functionalized Cu Nanofluids,” Industrial & Engineering Chemistry Research, vol. 56, no. 13, pp. 3527–3541, 2017. View at Publisher · View at Google Scholar
  • W.H. Azmi, M.Z. Sharif, T.M. Yusof, Rizalman Mamat, and A.A.M. Redhwan, “Potential of nanorefrigerant and nanolubricant on energy saving in refrigeration system – A review,” Renewable and Sustainable Energy Reviews, vol. 69, pp. 415–428, 2017. View at Publisher · View at Google Scholar
  • S. Abdalla, Reem AL-Wafi, and A. Pizzi, “Stability and combustion of metal nano-particles and their additive impact with diesel and biodiesel on engine efficiency: A comprehensive study,” Journal of Renewable and Sustainable Energy, vol. 9, no. 2, pp. 022701, 2017. View at Publisher · View at Google Scholar
  • Ramesh Chand, Dhananjay Yadav, and Rana, “Thermal instability in a layer of couple stress nanofluid saturated porous medium,” Journal of Theoretical and Applied Mechanics (Bulgaria), vol. 47, no. 1, pp. 69–84, 2017. View at Publisher · View at Google Scholar
  • Chiam, Usri, Azmi, Rizalman Mamat, and Adam, “Thermal conductivity and viscosity of Al2O3 nanofluids for different based ratio of water and ethylene glycol mixture,” Experimental Thermal and Fluid Science, vol. 81, pp. 420–429, 2017. View at Publisher · View at Google Scholar
  • Usri, Rizalman Mamat, Sharma, Azmi, and Noor, “Force convection heat transfer of Al2O3 nanofluids for different based ratio of water: Ethylene glycol mixture,” Applied Thermal Engineering, vol. 112, pp. 707–719, 2017. View at Publisher · View at Google Scholar
  • Sharshir, Guilong Peng, Nuo Yang, Showgi I.T. Mohamed, Lirong Wu, Essa, Elsheikh, and Kabeel, “Enhancing the solar still performance using nanofluids and glass cover cooling: Experimental study,” Applied Thermal Engineering, vol. 113, pp. 684–693, 2017. View at Publisher · View at Google Scholar
  • Carlos Nieto de Castro, Xavier Paredes, Salomé Vieira, Sohel Murshed, Maria José Lourenço, and Fernando Santos, “IoNanofluids: Innovative Agents for Sustainable Development,” Nanotechnology for Energy Sustainability, pp. 911–936, 2017. View at Publisher · View at Google Scholar
  • Sobin Alosious, Krishnakumar, Sarath, and Anjan R Nair, “Experimental and numerical study on heat transfer enhancement of flat tube radiator using Al2O3 and CuO nanofluids,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, vol. 53, no. 12, pp. 3545–3563, 2017. View at Publisher · View at Google Scholar
  • Suhaib Umer Ilyas, Marneni Narahari, and Rajashekhar Pendyala, “An experimental study on the natural convection heat transfer in rectangular enclosure using functionalized alumina-thermal oil-based nanofluids,” Applied Thermal Engineering, vol. 127, pp. 765–775, 2017. View at Publisher · View at Google Scholar
  • Ramesh Chand, “Electro-thermal convection in a Brinkman porous medium saturated by nanofluid,” Ain Shams Engineering Journal, vol. 8, no. 4, pp. 633–641, 2017. View at Publisher · View at Google Scholar
  • Mohamed, Jinho Lee, Hyung Hee Cho, and Dhananjay Yadav, “Thermal convection in a Kuvshiniski viscoelastic nanofluid saturated porous layer,” Ain Shams Engineering Journal, vol. 8, no. 4, pp. 613–621, 2017. View at Publisher · View at Google Scholar
  • Francisco Júlio do Nascimento, Gherhardt Ribatski, and Tiago Augusto Moreira, “An investigation of the effect of nanoparticle composition and dimension on the heat transfer coefficient during flow boiling of aqueous nanofluids in small diameter channels (1.1 mm),” Experimental Thermal and Fluid Science, vol. 89, pp. 72–89, 2017. View at Publisher · View at Google Scholar
  • Ravi Shankar Kumar, and Tushar Sharma, “Stability and Rheological Properties of Nanofluids Stabilized by SiO 2 Nanoparticles and SiO 2 -TiO 2 Nanocomposites for Oilfield Applications,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2017. View at Publisher · View at Google Scholar
  • Muhammad Noor Afiq Witri Muhammad Yazid, Nor Azwadi Che Sidik, and Wira Jazair Yahya, “Heat and mass transfer characteristics of carbon nanotube nanofluids: A review,” Renewable and Sustainable Energy Reviews, vol. 80, pp. 914–941, 2017. View at Publisher · View at Google Scholar
