Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2014, Article ID 903498, 7 pages
http://dx.doi.org/10.1155/2014/903498
Research Article

Mechanical, Thermal, and Morphological Properties of Nanocomposites Based on Polyvinyl Alcohol and Cellulose Nanofiber from Aloe vera Rind

1Centre for Biocomposites and Biomaterials Processing, Faculty of Forestry, University of Toronto, 33 Willcocks Street, Toronto, ON, Canada M5S 3B3
2Centre of Advanced Chemistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia
3Chemistry Department, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589, Saudi Arabia

Received 14 July 2014; Revised 3 September 2014; Accepted 4 September 2014; Published 14 September 2014

Academic Editor: Zhenhui Kang

Copyright © 2014 Adel Ramezani Kakroodi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [30 citations]

The following is the list of published articles that have cited the current article.

  • Adel Ramezani Kakroodi, Suhara Panthapulakkal, Mohini Sain, and Abdullah Asiri, “Cellulose nanofibers from the skin of beavertail cactus, Opuntia basilaris, as reinforcements for polyvinyl alcohol,” Journal Of Applied Polymer Science, vol. 132, no. 36, 2015. View at Publisher · View at Google Scholar
  • Shadpour Mallakpour, and Mashal Javadpour, “ An innovative strategy for the production of novel magnetite poly(vinyl alcohol) nanocomposite films with double-capped synthesized Fe 3 O 4 nanoparticles with citric acid and vitamin C ,” Composite Interfaces, pp. 1–18, 2015. View at Publisher · View at Google Scholar
  • Joo-Hyung Kim, Bong Sup Shim, Heung Soo Kim, Young-Jun Lee, Seung-Ki Min, Daseul Jang, Zafar Abas, and Jaehwan Kim, “Review of nanocellulose for sustainable future materials,” International Journal of Precision Engineering and Manufacturing - Green Technology, vol. 2, no. 2, pp. 197–213, 2015. View at Publisher · View at Google Scholar
  • Adel R. Kakroodi, and Mohini Sainpp. 195–206, 2015. View at Publisher · View at Google Scholar
  • Asim Shahzad, “Mechanical properties of eco-friendly polymer nanocomposites,” Advanced Structured Materials, vol. 75, pp. 527–559, 2015. View at Publisher · View at Google Scholar
  • Denis Mihaela Panaitescu, Raluca Augusta Gabor, Adriana Nicoleta Frone, and Eugeniu Vasile, “Influence of Thermal Treatment on Mechanical and Morphological Characteristics of Polyamide 11/Cellulose Nanofiber Nanocomposites,” Journal of Nanomaterials, vol. 2015, pp. 1–11, 2015. View at Publisher · View at Google Scholar
  • Layth Mohammed, M. N. M. Ansari, Grace Pua, Mohammad Jawaid, and M. Saiful Islam, “A Review on Natural Fiber Reinforced Polymer Composite and Its Applications,” International Journal of Polymer Science, vol. 2015, pp. 1–15, 2015. View at Publisher · View at Google Scholar
  • Joabel Raabe, Alessandra de Souza Fonseca, Lina Bufalino, Caue Ribeiro, Maria Alice Martins, José Manoel Marconcini, Lourival M. Mendes, and Gustavo Henrique Denzin Tonoli, “ Biocomposite of Cassava Starch Reinforced with Cellulose Pulp Fibers Modified with Deposition of Silica (SiO 2 ) Nanoparticles ,” Journal of Nanomaterials, vol. 2015, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • Fatemeh Safdari, Davood Bagheriasl, Pierre J. Carreau, Marie C. Heuzey, and Musa R. Kamal, “Rheological, Mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites,” Polymer Composites, 2016. View at Publisher · View at Google Scholar
  • Supachok Tanpichai, and Kristiina Oksman, “Cross-linked nanocomposite hydrogels based on cellulose nanocrystals and PVA: Mechanical properties and creep recovery,” Composites Part A: Applied Science and Manufacturing, 2016. View at Publisher · View at Google Scholar
  • Alper Kiziltas, Behzad Nazari, Esra Erbas Kiziltas, Douglas J. S. Gardner, Yousoo Han, and Todd S. Rushing, “Cellulose NANOFIBER-polyethylene nanocomposites modified by polyvinyl alcohol,” Journal Of Applied Polymer Science, vol. 133, no. 6, 2016. View at Publisher · View at Google Scholar
  • Fatemeh Safdari, Pierre J. Carreau, Marie C. Heuzey, Musa R. Kamal, and Mohini M. Sain, “Enhanced properties of poly(ethylene oxide)/cellulose nanofiber biocomposites,” Cellulose, vol. 24, no. 2, pp. 755–767, 2016. View at Publisher · View at Google Scholar
  • S. F. Souza, A. L. Leao, C. B. Lombello, M. Sain, and M. Ferreira, “Cytotoxicity studies of membranes made with cellulose nanofibers from fique macrofibers,” Journal of Materials Science, 2016. View at Publisher · View at Google Scholar
  • Tommaso Santaniello, Lorenzo Migliorini, Erica Locatelli, Ilaria Monaco, Yunsong Yan, Cristina Lenardi, Mauro Comes Franchini, and Paolo Milani, “Hybrid nanocomposites based on electroactive hydrogels and cellulose nanocrystals for high-sensitivity electro–mechanical underwater actuation,” Smart Materials and Structures, vol. 26, no. 8, pp. 085030, 2017. View at Publisher · View at Google Scholar
