Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2014 (2014), Article ID 289108, 16 pages
http://dx.doi.org/10.1155/2014/289108
Review Article

A Review on the Study of the Generation of (Nano)particles Aerosols during the Mechanical Solicitation of Materials

1DRC/CARA/NOVA, Institut National de l’Environnement Industriel et des Risques (INERIS), Parc Technologique Alata BP 2, 60550 Verneuil-en-Halatte, France
2Université de Technologie de Compiègne (UTC), rue Roger Coutollenc, 60200 Compiègne, France

Received 26 April 2013; Accepted 17 December 2013; Published 28 January 2014

Academic Editor: Yanbao Zhao

Copyright © 2014 Neeraj Shandilya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Kulkarni, P. A. Baron, and K. Willeke, Aerosol Measurement: Principle, Techniques and Applications, John Wiley and Sons, Hoboken, NJ, USA, 3rd edition, 2011.
  2. G. Oberdörster, E. Oberdörster, and J. Oberdörster, “Nanotoxicology: an emerging discipline evolving from studies of ultrafine particles,” Environmental Health Perspectives, vol. 113, pp. 823–839, 2005. View at Google Scholar
  3. P. Houdy, M. Lahmani, and F. Marano, Nanoethics and Nanotoxicology, Springer, Heidelberg, Germany, 1st edition, 2011.
  4. C. Bekker, D. H. Brouwer, E. Tielemans, and A. Pronk, “Industrial production and professional application of manufactured nanomaterials-enabled end products in Dutch industries, potential for exposure,” The Annals of Occupational Hygiene, vol. 57, no. 3, pp. 314–327, 2012. View at Publisher · View at Google Scholar
  5. S. Kaluza, J. K. Balderhaar, B. Orthen et al., “Workplace exposure to nanoparticles,” 2010.
  6. C. Buzea, I. I. P. Blandino, and K. Robbie, “Nanomaterials and nanoparticles: sources and toxicity,” Biointerphases, vol. 2, no. 4, pp. MR17–MR172, 2007. View at Google Scholar
  7. Scientific Committee on Emerging and Newly Identified Health Risks (SCENIHR), “The appropriateness of existing methodologies to assess the potential risks associated with engineered and adventitious products of nanotechnologies,” Health and Consumer Protection Directorate-General, European Commission, 2006.
  8. C. Ostiguy, B. Roberge, L. Ménard, and C. A. Endo, “Best Practices Guide to Synthetic Nanoparticle Risk Management, L'Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST),” Report R-599, 2009. View at Google Scholar
  9. National Institute for Occupational Safety and Health (NIOSH), “Centers for Disease Control and Prevention (CDC), Approaches to Safe Nanotechnology,” Publication 2009-125, 2009. View at Google Scholar
  10. A. T. Zimmer and A. D. Maynard, “Investigation of the aerosols produced by a high-speed, hand-held grinder using various substrates,” Annals of Occupational Hygiene, vol. 46, no. 8, pp. 663–672, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Guiot, L. Golanski, and F. Tardif, “Measurement of nanoparticle removal by abrasion,” Journal of Physics, vol. 170, Article ID 012014, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Kukutschová, V. Roubíček, K. Malachová et al., “Wear mechanism in automotive brake materials, wear debris and its potential environmental impact,” Wear, vol. 267, no. 5–8, pp. 807–817, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Vorbau, L. Hillemann, and M. Stintz, “Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings,” Journal of Aerosol Science, vol. 40, no. 3, pp. 209–217, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. L. Schlagenhauf, B. T. T. Chu, J. Buha, F. Nüesch, and J. Wang, “Release of carbon nanotubes from an epoxy-based nanocomposite during an Abrasion process,” Environmental Science and Technology, vol. 46, pp. 7366–7372, 2012. View at Google Scholar
  15. W. Wohlleben, S. Brill, M. W. Meier et al., “On the lifecycle of nanocomposites: comparing released fragments and their in-vivo hazards from three release mechanisms and four nanocomposites,” Small, vol. 7, no. 16, pp. 2384–2395, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. Z.-Z. Zhang, F.-H. Su, K. Wang, W. Jiang, X.-H. Men, and W.-M. Liu, “Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles,” Materials Science and Engineering A, vol. 404, no. 1-2, pp. 251–258, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Rendón and M. Olsson, “Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods,” Wear, vol. 267, no. 11, pp. 2055–2061, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. F. P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Clarendon Press, Oxford, UK, 1954.