  • Suleiman Akilu, Aklilu Tesfamichael Baheta, Mior Azman M.Said, Alina Adriana Minea, and K.V. Sharma, “Properties of glycerol and ethylene glycol mixture based SiO 2 -CuO/C hybrid nanofluid for enhanced solar energy transport,” Solar Energy Materials and Solar Cells, 2017. View at Publisher · View at Google Scholar
  • Siti Shafiah Shazali, Ahmad Amiri, Mohd Nashrul Mohd Zubir, Shaifulazuar Rozali, Mohd Zakuan Zabri, Mohd Faizul Mohd Sabri, and Mohammadreza Soleymaniha, “Investigation of the thermophysical properties and stability performance of non-covalently functionalized graphene nanoplatelets with Pluronic P-123 in different solvents,” Materials Chemistry and Physics, 2017. View at Publisher · View at Google Scholar
  • Hosein Rezvani, Ali Khalilnezhad, Parastoo Ganji, and Yousef Kazemzadeh, “How ZrO 2 nanoparticles improve the oil recovery by affecting the interfacial phenomena in the reservoir conditions?,” Journal of Molecular Liquids, 2017. View at Publisher · View at Google Scholar
  • Yanwei Hu, Ziyu Liu, and Yurong He, “Effects of SiO 2 nanoparticles on pool boiling heat transfer characteristics of water based nanofluids in a cylindrical vessel,” Powder Technology, 2017. View at Publisher · View at Google Scholar
  • Layth Al-Gebory, M. Pinar Mengüç, Ali Koşar, and Kürşat Şendur, “Effect of electrostatic stabilization on thermal radiation transfer in nanosuspensions: Photo-thermal energy conversion applications,” Renewable Energy, 2017. View at Publisher · View at Google Scholar
  • Rahman, Sahid, Kadirgama, and Maleque, “Experimental investigation on properties of hybrid nanofluids (TiO2 and ZnO) in water–ethylene glycol mixture,” Journal of Mechanical Engineering and Sciences, vol. 11, no. 4, pp. 3087–3094, 2017. View at Publisher · View at Google Scholar
  • S. F. M. Nor, N. Azis, J. Jasni, M. Z. A. Ab Kadir, R. Yunus, and Z. Yaakub, “Investigation on the electrical properties of palm oil and coconut oil based TiO2]]> nanofluids,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, no. 6, pp. 3432–3442, 2017. View at Publisher · View at Google Scholar
  • Nasser Sabet, Hassan Hassanzadeh, and Jalal Abedi, “Control of viscous fingering by nanoparticles,” Physical Review E, vol. 96, no. 6, 2017. View at Publisher · View at Google Scholar
  • A Melekhin, “The solution of private problems for optimization heat exchangers parameters,” Journal of Physics: Conference Series, vol. 891, pp. 012162, 2017. View at Publisher · View at Google Scholar
  • Wen-Kai Zhen, Zi-Zhen Lin, and Cong-Liang Huang, “Modified Maxwell model for predicting thermal conductivity of nanocomposites considering aggregation,” Chinese Physics B, vol. 26, no. 11, pp. 114401, 2017. View at Publisher · View at Google Scholar
  • Veerendra Dhyani, D. Sakthi Kumar, Saakshi Dhanekar, Priyanka Dwivedi, and Neha Chauhan, “Design, fabrication, characterization and packaging of bottom gate and nano-porous TiO2 based FET,” 2017 IEEE 17th International Conference on Nanotechnology, NANO 2017, pp. 946–950, 2017. View at Publisher · View at Google Scholar
  • Baranov, Shiryaev, Jin, and H. Ch. Bong, “ZnO Nanoparticle Modification by Polyethylenimine for Biomolecule Conjugation,” Nanotechnologies in Russia, vol. 12, no. 11-12, pp. 613–619, 2017. View at Publisher · View at Google Scholar
  • Moghiman, and Shams, “An experimental investigation of ignition probability of diesel fuel droplets with metal oxide nanoparticles,” Thermochimica Acta, vol. 657, pp. 79–85, 2017. View at Publisher · View at Google Scholar
  • Atul Bhattad, Jahar Sarkar, and Pradyumna Ghosh, “Improving the performance of refrigeration systems by using nanofluids: A comprehensive review,” Renewable and Sustainable Energy Reviews, 2017. View at Publisher · View at Google Scholar
  • A.H. Elsheikh, S.W. Sharshir, Mohamed E. Mostafa, F.A. Essa, and Mohamed Kamal Ahmed Ali, “Applications of nanofluids in solar energy: A review of recent advances,” Renewable and Sustainable Energy Reviews, 2017. View at Publisher · View at Google Scholar
