Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 275946, 6 pages
http://dx.doi.org/10.1155/2013/275946
Research Article

3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets

1Department of Mechanical and Electromechanical Engineering, National Sun Yat-Sen University, Kaohsiung 804, Taiwan
2Department of Biological Science and Technology, I-Shou University, Kaohsiung 824, Taiwan

Received 10 September 2013; Accepted 5 October 2013

Academic Editor: Liang-Wen Ji

Copyright © 2013 Che-Hsin Lin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Che-Hsin Lin, Chun-Hung Lan, and Chih-Hui Yang, “3-Dimensional Microorifice Fabricated Utilizing Single Undercut Etching Process for Producing Ultrasmall Water and Chitosan Droplets,” Journal of Nanomaterials, vol. 2013, Article ID 275946, 6 pages, 2013. https://doi.org/10.1155/2013/275946.