  19. A. P. Green, “Friction between unlubricated metals: a theoretical analysis of the junction model,” Proceedings of the Royal Society A, vol. 228, pp. 191–204, 1955. View at Google Scholar
  20. A. Kapoor, J. A. Williams, and K. L. Johnson, “The steady state sliding of rough surfaces,” Wear, vol. 175, no. 1-2, pp. 81–92, 1994. View at Google Scholar · View at Scopus
  21. U. Olofsson and L. Hagman, “Model for micro-slip between flat surfaces based on deformation of ellipsoidal elastic bodies,” Tribology International, vol. 30, no. 8, pp. 599–603, 1997. View at Publisher · View at Google Scholar · View at Scopus
  22. P. J. Blau, Friction, Lubrication, and Wear Technology Vol. 18, ASM Handbook, 1992.
  23. O. Le Bihan, N. Shandilya, L. Gheerardyn, O. Guillon, E. Dore, and M. Morgeneyer, “Investigation of the release of particles from a nanocoated producted,” Advances in Nanoparticles, vol. 2, pp. 39–44, 2013. View at Google Scholar
  24. K. Hokkirigawa and K. Kato, “An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear,” Tribology International, vol. 21, no. 1, pp. 51–57, 1988. View at Google Scholar · View at Scopus
  25. M. A. McCawley, M. S. Kent, and M. T. Berakis, “Ultrafine beryllium number concentration as a possible metric for chronic beryllium disease risk,” Applied Occupational and Environmental Hygiene, vol. 16, no. 5, pp. 631–638, 2001. View at Google Scholar · View at Scopus
  26. K. T. Choe, M. Trunov, S. A. Grinshpun et al., “Particle settling after lead-based paint abatement work and clearance waiting period,” The American Industrial Hygiene Association Journal, vol. 61, no. 6, pp. 798–807, 2000. View at Google Scholar · View at Scopus
  27. I. K. Koponen, K. A. Jensen, and T. Schneider, “Sanding dust from nanoparticle-containing paints: physical characterisation,” Journal of Physics, vol. 151, Article ID 012048, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. B. D. Garg, S. H. Cadle, P. A. Mulawa, P. J. Groblicki, C. Laroo, and G. A. Parr, “Brake wear particulate matter emissions,” Environmental Science and Technology, vol. 34, no. 21, pp. 4463–4469, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. P. G. Sanders, N. Xu, T. M. Dalka, and M. M. Maricq, “Airborne brake wear debris: size distributions, composition, and a comparison of dynamometer and vehicle tests,” Environmental Science and Technology, vol. 37, no. 18, pp. 4060–4069, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. H.-J. Gläsel, F. Bauer, H. Ernst et al., “Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles,” Macromolecular Chemistry and Physics, vol. 201, no. 18, pp. 2765–2770, 2000. View at Google Scholar · View at Scopus
  31. O. Knotek, E. Lugscheider, F. Löffler, G. Krämer, and H. Zimmermann, “Abrasive wear resistance and cutting performance of complex PVD coatings,” Surface and Coatings Technology, vol. 68-69, pp. 489–493, 1994. View at Google Scholar · View at Scopus
  32. L. Reijnders, “The release of TiO2 and SiO2 nanoparticles from nanocomposites,” Polymer Degradation and Stability, vol. 94, no. 5, pp. 873–876, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. J. K. Pandey, K. Raghunatha Reddy, A. Pratheep Kumar, and R. P. Singh, “An overview on the degradability of polymer nanocomposites,” Polymer Degradation and Stability, vol. 88, no. 2, pp. 234–250, 2005. View at Publisher · View at Google Scholar · View at Scopus
  34. X. D. Chen, Z. Wang, Z. F. Liao, Y. L. Mai, and M. Q. Zhang, “Roles of anatase and rutile TiO2 nanoparticles in photooxidation of polyurethane,” Polymer Testing, vol. 26, no. 2, pp. 202–208, 2007. View at Publisher · View at Google Scholar · View at Scopus