  • You Wei, and Tayfun Babadagli, “Alteration of Interfacial Properties by Chemicals and Nanomaterials To Improve Heavy Oil Recovery at Elevated Temperatures,” Energy & Fuels, 2017. View at Publisher · View at Google Scholar
  • Moloud Nourani, Nasser Hamdami, and Javad Keramat, “Preparation and evaluation of a stable nanoalumina-paraffin composite: Melting rate investigation using image analysis,” Journal of Dispersion Science and Technology, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Anil Kumar, Sudarsan Ghosh, and Aravindan, “Grinding performance improvement of silicon nitride ceramics by utilizing nanofluids,” Ceramics International, vol. 43, no. 16, pp. 13411–13421, 2017. View at Publisher · View at Google Scholar
  • Suleiman Akilu, Aklilu Tesfamichael Baheta, Alina Adriana Minea, and K.V. Sharma, “Rheology and thermal conductivity of non-porous silica (SiO 2 ) in viscous glycerol and ethylene glycol based nanofluids,” International Communications in Heat and Mass Transfer, vol. 88, pp. 245–253, 2017. View at Publisher · View at Google Scholar
  • Swee Pin Yeap, JitKang Lim, Boon Seng Ooi, and Abdul Latif Ahmad, “Agglomeration, colloidal stability, and magnetic separation of magnetic nanoparticles: collective influences on environmental engineering applications,” Journal of Nanoparticle Research, vol. 19, no. 11, 2017. View at Publisher · View at Google Scholar
  • Siti Shafiah Shazali, Ahmad Amiri, Mohd Nashrul Mohd Zubir, Shaifulazuar Rozali, Mohd Zakuan Zabri, and Mohd Faizul Mohd Sabri, “Colloidal stability measurements of graphene nanoplatelets covalently functionalized with tetrahydrofurfuryl polyethylene glycol in different organic solvents,” Current Applied Physics, 2017. View at Publisher · View at Google Scholar
  • Robison Buitrago-Sierra, Farid Chejne, Elizabeth Pabón, Karen Cacua, and Bernardo Herrera, “Influence of different parameters and their coupled effects on the stability of alumina nanofluids by a fractional factorial design approach,” Advanced Powder Technology, vol. 28, no. 10, pp. 2581–2588, 2017. View at Publisher · View at Google Scholar
  • Guodong Xia, Mo Du, Lixin Cheng, and Wei Wang, “Experimental study on the nucleate boiling heat transfer characteristics of a water-based multi-walled carbon nanotubes nanofluid in a confined space,” International Journal of Heat and Mass Transfer, vol. 113, pp. 59–69, 2017. View at Publisher · View at Google Scholar
  • Saeed Askari, Hadis Koolivand, Mahnaz Pourkhalil, Roghayyeh Lotfi, and Alimorad Rashidi, “Investigation of Fe3O4/Graphene nanohybrid heat transfer properties: Experimental approach,” International Communications in Heat and Mass Transfer, vol. 87, pp. 30–39, 2017. View at Publisher · View at Google Scholar
  • Anselmo Elcana De Oliveira, Maykon Alves Lemes, and Denilson Rabelo, “A novel method to evaluate nanofluid stability using multivariate image analysis,” Analytical Methods, vol. 9, no. 39, pp. 5826–5833, 2017. View at Publisher · View at Google Scholar
  • Naveenkumar Rajendhran, Siva Palanisamy, Prabu Periyasamy, and Rajendran Venkatachalam, “Enhancing of the tribological characteristics of the lubricant oils using Ni-promoted MoS 2 nanosheets as nano-additives,” Tribology International, 2017. View at Publisher · View at Google Scholar
  • Lezorgia N. Nwidee, Maxim Lebedev, Ahmed Barifcani, Mohammad Sarmadivaleh, and Stefan Iglauer, “Wettability alteration of oil-wet limestone using surfactant-nanoparticle formulation,” Journal of Colloid and Interface Science, vol. 504, pp. 334–345, 2017. View at Publisher · View at Google Scholar
  • Z. Baniamerian, M. Mashayekhi, and R. Mehdipour, “Evaporative Behavior of Gold-Based Hybrid Nanofluids,” Journal of Thermophysics and Heat Transfer, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Laura Peña-Parás, José Sánchez-Fernández, Carlos Martínez, José Ontiveros, Karla Saldívar, Luis Urbina, Moisés Arias, Patricio García-Pineda, and Brenda Castaños, “Evaluation of Anti-Wear Properties of Metalworking Fluids Enhanced with Halloysite Nanotubes,” Applied Sciences, vol. 7, no. 10, pp. 1019, 2017. View at Publisher · View at Google Scholar
