Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2013 (2013), Article ID 515741, 10 pages
http://dx.doi.org/10.1155/2013/515741
Research Article

Investigation of the In Vitro Degradation of a Novel Polylactide/Nanohydroxyapatite Composite for Artificial Bone

1State Key Department of Orthopedics, The Second People’s Hospital of Shenzhen, Shenzhen, Guangdong 518035, China
2Key Laboratory of Tissue Engineering, Shenzhen, Guangdong 518035, China

Received 22 April 2013; Revised 7 August 2013; Accepted 20 September 2013

Academic Editor: Anchal Srivastava

Copyright © 2013 Jianghong Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [11 citations]

The following is the list of published articles that have cited the current article.

  • Mohammed Naffakh, and Ana M. Diez-Pascual, “WS2 inorganic nanotubes reinforced poly(L-lactic acid)/hydroxyapatite hybrid composite biomaterials,” Rsc Advances, vol. 5, no. 80, pp. 65514–65525, 2015. View at Publisher · View at Google Scholar
  • Aaron R. Merriam, Joachim Kohn, Michael G. Dunn, Jay M. Patel, and Charles J. Gatt, “Negative Outcomes of Poly(l-Lactic Acid) Fiber-Reinforced Scaffolds in an Ovine Total Meniscus Replacement Model,” Tissue Engineering - Part A, vol. 22, no. 17-18, pp. 1116–1125, 2016. View at Publisher · View at Google Scholar
  • Weimin Zhu, Daiqi Guo, Yunfang Chen, Daping Wang, Liangquan Peng, Kang Chen, Yanjun Zeng, Weili Xiu, Jinfang Huang, Jianghong Huang, and Wei Lu, “Cytocompatibility of PLA/Nano-HA composites for interface fixation,” Artificial Cells, Nanomedicine and Biotechnology, vol. 44, no. 4, pp. 1122–1126, 2016. View at Publisher · View at Google Scholar
  • Jessica Abert, Alessandro Amella, Simone Weigelt, and Horst Fischer, “Degradation and swelling issues of poly-(d,l-lactide)/β-tricalcium phosphate/calcium carbonate composites for bone replacement,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 54, pp. 82–92, 2016. View at Publisher · View at Google Scholar
  • Anna Morawska-Chochół, Barbara Szaraniec, Paulina Uszko, Karol Gryń, and Jan Chłopek, “The influence of bioactive additives on polylactide accelerated degradation,” E-Polymers, vol. 16, no. 6, pp. 475–480, 2016. View at Publisher · View at Google Scholar
  • Yun Zhao, Bei Liu, Chen You, and Minfang Chen, “Effects of MgO whiskers on mechanical properties and crystallization behavior of PLLA/MgO composites,” Materials and Design, vol. 89, pp. 573–581, 2016. View at Publisher · View at Google Scholar
  • Ben Zhang, Artem B. Kutikov, Tera M. Filion, and Jie Song, “Facile Stem Cell Delivery to Bone Grafts Enabled by Smart Shape Recovery and Stiffening of Degradable Synthetic Periosteal Membranes,” Advanced Functional Materials, vol. 27, no. 5, 2017. View at Publisher · View at Google Scholar
  • Ammar Z. Alshemary, Ahmet Engin Pazarceviren, Aysen Tezcaner, and Zafer Evis, “ Fe 3+ /SeO42 dual doped nano hydroxyapatite: A novel material for biomedical applications ,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2017. View at Publisher · View at Google Scholar
  • José E. Báez, Ángel Marcos-Fernández, Rodrigo Navarro, and Carolina García, “Study on the effect of linear alkyl [CH2CH2]m and ether [CH2CH2O]m groups in the α,ω-hydroxy telechelic poly(L-lactide) (HOPLLAOH) and their poly(ester-urethanes) (PEUs). Synthesis and Characterization,” Journal of Polymer Research, vol. 24, no. 11, 2017. View at Publisher · View at Google Scholar
  • Hilal Ahmad Rather, Ria Thakore, Ragini Singh, Dhwani Jhala, Sanjay Singh, and Rajesh Vasita, “Antioxidative study of Cerium Oxide nanoparticle functionalised PCL-Gelatin electrospun fibers for wound healing application,” Bioactive Materials, 2017. View at Publisher · View at Google Scholar
  • Behzad Shiroud Heidari, Erfan Oliaei, Hadi Shayesteh, Seyed Mohammad Davachi, Iman Hejazi, Javad Seyfi, Mozhgan Bahrami, and Hamid Rashedi, “Simulation of mechanical behavior and optimization of simulated injection molding process for PLA based antibacterial composite and nanocomposite bone screws using central composite design,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 65, pp. 160–176, 2017. View at Publisher · View at Google Scholar