Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013 (2013), Article ID 319437, 8 pages
http://dx.doi.org/10.1155/2013/319437
Research Article

TiO2 Deposition on AZ31 Magnesium Alloy Using Plasma Electrolytic Oxidation

1Engineering Research Center (ERC), Mechanical Engineering, Department of Chemical, Biological, and Bio Engineering, North Carolina A & T State University, Greensboro, NC 27406, USA
2Engineering Research Center for Revolutionizing Metallic Biomaterials (ERC-RMB), North Carolina A & T State University, 1601 E. Market Street, IRC Room 119, Greensboro, NC 27411, USA

Received 12 June 2013; Revised 26 November 2013; Accepted 2 December 2013

Academic Editor: Wenhong Fan

Copyright © 2013 Leon White et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. L. Mordike and T. Ebert, “Magnesium: properties—applications—potential,” Materials Science and Engineering A, vol. 302, no. 1, pp. 37–45, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. Zhang, C. Yan, F. Wang, H. Lou, and C. Cao, “Study on the environmentally friendly anodizing of AZ91D magnesium alloy,” Surface and Coatings Technology, vol. 161, no. 1, pp. 36–43, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. E. F. Emley, Principles of Magnesium Technology, Pergamon Press, Oxford, UK, 1966.
  4. G. Song, A. Atrens, D. St. John, X. Wu, and J. Nairn, “The anodic dissolution of magnesium in chloride and sulphate solutions,” Corrosion Science, vol. 39, no. 10-11, pp. 1981–2004, 1997. View at Google Scholar · View at Scopus
  5. R.-C. Zeng, J. Zhang, W. J. Huang et al., “Review of studies on corrosion of magnesium alloys,” Transactions of Nonferrous Metals Society of China, vol. 16, supplement 2, pp. s763–s771, 2006. View at Publisher · View at Google Scholar
  6. G. Song, “Recent progress in corrosion and protection of magnesium alloys,” Advanced Engineering Materials, vol. 7, no. 7, pp. 563–586, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Arrabal, E. Matykina, T. Hashimoto, P. Skeldon, and G. E. Thompson, “Characterization of AC PEO coatings on magnesium alloys,” Surface and Coatings Technology, vol. 203, no. 16, pp. 2207–2220, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. J. E. Gray and B. Luan, “Protective coatings on magnesium and its alloys—a critical review,” Journal of Alloys and Compounds, vol. 336, no. 1-2, pp. 88–113, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Liu, H. Bai, Y. Wang, Z. Liu, X. Zhang, and D. D. Sun, “Self-assembling TiO2 nanorods on large graphene oxide sheets at a two-phase interface and their anti-recombination in photocatalytic applications,” Advanced Functional Materials, vol. 20, no. 23, pp. 4175–4181, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. L. Armelao, D. Barreca, G. Bottaro et al., “Photocatalytic and antibacterial activity of TiO2 and Au/TiO2 nanosystems,” Nanotechnology, vol. 18, no. 37, Article ID 375709, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. M. R. Hoffmann, S. T. Martin, W. Choi, and D. W. Bahnemann, “Environmental applications of semiconductor photocatalysis,” Chemical Reviews, vol. 95, no. 1, pp. 69–96, 1995. View at Google Scholar · View at Scopus
  12. D. Xue, Y. Yun, M. J. Schulz, and V. Shanov, “Corrosion protection of biodegradable magnesium implants using anodization,” Materials Science and Engineering C, vol. 31, no. 2, pp. 215–223, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. R. O. Hussein, D. O. Northwood, and X. Nie, “Coating growth behavior during the plasma electrolytic oxidation process,” Journal of Vacuum Science & Technology A, vol. 28, no. 4, pp. 766–773, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. R. O. Hussein, P. Zhang, X. Nie, Y. Xia, and D. O. Northwood, “The effect of current mode and discharge type on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloy AJ62,” Surface and Coatings Technology, vol. 206, no. 7, pp. 1990–1997, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Chang, “Growth regularity of ceramic coating on magnesium alloy by plasma electrolytic oxidation,” Journal of Alloys and Compounds, vol. 468, no. 1-2, pp. 462–465, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. A. L. Yerokhin, L. O. Snizhko, N. L. Gurevina, A. Leyland, A. Pilkington, and A. Matthews, “Discharge characterization in plasma electrolytic oxidation of aluminium,” Journal of Physics D, vol. 36, no. 17, pp. 2110–2120, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. A. L. Yerokhin, A. Shatrov, V. Samsonov et al., “Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process,” Surface and Coatings Technology, vol. 199, no. 2-3, pp. 150–157, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. J. A. Curran and T. W. Clyne, “Porosity in plasma electrolytic oxide coatings,” Acta Materialia, vol. 54, no. 7, pp. 