  • Ramesh Chandpp. 1–229, 2017. View at Publisher · View at Google Scholar
  • Gananath D. Thakre, Konathala, Saran, Jain, Ajay Kumar, Arya, and Raghuvir Singh, “Experimental study on the efficacy of MoS2 microfluids for improved tribological performance,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, no. 1, pp. 107–124, 2017. View at Publisher · View at Google Scholar
  • Blake J. Bleier, Benjamin A. Yezer, Ben J. Freireich, Shelley L. Anna, and Lynn M. Walker, “Droplet-Based Characterization of Surfactant Efficacy in Colloidal Stabilization of Carbon Black in Nonpolar Solvents,” Journal of Colloid and Interface Science, 2017. View at Publisher · View at Google Scholar
  • Ali Akbar Alemrajabi, Amin Rezaei, and Amir Menbari, “Experimental investigation of thermal performance for direct absorption solar parabolic trough collector (DASPTC) based on binary nanofluids,” Experimental Thermal and Fluid Science, vol. 80, pp. 218–227, 2017. View at Publisher · View at Google Scholar
  • Elaheh Esmaeili, Reza Ghazanfar Chaydareh, and Seyyed Amin Rounaghi, “The influence of the alternating magnetic field on the convective heat transfer properties of Fe3O4-containing nanofluids through the Neel and Brownian mechanisms,” Applied Thermal Engineering, vol. 110, pp. 1212–1219, 2017. View at Publisher · View at Google Scholar
  • Suhaib Umer Ilyas, Rajashekhar Pendyala, and Narahari Marneni, “Stability of Nanofluids,” Engineering Applications of Nanotechnology, pp. 1–31, 2017. View at Publisher · View at Google Scholar
  • Henning Wiggerpp. 1–257, 2017. View at Publisher · View at Google Scholar
  • Dongmin Kim, Yong Tae Kang, and Israel Torres Pineda, “Mass transfer analysis for CO2 bubble absorption in methanol/Al2O3 nanoabsorbents,” International Journal of Heat and Mass Transfer, vol. 114, pp. 1295–1303, 2017. View at Publisher · View at Google Scholar
  • Nor Azwadi Che Sidik, Tan Lit Ken, Rizalman Mamat, Muhammad Hafiz Hamzah, and Najafi, “Factors affecting the performance of hybrid nanofluids: A comprehensive review,” International Journal of Heat and Mass Transfer, vol. 115, pp. 630–646, 2017. View at Publisher · View at Google Scholar
  • Anielle Christine Almeida Silva, Letícia Raquel Oliveira, Noelio Oliveira Dantas, and Enio P. Bandarra Filho, “Thermophysical properties of TiO2-PVA/water nanofluids,” International Journal of Heat and Mass Transfer, vol. 115, pp. 795–808, 2017. View at Publisher · View at Google Scholar
  • Narendar, A.V.S.S Kumara Swami Gupta, Krishnaiah, and Satyanarayana, “Experimental investigation on the preparation and applications of Nano fluids,” Materials Today: Proceedings, vol. 4, no. 2, pp. 3926–3931, 2017. View at Publisher · View at Google Scholar
  • Veeresh Fuskele, and Sarviya, “Recent developments in Nanoparticles Synthesis, Preparation and Stability of Nanofluids,” Materials Today: Proceedings, vol. 4, no. 2, pp. 4049–4060, 2017. View at Publisher · View at Google Scholar
  • Zoubair Boulahia, Rachid Sehaqui, and Abderrahim Wakif, “Numerical analysis of the onset of longitudinal convective rolls in a porous medium saturated by an electrically conducting nanofluid in the presence of an external magnetic field,” Results in Physics, vol. 7, pp. 2134–2152, 2017. View at Publisher · View at Google Scholar
  • Ashfaq Ahmed, and Sohail Nadeem, “Effects of magnetohydrodynamics and hybrid nanoparticles on a micropolar fluid with 6-types of stenosis,” Results in Physics, vol. 7, pp. 4130–4139, 2017. View at Publisher · View at Google Scholar
  • Joaquín Martín-Calleja, Elisa I. Martín, Juan Jesús Gallardo, Desiré De Los Santos, Rodrigo Alcántara, Roberto Gómez-Villarejo, Javier Navas, Antonio Sánchez-Coronilla, Teresa Aguilar, and Concha Fernández-Lorenzo, “Preparation of Au nanoparticles in a non-polar medium: Obtaining high-efficiency nanofluids for concentrating solar power. An experimental and theoretical perspective,” Journal of Materials Chemistry A, vol. 5, no. 24, pp. 12483–12497, 2017. View at Publisher · View at Google Scholar