  35. R. Kaegi, A. Ulrich, B. Sinnet et al., “Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment,” Environmental Pollution, vol. 156, no. 2, pp. 233–239, 2008. View at Publisher · View at Google Scholar · View at Scopus
  36. W. Wohlleben, M. W. Meier, S. Vogel et al., “Elastic CNT-polyurethane nanocomposite: synthesis, performance and assessment of fragments released during use,” Nanoscale, vol. 5, pp. 369–380, 2013. View at Google Scholar
  37. L.-Y. Hsu and H.-M. Chein, “Evaluation of nanoparticle emission for TiO2 nanopowder coating materials,” Journal of Nanoparticle Research, vol. 9, no. 1, pp. 157–163, 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. S. Sachse, F. Silva, H. Zhu, A. Irfan, A. Leszczynska, and K. Pielichowski, “The effect of nanoclay on dust generation during drilling process of polyamide 6 nanocomposites,” Nanomaterials, vol. 2012, Article ID 189386, 8 pages, 2012. View at Publisher · View at Google Scholar
  39. D. Gohler, M. Stintz, L. Hillemann, and M. Vorbau, “Characterization of Nanoparticle release from surface coatings by the simulation of a sanding process,” Annals of Occupational Hygiene, vol. 54, pp. 615–624, 2010. View at Google Scholar
  40. M. Morgeneyer, O. Le Bihan, A. Ustache, and O. Aguerre-Chariol, “Experimental study of the aerosolization of fine alumina particles from bulk by a vortex shaker,” Powder Technology, vol. 246, pp. 583–589, 2013. View at Google Scholar
  41. N. Isbaseta and B. Biscans, “Ultrafine aerosol emission from free fall of TiO2 and SiO2 Nanopowders,” Kona, vol. 25, pp. 190–204, 2007. View at Google Scholar
  42. P. A. Baron, A. D. Maynard, and M. Foley, “Evaluation of Aerosol Release during the handling of Unrefined Single Walled Carbon Nanotube Material,” NIOSH DART-02-191, 2003. View at Google Scholar
  43. A. D. Maynard, P. A. Baron, M. Foley, A. A. Shvedova, E. R. Kisin, and V. Castranova, “Exposure to carbon nanotube material: aerosol release during the handling of unrefined single-walled carbon nanotube material,” Journal of Toxicology and Environmental Health A, vol. 67, no. 1, pp. 87–107, 2004. View at Google Scholar · View at Scopus
  44. I. Ogura, H. Sakurai, and M. Gamo, “Dustiness testing of engineered nanomaterials,” Journal of Physics, vol. 170, Article ID 012003, 2009. View at Publisher · View at Google Scholar · View at Scopus
  45. S. Plitzko, E. Gierke, N. Dziurowitz, and D. Brobell, “Generation of CNT/CNF dusts by a shaker aerosol generator in combination with a thermal precipitator as the collection system for characterization of the fibre morphology,” Gefahrstoffe Reinhaltung der Luft, vol. 70, no. 1-2, pp. 31–35, 2010. View at Google Scholar · View at Scopus
  46. T. A. J. Kuhlbusch, C. Asbach, H. Fissan, D. Göhler, and M. Stintz, “Nanoparticle exposure at nanotechnology workplaces: a review,” Particle and Fibre Toxicology, vol. 8, article 22, 2011. View at Publisher · View at Google Scholar · View at Scopus
  47. A. Thorpe and R. C. Brown, “Measurements of the effectiveness of dust extraction systems of hand sanders used on wood,” Annals of Occupational Hygiene, vol. 38, no. 3, pp. 279–302, 1994. View at Google Scholar · View at Scopus
  48. O. Le Bihan, M. Morgeneyer, N. Shandilya, O. A. Chariol, and C. Bressot, Handbook on Safe Use of Nanomaterials Chapter 7.2: Emission Chambers, A Method for Nanosafety, Academic Press, San Diego, Calif, USA, 2014.
