Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2014 (2014), Article ID 718918, 6 pages
http://dx.doi.org/10.1155/2014/718918
Research Article

The Novel Formation of Barium Titanate Nanodendrites

1Department of Applied Physics, National University of Kaohsiung, Nanzih, Kaohsiung, Taiwan
2Department of Electronic Engineering, Fortune Institute of Technology, Kaohsiung, Taiwan
3Institute of Electro-Optical Science and Engineering, Institute of Microelectronics, National Cheng-Kung University, Tainan, Taiwan
4Department of Electro-Optical Science and Engineering, Kao Yuan University, Kaohsiung, Taiwan
5Department of Electrical Engineering, Institute of Microelectronics, National Cheng-Kung University, Tainan, Taiwan

Received 15 March 2014; Accepted 26 March 2014; Published 30 April 2014

Academic Editor: Fu-Ken Liu

Copyright © 2014 Chien-Jung Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U. van Stevendaal, K. Buse, S. Kämper, H. Hesse, and E. Krätzig, “Light-induced charge transport processes in photorefractive barium titanate doped with rhodium and iron,” Applied Physics B: Lasers and Optics, vol. 63, no. 4, pp. 315–321, 1996. View at Google Scholar · View at Scopus
  2. K. Kumar, “Ceramic capacitors: an overview,” Electronics Information Planning, vol. 25, no. 11, pp. 559–582, 1998. View at Google Scholar
  3. J. F. Scott, “Status report on ferroelectric memory materials,” Integrated Ferroelectrics, vol. 20, no. 1–4, pp. 15–23, 1998. View at Google Scholar
  4. A. B. Alles and V. I. Burdick, “Grain boundary oxidation in PTCR barium titanate thermistors,” Journal of the American Ceramic Society, vol. 76, no. 2, pp. 401–408, 1993. View at Google Scholar · View at Scopus
  5. Z. Zhi-Gang, Z. Gang, W. Ming, and Z. Zhong-Tai, “Temperauture-humidity-gas multifunctional sensitive ceramics,” Sensors and Actuators, vol. 19, no. 1, pp. 71–81, 1989. View at Google Scholar · View at Scopus
  6. M. Mori, T. Kineri, K. Kadono et al., “Effect of the atomic ratio of Ba to Ti on optical properties of gold-dispersed BaTiO3 thin films,” Journal of the American Ceramic Society, vol. 78, no. 9, pp. 2391–2394, 1995. View at Google Scholar · View at Scopus
  7. H. Song, S. X. Dou, M. Chi, H. Gao, Y. Zhu, and P. Ye, “Studies of shallow levels in undoped and rhodium-doped barium titanate,” Journal of the Optical Society of America B: Optical Physics, vol. 15, no. 4, pp. 1329–1334, 1998. View at Google Scholar · View at Scopus
  8. C. Buchal and M. Siegert, “Ferroelectric thin films for optical applications,” Integrated Ferroelectrics, vol. 35, no. 1-4, pp. 1–10, 2001. View at Google Scholar
  9. D. Mahgerefteh and J. Feinberg, “Shallow traps and the apparent sublinear photoconductivity of photorefractive barium titanate,” Modern Physics Letters B, vol. 5, no. 10, pp. 693–700, 1991. View at Google Scholar
  10. J. Xu, W. Zhang, and Z. Yang, “An optical humidity sensor based on Ag nanodendrites,” Applied Surface Science, vol. 280, pp. 920–925, 2013. View at Google Scholar
  11. X. Wang and X. Liu, “Self-assembled synthesis of Ag nanodendrites and their applications to SERS,” Journal of Molecular Structure, vol. 997, no. 1–3, pp. 64–69, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. L. K. Templeton and J. A. Pask, “Formation of BaTiO3 from BaCO3 and TiO2 in Air and in CO2,” Journal of the American Ceramic Society, vol. 42, no. 5, pp. 212–216, 1959. View at Google Scholar
  13. A. Beauger, J. C. Mutin, and J. C. Niepce, “Synthesis reaction of metatitanate BaTiO3—part 2 Study of solid-solid reaction interfaces,” Journal of Materials Science, vol. 18, no. 12, pp. 3543–3550, 1983. View at Publisher · View at Google Scholar · View at Scopus
  14. B. A. Hernandez, K.-S. Chang, E. R. Fisher, and P. K. Dorhout, “Sol-gel template synthesis and characterization of BaTiO3 and PbTiO3 nanotubes,” Chemistry of Materials, vol. 14, no. 2, pp. 480–482, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Pfaff, “Sol-gel synthesis of barium titanate powders of various compositions,” Journal of Materials Chemistry, vol. 2, no. 6, pp. 591–594, 1992. View at Google Scholar · View at Scopus
  16. T. Hoffmann, T. Doll, and V. M. Fuenzalida, “Fabrication of BaTiO3 microstructures by hydrothermal growth,” Journal of the Electrochemical Society, vol. 144, no. 11, pp. L292–L293, 1997. View at Google Scholar · View at Scopus