  • Linghui Kong, Jianlin Sun, and Yueyue Bao, “Preparation, characterization and tribological mechanism of nanofluids,” RSC Advances, vol. 7, no. 21, pp. 12599–12609, 2017. View at Publisher · View at Google Scholar
  • Safian Sharif, Ibrahim Ogu Sadiq, Noordin Mohd Yusof, and Amrifan Saladin Mohruni, “A review of minimum quantity lubrication technique with nanofluids application in metal cutting operations,” International Journal on Advanced Science, Engineering and Information Technology, vol. 7, no. 2, pp. 587–593, 2017. View at Publisher · View at Google Scholar
  • Rana, Ramesh Chand, and Dhananjay Yadav, “Thermal instability of couple-stress nano fluid with vertical rotation in a porous medium,” Journal of Porous Media, vol. 20, no. 7, pp. 635–648, 2017. View at Publisher · View at Google Scholar
  • Chitra, and Sendhilnathan, “Thermal studies of nanofluids related to their applications,” Heat Transfer Research, vol. 48, no. 6, pp. 499–528, 2017. View at Publisher · View at Google Scholar
  • R. T. Arun Ram Prasath, Nirmal Kumar Roy, Sankar Narayan Mahato, and P. Thomas, “Mineral oil based high permittivity CaCu3Ti4O12 (CCTO) nanofluids for power transformer application,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, no. 4, pp. 2344–2353, 2017. View at Publisher · View at Google Scholar
  • Debjyoti Banerjee, and Binjian Ma, “Predicting particle size distribution in nanofluid synthesis,” ASME 2017 Heat Transfer Summer Conference, HT 2017, vol. 2, 2017. View at Publisher · View at Google Scholar
  • Aditya Kuchibhotla, and Debjyoti Banerjee, “Forced convection heat transfer of nanofluids: A review,” ASME 2017 Heat Transfer Summer Conference, HT 2017, vol. 2, 2017. View at Publisher · View at Google Scholar
  • Ankita Srivastava, Arinjay Kumar, Sharma, Babita Sharma, and Shipra Mital Gupta, “Combined effect of surface treatment and surfactant on cnt nanofluids preparation,” Proceedings of the World Congress on New Technologies, 2017. View at Publisher · View at Google Scholar
  • Prabhu Das Nelaturi, Nandhini Huthur Sriramaia, Venkata Subbaiah Kotakadi, Kiranmayee Pamidimukkala, Sudeep Nagaraj, and Ambalath Veetil Veeran Moideen Kutty, “An in-vitro cytotoxic and genotoxic properties of Allamanda Cathartica L. Latex Green NPs on human peripheral blood mononuclear cells,” Nano Biomedicine and Engineering, vol. 9, no. 4, pp. 314–323, 2017. View at Publisher · View at Google Scholar
  • S. Ravi Babu, and G. Sambasiva Rao, “Buoyancy-induced natural convective heat transfer along a vertical cylinder using Water-Al2O3 nanofluids,” Journal of Thermal Science and Engineering Applications, vol. 10, no. 3, 2018. View at Publisher · View at Google Scholar
  • Gangtao Liang, and Issam Mudawar, “Review of pool boiling enhancement with additives and nanofluids,” International Journal of Heat and Mass Transfer, vol. 124, pp. 423–453, 2018. View at Publisher · View at Google Scholar
  • A. Tomala, M. Rodríguez Ripoll, J. Kogovšek, M. Kalin, A. Bednarska, R. Michalczewski, and M. Szczerek, “Synergisms and antagonisms between MoS 2 nanotubes and representative oil additives under various contact conditions,” Tribology International, 2018. View at Publisher · View at Google Scholar
  • José Jaime Taha-Tijerina, “Thermal Transport and Challenges on Nanofluids Performance,” Microfluidics and Nanofluidics, 2018. View at Publisher · View at Google Scholar
  • Shangzhen Xie, Mehrdad Shahmohammadi Beni, Jiejin Cai, and Jiyun Zhao, “Review of critical-heat-flux enhancement methods,” International Journal of Heat and Mass Transfer, vol. 122, pp. 275–289, 2018. View at Publisher · View at Google Scholar
  • N. Gobinath, T. Venugopal, Karthikeyan Palani, and Anand A. Samuel, “Numerical modelling of thermophoresis in water-alumina nanofluid under pool boiling conditions,” International Journal of Thermal Sciences, vol. 129, pp. 1–13, 2018. View at Publisher · View at Google Scholar
  • Naser Ali, Joao A. Teixeira, and Abdulmajid Addali, “A Review on Nanofluids: Fabrication, Stability, and Thermophysical Properties,” Journal of Nanomaterials, vol. 2018, pp. 1–33, 2018. View at Publisher · View at Google Scholar