1985–1993, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. J. A. Curran and T. W. Clyne, “Thermo-physical properties of plasma electrolytic oxide coatings on aluminium,” Surface and Coatings Technology, vol. 199, no. 2-3, pp. 168–176, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Arrabal, E. Matykina, F. Viejo, P. Skeldon, and G. E. Thompson, “Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings,” Corrosion Science, vol. 50, no. 6, pp. 1744–1752, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Bala Srinivasan, J. Liang, R. G. Balajeee, C. Blawert, M. Störmer, and W. Dietzel, “Effect of pulse frequency on the microstructure, phase composition and corrosion performance of a phosphate-based plasma electrolytic oxidation coated AM50 magnesium alloy,” Applied Surface Science, vol. 256, no. 12, pp. 3928–3935, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Yagi, A. Sengoku, K. Kubota, and E. Matsubara, “Surface modification of ACM522 magnesium alloy by plasma electrolytic oxidation in phosphate electrolyte,” Corrosion Science, vol. 57, pp. 74–80, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Wang, Q. Cai, B. Wei, and Y. Yan, “Analyses of microarc oxidation coating formed on AZ91D alloy in phosphate electrolytes,” Journal Wuhan University of Technology-Materials Science, vol. 22, no. 2, pp. 229–233, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Liang, L. Hu, and J. Hao, “Characterization of microarc oxidation coatings formed on AM60B magnesium alloy in silicate and phosphate electrolytes,” Applied Surface Science, vol. 253, no. 10, pp. 4490–4496, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. Q. Cai, L. Wang, B. Wei, and Q. Liu, “Electrochemical performance of microarc oxidation films formed on AZ91D magnesium alloy in silicate and phosphate electrolytes,” Surface and Coatings Technology, vol. 200, no. 12-13, pp. 3727–3733, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Liang, P. B. Srinivasan, C. Blawert, M. Störmer, and W. Dietzel, “Electrochemical corrosion behaviour of plasma electrolytic oxidation coatings on AM50 magnesium alloy formed in silicate and phosphate based electrolytes,” Electrochimica Acta, vol. 54, no. 14, pp. 3842–3850, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. K. Murakami, M. Hino, M. Hiramatsu et al., “Corrosion protection of AZ91D magnesium alloy by anodization using phosphate electrolyte,” Materials Transactions, vol. 48, no. 12, pp. 3101–3108, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. K. Murakami, M. Hino, and T. Kanadani, Anodization of Magnesium Alloys Using Phosphate Solution, InTech, Rijeka, Croatia, 2011.
  29. H. Chen, W. Li, H. Liu, and L. Zhu, “Performance enhancement of CdS-sensitized TiO2 mesoporous electrode with two different sizes of CdS nanoparticles,” Microporous and Mesoporous Materials, vol. 138, no. 1–3, pp. 235–238, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. H. Xu, X. Tao, D.-T. Wang, Y.-Z. Zheng, and J.-F. Chen, “Enhanced efficiency in dye-sensitized solar cells based on TiO2 nanocrystal/nanotube double-layered films,” Electrochimica Acta, vol. 55, no. 7, pp. 2280–2285, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. M.-S. Kim, J.-J. Ryu, and Y.-M. Sung, “One-step approach for nano-crystalline hydroxyapatite coating on titanium via micro-arc oxidation,” Electrochemistry Communications, vol. 9, no. 8, pp. 1886–1891, 2007. View at Publisher · View at Google Scholar · View at Scopus
  32. C. H. Ao and S. C. Lee, “Indoor air purification by photocatalyst TiO2 immobilized on an activated carbon filter installed in an air cleaner,” Chemical Engineering Science, vol. 60, no. 1, pp. 103–109, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. Y.-K. Shin, W.-S. Chae, Y.-W. Song, and Y.-M. Sung, “Formation of titania photocatalyst films by microarc oxidation of Ti and Ti-6Al-4V alloys,” Electrochemistry Communications, vol. 8, no. 3, pp. 465–470, 2006. View at Publisher · View at Google Scholar · View at Scopus
  34. M. R. Bayati, A. Z. Moshfegh, and F. Golestani-Fard, “Effect of electrical parameters on morphology, chemical composition, and photoactivity of the nano-porous titania layers synthesized by pulse-microarc oxidation,” Electrochimica Acta, vol. 55, no. 8, pp. 2760–2766, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. S. V. Lamaka, M. L. Zheludkevich, K. A. Yasakau, R. Serra, S. K. Poznyak, and M. G. S. Ferreira, “Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability,” Progress in Organic Coatings, vol. 58, no. 2-3, pp. 127–135, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Sathiyanarayanan, S. S. Azim, and G. Venkatachari, “A new corrosion protection coating with polyaniline-TiO2 composite for steel,” Electrochimica Acta, vol. 52, no. 5, pp. 2068–2074, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. G. X. Shen, Y. C. Chen, L. Lin, C. J. Lin, and D. Scantlebury, “Study on a hydrophobic nano-TiO2 coating and its properties for corrosion protection of metals,” Electrochimica Acta, vol. 50, no. 25-26, pp. 5083–5089, 2005. View at Publisher · View at Google Scholar · View at Scopus