  17. P. K. Dutta, R. Asiaie, S. A. Akbar, and W. Zhu, “Hydrothermal synthesis and dielectric properties of tetragonal BaTiO3,” Chemistry of Materials, vol. 6, no. 9, pp. 1542–1548, 1994. View at Google Scholar · View at Scopus
  18. M. P. Pechini, “Barium titanium citrate, barium titanium and processes for producing same,” Patent US 3231328, 1996. View at Google Scholar
  19. S. Wada, M. Narahara, T. Hoshina, H. Kakemoto, and T. Tsurumi, “Preparation of nm-sized BaO3 particles using a new 2-step thermal decomposition of barium titanyl oxalate,” Journal of Materials Science, vol. 38, no. 12, pp. 2655–2660, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. J.-G. Kim, J.-G. Ha, T.-W. Lim, and K. Park, “Preparation of porous BaTiO3-based ceramics by high-energy ball-milling process,” Materials Letters, vol. 60, no. 12, pp. 1505–1508, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Hotta, K. Tsunekawa, T. Isobe, K. Sato, and K. Watari, “Synthesis of BaTiO3 powders by a ball milling-assisted hydrothermal reaction,” Materials Science and Engineering A, vol. 475, no. 1-2, pp. 12–16, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. V. Vinothini, P. Singh, and M. Balasubramanian, “Synthesis of barium titanate nanopowder using polymeric precursor method,” Ceramics International, vol. 32, no. 2, pp. 99–103, 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Ghosh, S. Dasgupta, A. Sen, and H. S. Maiti, “Synthesis of barium titanate nanopowder by a soft chemical process,” Materials Letters, vol. 61, no. 2, pp. 538–541, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. J. Jung, D. Y. Lim, J. S. Nho, S. B. Cho, R. E. Riman, and B. Woo Lee, “Glycothermal synthesis and characterization of tetragonal barium titanate,” Journal of Crystal Growth, vol. 274, no. 3-4, pp. 638–652, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. A. V. Ragulya, O. O. Vasylkiv, and V. V. Skorokhod, “Synthesis and sintering of nanocrystalline barium titanate powder under nonisothermal conditions. I. Control of dispersity of barium titanate during its synthesis from barium titanyl oxalate,” Powder Metallurgy and Metal Ceramics, vol. 36, no. 3-4, pp. 170–175, 1997. View at Google Scholar · View at Scopus
  26. J. Bera and D. Sarkar, “Formation of BaTiO3 from barium oxalate and TiO2,” Journal of Electroceramics, vol. 11, no. 3, pp. 131–137, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. W. S. Claubaugh, E. M. Swiggard, and R. Gilchrist, “Preparation of barium titanyl oxalate tetrahydrate for conversion to barium titanate of high purity,” Journal of Research of the National Bureau of Standards, vol. 56, no. 4, pp. 289–291, 1956. View at Google Scholar
  28. M. Stockenhuber, H. Mayer, and J. A. Lercher, “Preparation of barium titanates from oxalates,” Journal of the American Ceramic Society, vol. 76, no. 5, pp. 1185–1190, 1993. View at Google Scholar
  29. M. Z. C. Hu, G. A. Miller, E. A. Payzant, and C. J. Rawn, “Homogeneous (co)precipitation of inorganic salts for synthesis of monodispersed barium titanate particles,” Journal of Materials Science, vol. 35, no. 12, pp. 2927–2936, 2000. View at Publisher · View at Google Scholar · View at Scopus
  30. W. Lu, M. Quilitz, and H. Schmidt, “Nanoscaled BaTiO3 powders with a large surface area synthesized by precipitation from aqueous solutions: preparation, characterization and sintering,” Journal of the European Ceramic Society, vol. 27, no. 10, pp. 3149–3159, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. K. M. Hung, W. D. Yang, and C. C. Huang, “Preparation of nanometer-sized barium titanate powders by a sol-precipitation process with surfactants,” Journal of the European Ceramic Society, vol. 23, no. 11, pp. 1901–1910, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Testino, M. T. Buscaglia, M. Viviani, V. Buscaglia, and P. Nanni, “Synthesis of BaTiO3 particles with tailored size by precipitation from aqueous solutions,” Journal of the American Ceramic Society, vol. 87, no. 1, pp. 79–83, 2004. View at Google Scholar · View at Scopus
  33. J. M. Bind, T. Dupin, J. Schafer, and M. Titeux, “Industrial synthesis of coprecipitated BaTiO3 powders,” Journal Metals, vol. 39, no. 8, pp. 60–61, 1987. View at Google Scholar