  • Santosh Dhakal, Sankar Renu, Shristi Ghimire, Yashavanth Shaan Lakshmanappa, Bradley T. Hogshead, Ninoshkaly Feliciano-Ruiz, Fangjia Lu, Harm HogenEsch, Steven Krakowka, Chang Won Lee, and Gourapura J. Renukaradhya, “Mucosal Immunity and Protective Efficacy of Intranasal Inactivated Influenza Vaccine Is Improved by Chitosan Nanoparticle Delivery in Pigs,” Frontiers in Immunology, vol. 9, 2018. View at Publisher · View at Google Scholar
  • Muhammad Saeed, and Man-Hoe Kim, “Heat transfer enhancement using nanofluids (Al2O3-H2O) in mini-channel heatsinks,” International Journal of Heat and Mass Transfer, vol. 120, pp. 671–682, 2018. View at Publisher · View at Google Scholar
  • Bastián Águila V, Paula Galvez P, Diego A. Vasco, and Paula A. Zapata, “Effect of temperature and CuO-nanoparticle concentration on the thermal conductivity and viscosity of an organic phase-change material,” International Journal of Heat and Mass Transfer, vol. 120, pp. 1009–1019, 2018. View at Publisher · View at Google Scholar
  • Danial Arab, Apostolos Kantzas, and Steven L. Bryant, “Nanoparticle stabilized oil in water emulsions: A critical review,” Journal of Petroleum Science and Engineering, vol. 163, pp. 217–242, 2018. View at Publisher · View at Google Scholar
  • Rahul Saha, Ramgopal V. S. Uppaluri, and Pankaj Tiwari, “Silica Nanoparticle Assisted Polymer Flooding of Heavy Crude Oil: Emulsification, Rheology, and Wettability Alteration Characteristics,” Industrial & Engineering Chemistry Research, 2018. View at Publisher · View at Google Scholar
  • Jatinder Gill, Jagdev Singh, Olayinka S. Ohunakin, and Damola S. Adelekan, “Energy analysis of a domestic refrigerator system with ANN using LPG/TiO2–lubricant as replacement for R134a,” Journal of Thermal Analysis and Calorimetry, 2018. View at Publisher · View at Google Scholar
  • Nithyanandam, and Palanisamy, “Wettability analysis on copper substrate by emery abrasion and copper nano coating,” International Journal of Mechanical and Production Engineering Research and Development, vol. 8, no. 2, pp. 583–590, 2018. View at Publisher · View at Google Scholar
  • Mehrdad Karimzadehkhouei, Mostafa Shojaeian, Abdolali Sadaghiani, Kürşat Şendur, M. Mengüç, and Ali Koşar, “Entropy Generation Analysis of Laminar Flows of Water-Based Nanofluids in Horizontal Minitubes under Constant Heat Flux Conditions,” Entropy, vol. 20, no. 4, pp. 242, 2018. View at Publisher · View at Google Scholar
  • Lezorgia Nekabari Nwidee, Ahmed Barifcani, Mohammad Sarmadivaleh, and Stefan Iglauer, “Nanofluids as Novel Alternative Smart Fluids for Reservoir Wettability Alteration,” Novel Nanomaterials - Synthesis and Applications, 2018. View at Publisher · View at Google Scholar
  • Siti Shafiah Shazali, Ahmad Amiri, Mohd. Nashrul Mohd Zubir, Shaifulazuar Rozali, Mohd Zakuan Zabri, and Mohd Faizul Mohd Sabri, “Facile hydrothermal method for synthesizing nitrogen-doped graphene nanoplatelets using aqueous ammonia: dispersion, stability in solvents and thermophysical performances,” Materials Research Express, vol. 5, no. 3, pp. 035042, 2018. View at Publisher · View at Google Scholar
  • B. M. Paramashivaiah, N. R. Banapurmath, C. R. Rajashekhar, and S. V. Khandal, “Studies on Effect of Graphene Nanoparticles Addition in Different Levels with Simarouba Biodiesel and Diesel Blends on Performance, Combustion and Emission Characteristics of CI Engine,” Arabian Journal for Science and Engineering, 2018. View at Publisher · View at Google Scholar
  • Omid Mahian, Saman Rashidi, and Ehsan Mohseni Languri, “Applications of nanofluids in condensing and evaporating systems: A review,” Journal of Thermal Analysis and Calorimetry, vol. 131, no. 3, pp. 2027–2039, 2018. View at Publisher · View at Google Scholar
  • Kumaresan, and Kamatchi, “Investigations on pool boiling critical heat flux, transient characteristics and bonding strength of heater wire with aqua based reduced graphene oxide nanofluids,” Chinese Journal of Chemical Engineering, vol. 26, no. 3, pp. 445–454, 2018. View at Publisher · View at Google Scholar
