Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2012, Article ID 760401, 14 pages
http://dx.doi.org/10.1155/2012/760401
Research Article

Morphological Study on Room-Temperature-Cured PMMA-Grafted Natural Rubber-Toughened Epoxy/Layered Silicate Nanocomposite

1Department of Chemical and Process Engineering, Universiti Kebangsaan Malaysia, 43000 Selangor, Bangi, Malaysia
2Department of Material Science, Universiti Kebangsaan Malaysia, 43000 Selangor, Bangi, Malaysia
3Department of Chemical Engineering, McGill University, M. H. Wong Building, 3610 University Street, Montreal, QC, Canada H3A 2B2
4Department of Polymer Engineering, University of Akron, Akron, OH 44325-0301, USA
5Crop Improvement and Protection Unit, Rubber Research Institute Experimental Station, 47000 Sungai Selangor, Buloh, Malaysia

Received 6 April 2012; Revised 6 June 2012; Accepted 6 June 2012

Academic Editor: Kin Tak Lau

Copyright © 2012 N. Y. Yuhana et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

N. Y. Yuhana, S. Ahmad, M. R. Kamal, S. C. Jana, and A. R. Shamsul Bahri, “Morphological Study on Room-Temperature-Cured PMMA-Grafted Natural Rubber-Toughened Epoxy/Layered Silicate Nanocomposite,” Journal of Nanomaterials, vol. 2012, Article ID 760401, 14 pages, 2012. https://doi.org/10.1155/2012/760401.