  49. B. R'mili, O. Le Bihan, C. Dutouquet, O. Aguerre-Charriol, and E. Frejafon, “Particle sampling by TEM grid filtration,” Aerosol Science and Technology, vol. 47, pp. 767–775.
  50. M. George and D. T. Goddard, “The characterisation of rough particle contacts by atomic force microscopy,” Journal of Colloid and Interface Science, vol. 299, no. 2, pp. 665–672, 2006. View at Publisher · View at Google Scholar · View at Scopus
  51. J. Drelich, “Adhesion forces measured between particles and substrates with nano-roughness,” Minerals and Metallurgical Processing, vol. 23, no. 4, pp. 226–232, 2006. View at Google Scholar · View at Scopus
  52. M. S. Esayanur, S. B. Yeruva, Y. I. Rabinovich, and B. M. Moudgil, “Interaction force measurements using atomic force microscopy for characterization and control of adhesion, dispersion and lubrication in particulate systems,” Journal of Adhesion Science and Technology, vol. 19, no. 8, pp. 611–626, 2005. View at Publisher · View at Google Scholar · View at Scopus
  53. L. J. Jallo, Y. Chen, J. Bowen, F. Etzler, and R. Dave, “Prediction of inter-particle adhesion force from surface energy and surface roughness,” Journal of Adhesion Science and Technology, vol. 25, no. 4-5, pp. 367–384, 2011. View at Publisher · View at Google Scholar · View at Scopus
  54. W. Q. Ding, “Micro/nano-particle manipulation and adhesion studies,” Adhesion Science and Technology, vol. 22, pp. 457–480, 2008. View at Google Scholar
  55. C. Yuan, Z. Jin, J. L. Tipper, and X. Yan, “Numerical surface characterization of wear debris from artificial joints using atomic force microscopy,” Chinese Science Bulletin, vol. 54, no. 24, pp. 4583–4588, 2010. View at Publisher · View at Google Scholar · View at Scopus
  56. A. Haris, T. Adachi, and W. Araki, “Nano-scale characterization of fracture surfaces of blended epoxy resins related to fracture properties,” Materials Science and Engineering A, vol. 496, no. 1-2, pp. 337–344, 2008. View at Publisher · View at Google Scholar · View at Scopus
  57. S. Turri, L. Torlaj, F. Piccinini, and M. Levi, “Abrasion and nanoscratch in nanostructured epoxy coatings,” Journal of Applied Polymer Science, vol. 118, no. 3, pp. 1720–1727, 2010. View at Publisher · View at Google Scholar · View at Scopus
  58. K. Degiampietro and R. Colaço, “Nanoabrasive wear induced by an AFM diamond tip on stainless steel,” Wear, vol. 263, no. 7–12, pp. 1579–1584, 2007. View at Publisher · View at Google Scholar · View at Scopus
  59. M. Munz, J.-H. Kim, O. Krause, and D. Roy, “Imaging surfaces of nano-scale roughness by atomic force microscopy with carbon nanotubes as tips: a comparative study,” Surface and Interface Analysis, vol. 43, no. 11, pp. 1382–1391, 2011. View at Publisher · View at Google Scholar · View at Scopus
  60. R. Holm, Electrical Contacts, H. Gerbers, Stockholm, Sweden, 1946.
  61. T. O. Mulhearn and L. E. Samuels, “The abrasion of metals: a model of the process,” Wear, vol. 5, no. 6, pp. 478–498, 1962. View at Google Scholar · View at Scopus