  • Ahmad Suhail bin Sudirman, and Alhassan Salami Tijani, “Thermos-physical properties and heat transfer characteristics of water/anti-freezing and Al2O3/CuO based nanofluid as a coolant for car radiator,” International Journal of Heat and Mass Transfer, vol. 118, pp. 48–57, 2018. View at Publisher · View at Google Scholar
  • Naru Maruoka, Shoji Mori, and Kunito Okuyama, “Critical heat flux enhancement by a two-layer structured honeycomb porous plate in a saturated pool boiling of water,” International Journal of Heat and Mass Transfer, vol. 118, pp. 429–438, 2018. View at Publisher · View at Google Scholar
  • Siti Shafiah Shazali, Shaifulazuar Rozali, Ahmad Amiri, Mohd Nashrul Mohd Zubir, Mohd Faizul Mohd Sabri, and Mohd Zakuan Zabri, “Evaluation on stability and thermophysical performances of covalently functionalized graphene nanoplatelets with xylitol and citric acid,” Materials Chemistry and Physics, 2018. View at Publisher · View at Google Scholar
  • Wenzhen Xia, Jingwei Zhao, Hui Wu, Sihai Jiao, Xianming Zhao, Xiaoming Zhang, Jianzhong Xu, and Zhengyi Jiang, “Analysis of oil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles,” Wear, vol. 396-397, pp. 162–171, 2018. View at Publisher · View at Google Scholar
  • Md. Parvez Islam, and Tetsuo Morimoto, “Advances in low to medium temperature non-concentrating solar thermal technology,” Renewable and Sustainable Energy Reviews, vol. 82, pp. 2066–2093, 2018. View at Publisher · View at Google Scholar
  • Javier Nieto-Maestre, Iñigo Iparraguirre-Torres, Jose M. Sala-Lizarraga, Belén Muñoz-Sánchez, and Ana García-Romero, “Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature,” Renewable and Sustainable Energy Reviews, vol. 82, pp. 3924–3945, 2018. View at Publisher · View at Google Scholar
  • Elena Piacenza, Alessandro Presentato, and Raymond J. Turner, “Stability of biogenic metal(loid) nanomaterials related to the colloidal stabilization theory of chemical nanostructures,” Critical Reviews in Biotechnology, pp. 1–20, 2018. View at Publisher · View at Google Scholar
  • Yu Fang, JiaLuo Li, Tatsuo Togo, FangYing Jin, ZhiFeng Xiao, LuJia Liu, Hannah Drake, XiZhen Lian, and Hong-Cai Zhou, “Ultra-Small Face-Centered-Cubic Ru Nanoparticles Confined within a Porous Coordination Cage for Dehydrogenation,” Chem, 2018. View at Publisher · View at Google Scholar
  • Rajeev Nayan Gupta, A. P. Harsha, and Sagar Singh, “Tribological study on rapeseed oil with nano-additives in close contact sliding situation,” Applied Nanoscience, 2018. View at Publisher · View at Google Scholar
  • Kamatchi, “Experimental investigations on nucleate boiling heat transfer of aqua based reduced graphene oxide nanofluids,” Heat and Mass Transfer/Waerme- und Stoffuebertragung, vol. 54, no. 2, pp. 437–451, 2018. View at Publisher · View at Google Scholar
  • Shams, and Moghiman, “Effect of metal oxide nanoparticles on the ignition characteristics of diesel fuel droplets: an experimental study,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 2, 2018. View at Publisher · View at Google Scholar
  • Teresa Aguilar, Javier Navas, Antonio Sánchez-Coronilla, Elisa I. Martín, Juan Jesús Gallardo, Paloma Martínez-Merino, Roberto Gómez-Villarejo, José Carlos Piñero, Rodrigo Alcántara, and Concha Fernández-Lorenzo, “Investigation of enhanced thermal properties in NiO-based nanofluids for concentrating solar power applications: A molecular dynamics and experimental analysis,” Applied Energy, vol. 211, pp. 677–688, 2018. View at Publisher · View at Google Scholar
  • Thien-Binh Nguyen, Tuan Tran, Md Imrul Kayes, Baomin Wang, Paul W. Leu, Dongdong Liu, and Nabeel Rashin, “Critical heat flux enhancement in pool boiling through increased rewetting on nanopillar array surfaces,” Scientific Reports, vol. 8, no. 1, 2018. View at Publisher · View at Google Scholar
