Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2014 (2014), Article ID 146510, 6 pages
http://dx.doi.org/10.1155/2014/146510
Research Article

Low-Loss Polymer-Based Ring Resonator for Resonant Integrated Optical Gyroscopes

Guang Qian,1,2,3 Jie Tang,1,2,3 Xiao-Yang Zhang,2,3,4 Ruo-Zhou Li,2,3,4 Yu Lu,2,3,4 and Tong Zhang1,2,3,4

1School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
2Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, Nanjing 210096, China
3Suzhou Key Laboratory of Metal Nano-Optoelectronic Technology, Suzhou Research Institute of Southeast University, Suzhou 215123, China
4School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China

Received 28 February 2014; Revised 25 April 2014; Accepted 28 April 2014; Published 22 May 2014

Academic Editor: Qin Chen

Copyright © 2014 Guang Qian et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Suzuki, K. Takiguchi, and K. Hotate, “Monolithically integrated resonator microoptic gyro on silica planar lightwave circuit,” Journal of Lightwave Technology, vol. 18, no. 1, pp. 66–72, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Zhang, G. Qian, Y. Y. Wang et al., “Integrated optical gyroscope using active Long-range surface plasmon-polariton waveguide resonator,” Scientific Reports, vol. 4, article 3855, 2014. View at Google Scholar
  3. X.-Y. Zhang, C.-L. Ji, T. Zhang, and Y.-P. Cui, “Analysis of ring resonator of integrated optical waveguide gyroscope,” in 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, vol. 6722 of Proceedings of SPIE, p. 94, July 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Ciminelli, F. Dell'Olio, C. E. Campanella, and M. N. Armenise, “Photonic technologies for angular velocity sensing,” Advances in Optics and Photonics, vol. 2, no. 3, pp. 370–404, 2010. View at Google Scholar
  5. M. Á. Guillén-Torres, E. Cretu, N. A. F. Jaeger, and L. Chrostowski, “Ring resonator optical gyroscopes—parameter optimization and robustness analysis,” Journal of Lightwave Technology, vol. 30, no. 12, Article ID 6157591, pp. 1802–1817, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Zhang and J. W. Lit, “Direct-coupling single-mode fiber ring resonator,” Journal of the Optical Society of America A, vol. 5, no. 8, pp. 1347–1355, 1988. View at Google Scholar
  7. L. Eldada and L. W. Shacklette, “Advances in polymer integrated optics,” IEEE Journal on Selected Topics in Quantum Electronics, vol. 6, no. 1, pp. 54–68, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. J.-G. Chen, T. Zhang, J.-S. Zhu et al., “Low-loss planar optical waveguides fabricated from polycarbonate,” Polymer Engineering and Science, vol. 49, no. 10, pp. 2015–2019, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Ma, A. K. Jen, and L. R. Dalton, “Polymer-based optical waveguides: materials, processing, and devices,” Advanced Materials, vol. 14, no. 19, pp. 1339–1365, 2002. View at Google Scholar
  10. D.-M. Zhang, C. Chen, X. Sun et al., “Optical properties of Er(DBM)3Phen-doped polymer and fabrication of ridge waveguide,” Optics Communications, vol. 278, no. 1, pp. 90–93, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. X.-Y. Zhang, T. Zhang, and J.-G. Chen, “Thermooptical polymer ring resonator integrated with tunable directional coupler,” in 2008 International Conference on Optical Instruments and Technology: Microelectronic and Optoelectronic Devices and Integration, vol. 7158 of Proceedings of SPIE, p. 71580X, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Bortnik, Y. Hung, H. Tazawa et al., “Electrooptic polymer ring resonator modulation up to 165 GHz,” IEEE Journal on Selected Topics in Quantum Electronics, vol. 13, no. 1, pp. 104–110, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. X.-Y. Zhang, T. Zhang, X.-J. Xue et al., “Tunable optical ring resonator integrated with asymmetric machzehnder interferometer,” Journal of Lightwave Technology, vol. 28, no. 17, pp. 2512–2520, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Gould, T. Baehr-Jones, R. Ding et al., “Silicon-polymer hybrid slot waveguide ring-resonator modulator,” Optics Express, vol. 19, no. 5, pp. 3952–3961, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Yamagata, Y. Yanagase, and Y. Kokubun, “Wide-range tunable microring resonator filter by thermo-optic effect in polymer waveguide,” Japanese Journal of Applied Physics 1: Regular Papers and Short Notes and Review Papers, vol. 43, no. 8, supplement, pp. 5766–5770, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Rabiei, W. H. Steier, C. Zhang, and L. R. Dalton, “Polymer micro-ring filters and modulators,” Journal of Lightwave Technology, vol. 20, no. 11, pp. 1968–1975, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Ren, L.-H. Wang, X.-Y. Han et al., “Organic silicone sol-gel polymer as a noncovalent carrier of receptor proteins for label-free optical biosensor application,” ACS Applied Materials & Interfaces, vol. 5, no. 2, pp. 386–394, 2012. View at Google Scholar
  18. A. Chen, H. Sun, A. Pyayt, L. R. Dalton, J. Luo, and A. K.-Y. Jen, “Microring resonators made in poled and unpoled chromophore-containing polymers for optical communication and sensors,” IEEE Journal on Selected Topics in Quantum Electronics, vol. 14, no. 5, pp. 1281–1288, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. D. M. Shupe, “Fiber resonator gyroscope: sensitivity and thermal nonreciprocity,” Applied Optics, vol. 20, no. 2, pp. 286–289, 1981. View at Google Scholar · View at Scopus
  20. B. Seo, S. Kim, H. Fetterman, W. Steier, D. Jin, and R. Dinu, “Design of ring resonators using electro-optic polymer waveguides,” Journal of Physical Chemistry C, vol. 112, no. 21, pp. 7953–7958, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Hsiao and K. A. Winick, “Planar glass waveguide ring resonators with gain,” Optics Express, vol. 15, no. 26, pp. 17783–17797, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Yariv, “Universal relations for coupling of optical power between microresonators and dielectric waveguides,” Electronics Letters, vol. 36, no. 4, pp. 321–322, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. A. Vlasov and S. J. McNab, “Losses in single-mode silicon-on-insulator strip waveguides and bends,” Optics Express, vol. 12, no. 8, pp. 1622–1631, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. C. Chao and L. J. Guo, “Reduction of surface scattering loss in polymer microrings using thermal-reflow technique,” IEEE Photonics Technology Letters, vol. 16, no. 6, pp. 1498–1500, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Li, T. Zhang, X.-Y. Zhang, S.-Q. Zhu, and D.-X. Yang, “Theoretical analysis of long-range surface plasmon-polariton waveguide gyroscope,” Nanoscience and Nanotechnology Letters, vol. 5, no. 2, pp. 126–129, 2013. View at Google Scholar