  38. R. Arrabal, E. Matykina, P. Skeldon, and G. E. Thompson, “Incorporation of zirconia particles into coatings formed on magnesium by plasma electrolytic oxidation,” Journal of Materials Science, vol. 43, no. 5, pp. 1532–1538, 2008. View at Publisher · View at Google Scholar · View at Scopus
  39. R. Arrabal, E. Matykina, F. Viejo, P. Skeldon, G. E. Thompson, and M. C. Merino, “AC plasma electrolytic oxidation of magnesium with zirconia nanoparticles,” Applied Surface Science, vol. 254, no. 21, pp. 6937–6942, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. V. N. Malyshev and K. M. Zorin, “Features of microarc oxidation coatings formation technology in slurry electrolytes,” Applied Surface Science, vol. 254, no. 5, pp. 1511–1516, 2007. View at Publisher · View at Google Scholar · View at Scopus
  41. D. A. Jones, Principles and Prevention of Corrosion, Prentice Hall, Upper Saddle River, NJ, USA, 2nd edition, 1996.
  42. J. M. Wheeler, C. A. Collier, J. M. Paillard, and J. A. Curran, “Evaluation of micromechanical behaviour of plasma electrolytic oxidation (PEO) coatings on Ti-6Al-4V,” Surface and Coatings Technology, vol. 204, no. 21-22, pp. 3399–3409, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. S. Durdu, A. Aytaç, and M. Usta, “Characterization and corrosion behavior of ceramic coating on magnesium by micro-arc oxidation,” Journal of Alloys and Compounds, vol. 509, no. 34, pp. 8601–8606, 2011. View at Publisher · View at Google Scholar · View at Scopus
  44. C. Burda, Y. Lou, X. Chen, A. C. S. Samia, J. Stout, and J. L. Gole, “Enhanced nitrogen doping in TiO2 nanoparticles,” Nano Letters, vol. 3, no. 8, pp. 1049–1051, 2003. View at Publisher · View at Google Scholar · View at Scopus
  45. C. Aprile, A. Corma, and H. Garcia, “Enhancement of the photocatalytic activity of TiO2 through spatial structuring and particle size control: from subnanometric to submillimetric length scale,” Physical Chemistry Chemical Physics, vol. 10, no. 6, pp. 769–783, 2008. View at Publisher · View at Google Scholar · View at Scopus
  46. J. Jiang, G. Oberdörster, and P. Biswas, “Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies,” Journal of Nanoparticle Research, vol. 11, no. 1, pp. 77–89, 2009. View at Publisher · View at Google Scholar · View at Scopus
  47. H. F. Guo, M. Z. An, H. B. Huo, S. Xu, and L. J. Wu, “Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions,” Applied Surface Science, vol. 252, no. 22, pp. 7911–7916, 2006. View at Publisher · View at Google Scholar · View at Scopus
  48. A. Dey, R. U. Rani, H. K. Thota, A. K. Sharmaa, P. Bandyopadhyay, and A. K. Mukhopadhyay, “Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation,” Ceramics International, vol. 39, no. 3, pp. 3313–3320, 2013. View at Publisher · View at Google Scholar
  49. P. B. Srinivasan, C. Blawert, M. Störmer, and W. Dietzel, “Characterisation of tribological and corrosion behaviour of plasma electrolytic oxidation coated AM50 magnesium alloy,” Surface Engineering, vol. 26, no. 5, pp. 340–346, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. W. Li, M. Tang, L. Zhu, and H. Liu, “Formation of microarc oxidation coatings on magnesium alloy with photocatalytic performance,” Applied Surface Science, vol. 258, no. 24, pp. 10017–10021, 2012. View at Publisher · View at Google Scholar
  51. R. H. U. Khan, A. L. Yerokhin, and A. Matthews, “Structural characteristics and residual stresses in oxide films produced on Ti by pulsed unipolar plasma electrolytic oxidation,” Philosophical Magazine, vol. 88, no. 6, pp. 795–807, 2008. View at Publisher · View at Google Scholar · View at Scopus
  52. S. Sathiyanarayanan, S. S. Azim, and G. Venkatachari, “Corrosion resistant properties of polyaniline-acrylic coating on magnesium alloy,” Applied Surface Science, vol. 253, no. 4, pp. 2113–2117, 2006. View at Publisher · View at Google Scholar · View at Scopus
  53. A. Ghasemi, V. S. Raja, C. Blawert, W. Dietzel, and K. U. Kainer, “Study of the structure and corrosion behavior of PEO coatings on AM50 magnesium alloy by electrochemical impedance spectroscopy,” Surface and Coatings Technology, vol. 202, no. 15, pp. 3513–3518, 2008. View at Publisher · View at Google Scholar · View at Scopus
  54. A. Ghasemi, V. S. Raja, C. Blawert, W. Dietzel, and K. U. Kainer, “The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatings,” Surface and Coatings Technology, vol. 204, no. 9-10, pp. 1469–1478, 2010. View at Publisher · View at Google Scholar · View at Scopus