  • Bayram Poyraz, Ayhan Tozluo?lu, Zeki Candan, Ahmet Demir, and Mustafa Yavuz, “Influence of PVA and silica on chemical, thermo-mechanical and electrical properties of Celluclast-treated nanofibrillated cellulose composites,” International Journal of Biological Macromolecules, 2017. View at Publisher · View at Google Scholar
  • Fatemeh Safdari, Pierre J. Carreau, Marie C. Heuzey, and Musa R. Kamal, “Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers,” Cellulose, 2017. View at Publisher · View at Google Scholar
  • Sharmiza Adnan, and Latifah Jasmani, “Preparation and characterization of nanocrystalline cellulose from Acacia mangium and its reinforcement potential,” Carbohydrate Polymers, vol. 161, pp. 166–171, 2017. View at Publisher · View at Google Scholar
  • Shadpour Mallakpour, and Ahmadreza Nezamzadeh Ezhieh, “Citric Acid and Vitamin C as Coupling Agents for the Surface Coating of ZrO2 Nanoparticles and Their Behavior on the Optical, Mechanical, and Thermal Properties of Poly(vinyl alcohol) Nanocomposite Films,” Journal of Polymers and the Environment, 2017. View at Publisher · View at Google Scholar
  • Zeki Candan, Ahmet Demir, Bayram Poyraz, and Ayhan Tozluoǧlu, “Matrix impact on the mechanical, thermal and electrical properties of microfluidized nanofibrillated cellulose composites,” Journal of Polymer Engineering, vol. 37, no. 9, pp. 921–931, 2017. View at Publisher · View at Google Scholar
  • Xingyan Huang, Cornelis F. De Hoop, Feng Li, Jiulong Xie, Chung-Yun Hse, Jinqiu Qi, Yongze Jiang, and Yuzhu Chen, “Dilute Alkali and Hydrogen Peroxide Treatment of Microwave Liquefied Rape Straw Residue for the Extraction of Cellulose Nanocrystals,” Journal of Nanomaterials, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Tippabattini Jayaramudu, Hyun-U Ko, Hyun Kim, Jung Kim, Ruth Muthoka, and Jaehwan Kim, “Electroactive Hydrogels Made with Polyvinyl Alcohol/Cellulose Nanocrystals,” Materials, vol. 11, no. 9, pp. 1615, 2018. View at Publisher · View at Google Scholar
  • Shikha Shrestha, Francisco Montes, Gregory T. Schueneman, James F. Snyder, and Jeffrey P. Youngblood, “Effects of aspect ratio and crystal orientation of cellulose nanocrystals on properties of Poly(vinyl alcohol) composite fibers,” Composites Science and Technology, 2018. View at Publisher · View at Google Scholar
  • Salma Ben Cheikh, Ridha Ben Cheikh, Eunice Cunha, Paulo E. Lopes, and Maria C. Paiva, “Production of cellulose nanofibers from Alfa grass and application as reinforcement for polyvinyl alcohol,” Plastics, Rubber and Composites, pp. 1–9, 2018. View at Publisher · View at Google Scholar
  • Hairul Abral, Arya Satya Anugrah, Fadli Hafizulhaq, Dian Handayani, Eni Sugiarti, and Ahmad Nove Muslimin, “Effect of nanofibers fraction on properties of the starch based biocomposite prepared in various ultrasonic power,” International Journal of Biological Macromolecules, 2018. View at Publisher · View at Google Scholar
  • Bayram Poyraz, “Enzyme treated CNF biofilms: Characterization,” International Journal of Biological Macromolecules, 2018. View at Publisher · View at Google Scholar
  • Achmad Solikhin, and Kazushige Murayama, “Enhanced properties of poly(vinyl alcohol) composite films filled with microfibrillated cellulose isolated from continuous steam explosion,” International Journal of Plastics Technology, 2018. View at Publisher · View at Google Scholar
  • Mochamad Asrofi, Hairul Abral, Yogi Kurnia Putra, Sm Sapuan, and Hyun-Joong Kim, “Effect of duration of sonication during gelatinization on properties of tapioca starch water hyacinth fiber biocomposite,” International Journal of Biological Macromolecules, vol. 108, pp. 167–176, 2018. View at Publisher · View at Google Scholar
  • Punamshree Das, Nomita Ojah, Raghuram Kandimalla, Kiranjyoti Mohan, Dolly Gogoi, Swapan Kumar Dolui, and Arup Jyoti Choudhury, “Surface modification of electrospun PVA/chitosan nanofibers by dielectric barrier discharge plasma at atmospheric pressure and studies of their mechanical properties and biocompatibility,” International Journal of Biological Macromolecules, 2018. View at Publisher · View at Google Scholar
  • Yannick L Traore, Miral Fumakia, Emmanuel A Ho, and Jijin Gu, “Dynamic mechanical behaviour of nanoparticle loaded biodegradable PVA films for vaginal drug delivery,” Journal of Biomaterials Applications, vol. 32, no. 8, pp. 1119–1126, 2018. View at Publisher · View at Google Scholar
  • Shooboo Salehpour, Fatemeh Rafieian, Mehdi Jonoobi, and Kristiina Oksman, “Effects of molding temperature, pressure and time on polyvinyl alcohol nanocomposites properties produced by freeze drying technique,” Industrial Crops and Products, vol. 121, pp. 1–9, 2018. View at Publisher · View at Google Scholar