  62. E. Rabinowicz, Friction and Wear of Materials, John Wiley and Sons, New York, NY, USA, 1965.
  63. B. R. Lawn, “A model for the wear of brittle solids under fixed abrasive conditions,” Wear, vol. 33, no. 2, pp. 369–372, 1975. View at Google Scholar · View at Scopus
  64. G. Sundararajan, “A new model for two-body abrasive wear based on the localization of plastic deformation,” Wear, vol. 117, no. 1, pp. 1–35, 1987. View at Google Scholar · View at Scopus
  65. A. A. Torrance and T. R. Buckley, “A slip-line field model of abrasive wear,” Wear, vol. 196, no. 1-2, pp. 35–45, 1996. View at Google Scholar · View at Scopus
  66. U. Olofsson, “Cyclic micro-slip under unlubricated conditions,” Tribology International, vol. 28, no. 4, pp. 207–217, 1995. View at Google Scholar · View at Scopus
  67. J. Jiang, F. Sheng, and F. Ren, “Modelling of two-body abrasive wear under multiple contact conditions,” Wear, vol. 217, no. 1, pp. 35–45, 1998. View at Google Scholar · View at Scopus
  68. L. Fang, J. Xing, W. Liu, Q. Xue, G. Wu, and X. Zhang, “Computer simulation of two-body abrasion processes,” Wear, vol. 250-251, no. 2, pp. 1356–1360, 2001. View at Google Scholar · View at Scopus
  69. S. Fouvry, T. Liskiewicz, P. Kapsa, S. Hannel, and E. Sauger, “An energy description of wear mechanisms and its applications to oscillating sliding contacts,” Wear, vol. 255, no. 1–6, pp. 287–298, 2003. View at Publisher · View at Google Scholar · View at Scopus
  70. A. A. Torrance, “Modelling abrasive wear,” Wear, vol. 258, no. 1–4, pp. 281–293, 2005. View at Publisher · View at Google Scholar · View at Scopus
  71. M. T. Siniawski, S. J. Harris, and Q. Wang, “A universal wear law for abrasion,” Wear, vol. 262, no. 7-8, pp. 883–888, 2007. View at Publisher · View at Google Scholar · View at Scopus
  72. K. De Moerlooze, F. Al-Bender, and H. Van Brussel, “A novel energy-based generic wear model at the asperity level,” Wear, vol. 270, no. 11-12, pp. 760–770, 2011. View at Publisher · View at Google Scholar · View at Scopus
  73. M. Eriten, A. A. Polycarpou, and L. A. Bergman, “Physics-based modeling for partial slip behavior of spherical contacts,” International Journal of Solids and Structures, vol. 47, no. 18-19, pp. 2554–2567, 2010. View at Publisher · View at Google Scholar · View at Scopus
  74. M. Eriten, A. A. Polycarpou, and L. A. Bergman, “Physics-based modeling for fretting behavior of nominally flat rough surfaces,” International Journal of Solids and Structures, vol. 48, no. 10, pp. 1436–1450, 2011. View at Publisher · View at Google Scholar · View at Scopus
  75. M. Kato, A. Tsuruta, S. Kuroda, and Z. Osawa, “Effect of stereoregularity on the photo-oxidative degradation and weathering of polypropylenes,” Polymer Degradation and Stability, vol. 67, no. 1, pp. 1–5, 2000. View at Publisher · View at Google Scholar · View at Scopus
  76. M. L. Castejon, P. Tiemblo, and J. M. Gomez-Elvira, “Physicochemical processes along the early stages of the thermal degradation of isotactic polypropylene,” Polymer Degradation and Stability, vol. 70, pp. 297–302, 2000. View at Google Scholar
  77. J. Li, R. Yang, J. Yu, and Y. Liu, “Natural photo-aging degradation of polypropylene nanocomposites,” Polymer Degradation and Stability, vol. 93, no. 1, pp. 84–89, 2008. View at Publisher · View at Google Scholar · View at Scopus
  78. E. Schütz, F. Berger, O. Dirckx, and A. Chambaudet, “Study of degradation mechanisms of a paint coating during an artificial aging test,” Polymer Degradation and Stability, vol. 65, no. 1, pp. 123–130, 1999. View at Publisher · View at Google Scholar · View at Scopus