  • Roberto Gómez-Villarejo, Elisa I. Martín, Antonio Sánchez-Coronilla, Teresa Aguilar, Juan Jesús Gallardo, Paloma Martínez-Merino, Iván Carrillo-Berdugo, Rodrigo Alcántara, Concha Fernández-Lorenzo, and Javier Navas, “Towards the improvement of the global efficiency of concentrating solar power plants by using Pt-based nanofluids: The internal molecular structure effect,” Applied Energy, vol. 228, pp. 2262–2274, 2018. View at Publisher · View at Google Scholar
  • Teresa Aguilar, Ivan Carrillo-Berdugo, Roberto Gómez-Villarejo, Juan Gallardo, Paloma Martínez-Merino, José Piñero, Rodrigo Alcántara, Concha Fernández-Lorenzo, and Javier Navas, “A Solvothermal Synthesis of TiO2 Nanoparticles in a Non-Polar Medium to Prepare Highly Stable Nanofluids with Improved Thermal Properties,” Nanomaterials, vol. 8, no. 10, pp. 816, 2018. View at Publisher · View at Google Scholar
  • Tannaz Pak, Nathaly Lopes Archilha, and Raaid Al-Imari, “Application of nanotechnology in removal of NAPLs from contaminated aquifers: a source clean-up experimental study,” Clean Technologies and Environmental Policy, 2018. View at Publisher · View at Google Scholar
  • Milorad M. Kuraica, Predrag Iskrenović, Marko Perić, Ivan Krstić, and Aleksandar S. Nikolić, “External magnetic field influence on magnetite and cobalt-ferrite nano-particles in ferrofluid,” Chemical Papers, 2018. View at Publisher · View at Google Scholar
  • Kalska-Szostko, Klekotka, Satuła, and Spassov, “Surfactant dependence on physicochemical properties of magnetite nanoparticles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 537, pp. 452–459, 2018. View at Publisher · View at Google Scholar
  • K. Abdul Hamid, Azmi, Sharma, Nabil, and Rizalman Mamat, “Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids,” International Journal of Heat and Mass Transfer, vol. 116, pp. 1143–1152, 2018. View at Publisher · View at Google Scholar
  • Kin Yuen Leong, Ku Ahmad, Mohd Rosdzimin Abdul Rahman, Idayu Razali, Hwai Chyuan Ong, and Ghazali, “Thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: An experimental approach,” International Communications in Heat and Mass Transfer, vol. 90, pp. 23–28, 2018. View at Publisher · View at Google Scholar
  • Wani Khalid Shafi, Ankush Raina, and Mir Irfan Ul Haq, “Friction and wear characteristics of vegetable oils using nanoparticles for sustainable lubrication,” Tribology - Materials, Surfaces and Interfaces, vol. 12, no. 1, pp. 27–43, 2018. View at Publisher · View at Google Scholar
  • Dhinesh Kumar, and Valan Arasu, “A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids,” Renewable and Sustainable Energy Reviews, vol. 81, pp. 1669–1689, 2018. View at Publisher · View at Google Scholar
  • Javad Saien, and Sajjad Hashemi, “Long chain imidazolium ionic liquid and magnetite nanoparticle interactions at the oil/water interface,” Journal of Petroleum Science and Engineering, vol. 160, pp. 363–371, 2018. View at Publisher · View at Google Scholar
  • Mahesh Kumar Sharma, and Amit Mahajan, “Convection in a magnetic nanofluid saturating a porous medium under the influence of a variable gravity field,” Engineering Science and Technology, an International Journal, 2018. View at Publisher · View at Google Scholar
  • Manoj Ukamanal, Purna Chandra Mishra, and Ashok Kumar Sahoo, “Temperature distribution during AISI 316 steel turning under TiO2-water based nanofluid spray environments,” Materials Today: Proceedings, vol. 5, no. 9, pp. 20741–20749, 2018. View at Publisher · View at Google Scholar
  • Rukmini Srikant Revuru, Vamsi Krishna Pasam, Ismail Syed, and Uday Kumar Paliwal, “Development of finite element based model for performance evaluation of nano cutting fluids in minimum quantity lubrication,” CIRP Journal of Manufacturing Science and Technology, 2018. View at Publisher · View at Google Scholar
  • H. Alhummiany, “ Novel Nanofluid Based on Water-Loaded Delafossite CuAlO 2 Nanowires: Structural and Thermal Properties ,” Journal of Nanomaterials, vol. 2018, pp. 1–6, 2018. View at Publisher · View at Google Scholar
  • I.M. Mahbubul, “Introduction to Nanofluid,” Preparation, Characterization, Properties and Application of Nanofluid, pp. 1–13, 2019. View at Publisher · View at Google Scholar