Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013 (2013), Article ID 373959, 7 pages
http://dx.doi.org/10.1155/2013/373959
Research Article

The Insulation Properties of Oil-Impregnated Insulation Paper Reinforced with Nano-TiO2

1State Key Laboratory of Power Transmission Equipment & System Security and New Technology, Chongqing University, Shapingba District, Chongqing 400044, China
2FREEDM Systems Center, Department of Electrical and Computer Engineering, North Carolina State University, Raleigh, NC 27606, USA
3College of Engineering and Technology, Southwest University, Beibei District, Chongqing 400715, China

Received 13 September 2013; Accepted 1 October 2013

Academic Editor: Wenjie Mai

Copyright © 2013 Ruijin Liao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. E. Lundgaard, W. Hansen, D. Linhjell, and T. J. Painter, “Aging of oil-impregnated paper in power transformers,” IEEE Transactions on Power Delivery, vol. 19, no. 1, pp. 230–239, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. T. V. Oommen and T. A. Prevost, “Cellulose insulation in oil-filled power transformers—part II—maintaining insulation integrity and life,” IEEE Electrical Insulation Magazine, vol. 22, no. 2, pp. 5–14, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. T. A. Prevost and T. V. Oommen, “Cellulose insulation in oil-filled power transformers—part I—history and development,” IEEE Electrical Insulation Magazine, vol. 22, no. 1, pp. 28–35, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. V. Segal, A. Hjortsberg, A. Rabinovich, and D. Nattrass, “Experimental study of magnetic colloidal fluids behavior in power transformers,” Journal of Magnetism and Magnetic Materials, vol. 215, no. 2, pp. 513–515, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. J. G. Huang, F. O’ Sullivan, M. Zahn, O. Hjortstam, L. A. A. Pettersson, and R. Liu, “Effects of nanoparticle charging on streamer development in transformer oil-based nanofluids,” Journal of Applied Physics, vol. 107, no. 1, Article ID 014310, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. P. KopWansky, L. Tomco, and K. Marton, “The DC dielectric breakdown strength of magnetic fluids based on transformer oil,” Journal of Magnetism and Magnetic Materials, vol. 289, no. 1, pp. 415–418, 2005. View at Google Scholar
  7. G. W. Lee, M. Park, J. Kim, J. I. Lee, and H. G. Yoon, “Enhanced thermal conductivity of polymer composites filled with hybrid filler,” Composites A, vol. 37, no. 5, pp. 727–734, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. C. P. Wong and R. S. Bollampally, “Thermal conductivity, elastic modulus, and coefficient of thermal expansion of polymer composites filled with ceramic particles for electronic packaging,” Journal of Applied Polymer Science, vol. 74, no. 14, pp. 3396–3403, 1999. View at Google Scholar
  9. C. Y. Hsieh and S. L. Chung, “High thermal conductivity epoxy molding compound filled with a combustion synthesized AIN powder,” Journal of Applied Polymer Science, vol. 102, no. 5, pp. 4734–4740, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. P. Bujard, G. Kuhnlein, S. Ino, and T. Shiobara, “Thermal conductivity of molding compounds for plastic packaging,” in Proceedings of the IEEE 44th Electronic Components & Technology Conference, pp. 159–163, May 1994. View at Scopus
  11. G. W. Lee, J. I. Lee, S. S. Lee, M. Park, and J. Kim, “Enhanced thermal conductivity of polymer composites filled with hybrid filler,” Composites A, vol. 37, no. 5, pp. 727–734, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Procter and J. Solc, “Improved thermal conductivity in microelectronic encapsulants,” in Proceedings of the 41st Electronic Components & Technology Conference, pp. 835–842, Atlanta, Ga, USA, May 1991. View at Scopus
  13. M. Ohashi, S. Kawakami, Y. Yokogawa, and G. C. Lai, “Spherical aluminum nitride fillers for heat-conducting plastic packages,” Journal of the American Ceramic Society, vol. 88, no. 9, pp. 2615–2618, 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. P. Pang and P. Englezos, “Application of pretreated ground calcium carbonate in mechanical pulp suspensions,” Pulp and Paper Canada, vol. 104, no. 6, pp. 37–39, 2003. View at Google Scholar
  15. B. P. Lambert and J. Lowes, U.S. Patent 3873336, 1975.
  16. K. T. Wu, U.S. Patent 5599388, 1997.
  17. B. Thorp, “Engineered fillers: an agenda 2020 goal-to improve forest products industry economics, we must learn to leverage resources. One of those resources is engineered fillers,” Solutions, vol. 88, no. 5, pp. 45–48, 2005. View at Google Scholar
  18. Y. F. Du, Y. Z. Lv, C. R. Li et al., “Effect of semiconductive nanoparticles on insulating performances of transformer oil dielectrics and electrical insulation,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 19, no. 3, pp. 770–776, 2012. View at Google Scholar
  19. T. K. Saha and P. Purkait, “Investigation of polarization and depolarization current measurements for the assessment of oil-paper insulation of aged transformers,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 11, no. 1, pp. 144–154, 2004. View at Publisher · View at Google Scholar · View at Scopus