Table of Contents Author Guidelines Submit a Manuscript
Table of Contents Alerts

To receive news and publication updates for Journal of Nanomaterials, enter your email address in the box below.

Journal of Nanomaterials
Volume 2015 (2015), Article ID 149736, 7 pages
http://dx.doi.org/10.1155/2015/149736
Research Article

Grafting Carbon Nanotubes on Glass Fiber by Dip Coating Technique to Enhance Tensile and Interfacial Shear Strength

Bahador Dastorian Jamnani,1 Soraya Hosseini,2 Saeed Rahmanian,1 Suraya Abdul Rashid,2,3 Sa'ari b. Mustapha,2 and Sepideh Keshan Balavandy3

1Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
3Advanced Materials and Nanotechnology Lab, Institute of Advanced Technology, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia

Received 10 June 2015; Accepted 17 August 2015

Academic Editor: Shuping Xu

Copyright © 2015 Bahador Dastorian Jamnani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Bahador Dastorian Jamnani, Soraya Hosseini, Saeed Rahmanian, Suraya Abdul Rashid, Sa'ari b. Mustapha, and Sepideh Keshan Balavandy, “Grafting Carbon Nanotubes on Glass Fiber by Dip Coating Technique to Enhance Tensile and Interfacial Shear Strength,” Journal of Nanomaterials, vol. 2015, Article ID 149736, 7 pages, 2015. doi:10.1155/2015/149736