Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013, Article ID 404903, 6 pages
http://dx.doi.org/10.1155/2013/404903
Research Article

Strain Mapping and Nanocrystallite Size Determination by Neutron Diffraction in an Aluminum Alloy (AA5083) Severely Plastically Deformed through Equal Channel Angular Pressing

1Departamento de Ingeniería Mecánica, Energética y de Materiales, ETSIIT-UPNA, Campus de Arrosadía S/N, 31006 Pamplona, Spain
2WMG, International Manufacturing Centre, University of Warwick, Coventry CV4 7AL, UK
3Department of Crystallography, Institute of Materials Science of Barcelona, Spanish Council for Scientific Research, ICMAB-CSIC, UAB Campus, 08193 Bellaterra, Spain

Received 28 September 2013; Accepted 1 November 2013

Academic Editor: Khaled Youssef

Copyright © 2013 P. A. González Crespo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Z. Valiev, R. K. Islamgaliev, and I. V. Alexandrov, “Bulk nanostructured materials from severe plastic deformation,” Progress in Materials Science, vol. 45, no. 2, pp. 103–189, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Valiev, “Nanostructuring of metals by severe plastic deformation for advanced properties,” Nature Materials, vol. 3, no. 8, pp. 511–516, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. P. J. Withers and H. K. D. H. Bhadeshia, “Residual stress part 2—nature and origins,” Materials Science and Technology, vol. 17, no. 4, pp. 366–375, 2001. View at Google Scholar · View at Scopus
  4. M. L. Martinez-Perez, F. J. Mompean, J. Ruiz-Hervias et al., “Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction,” Acta Materialia, vol. 52, no. 18, pp. 5303–5313, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. E. J. Mittemeijer and U. Welzel, “The “state of the art” of the diffraction analysis of crystallite size and lattice strain,” Zeitschrift fur Kristallographie, vol. 223, no. 9, pp. 552–560, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. F. J. Humphreys, P. B. Prangnell, J. R. Bowen, A. Gholinia, and C. Harris, “Developing stable fine-grain microstructures by large strain deformation,” Philosophical Transactions of the Royal Society A, vol. 357, no. 1756, pp. 1663–1681, 1999. View at Google Scholar · View at Scopus
  7. R. Luri, C. J. Luis, and J. Leon, “Finite element modelling and analysis of processing routes by using equal channel angular extrusion,” in Proceedings of the 10th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” (TMT '06), pp. 773–776, 2006.
  8. A. L. Ortiz and L. Shaw, “X-ray diffraction analysis of a severely plastically deformed aluminum alloy,” Acta Materialia, vol. 52, no. 8, pp. 2185–2197, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Liu, Y. D. Wang, S. D. Wu et al., “Textures and mechanical behavior of Mg–3.3%Li alloy after ECAP,” Scripta Materialia, vol. 51, no. 11, pp. 1057–1061, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. K. Oh-Ishi, A. P. Zhilyaev, and T. R. McNelley, “Effect of strain path on evolution of deformation bands during ECAP of pure aluminum,” Materials Science and Engineering A, vol. 410-411, pp. 183–187, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. C. J. Luis Pérez, “On the correct selection of the channel die in ECAP processes,” Scripta Materialia, vol. 50, no. 3, pp. 387–393, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. C. J. Luis Pérez, P. A. González, and Y. Garcés, “Equal channel angular extrusionin a commercial Al-Mn alloy,” Journal of Materials Processing Technology, vol. 143-144, pp. 506–511, 2003. View at Publisher · View at Google Scholar
  13. G. Bruno, T. Pirling, P. J. Withers, W. Hutt, and S. Rowe, “SALSA: strain analyser for large and small scale engineering applications,” Journal of Neutron Research, vol. 11, no. 4, pp. 235–239, 2003. View at Google Scholar
  14. T. Pirling, G. Bruno, and P. J. Withers, “SALSA: advances in residual stress measurement at ILL,” Materials Science Forum, vol. 524-525, pp. 217–222, 2006. View at Google Scholar · View at Scopus
  15. D. Richard, M. Ferrand, and G. J. Kearley, Large Array Manipulation Program, ILL, 2007.
  16. “IDL v 6. Research Systems Inc.,” 2003.
  17. “Materials Studio Modeling v. 4. 3 Accelrys Software”.
  18. G. S. Pawley, “Unit-cell refinement from powder diffraction scans,” Journal of Applied Crystallography, vol. 14, part 14, pp. 357–361, 1981. View at Google Scholar
  19. “Transform v. 3.4 Fortner Software LLC.,” 1998.
  20. P. Thompson, D. E. Cox, and J. B. Hastings, “Rietveld refinement of debye-scherrer synchrotron x-ray data from Al2O3,” Journal of Applied Crystallography, vol. 20, part 2, pp. 79–83, 1987. View at Google Scholar