Influence of 1D and 2D Carbon Fillers and Their Functionalisation on Crystallisation and Thermomechanical Properties of Injection Moulded Nylon 6,6 Nanocomposites

<table>SEM micrograph of fracture surface of (a) neat nylon 6,6 and  higher magnification micrographs of fracture surface of nanocomposites containing 0.5 wt. % of (b) CNT, (c) OCNT, (d) f-CNT, (e) RGO, (f) GO, and (g) f-Ge.</table>

Journal of Nanomaterials

fig6

Figure 6

Figure 6: Influence of 1D and 2D Carbon Fillers and Their Functionalisation on Crystallisation and Thermomechanical Properties of Injection Moulded Nylon 6,6 Nanocomposites 

Figure 6 | Influence of 1D and 2D Carbon Fillers and Their Functionalisation on Crystallisation and Thermomechanical Properties of Injection Moulded Nylon 6,6 Nanocomposites 