Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2015, Article ID 275230, 8 pages
http://dx.doi.org/10.1155/2015/275230
Research Article

Fabrication and Characterization of Cellulose Acetate/Montmorillonite Composite Nanofibers by Electrospinning

1Energy Materials and Convergence Research Department, Korea Institute of Energy Research, 71-2 Jang-dong, Yuseong-gu, Daejeon 305-343, Republic of Korea
2Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University, 220 Gung-dong, Yuseong-gu, Daejeon 305-764, Republic of Korea

Received 3 September 2014; Accepted 11 February 2015

Academic Editor: Lan Xu

Copyright © 2015 Se Wook Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Xia, T. Fei, Y. He, R. Wang, F. Jiang, and T. Zhang, “Preparation and humidity sensing properties of Ba0.8Sr0.2TiO3 nanofibers via electrospinning,” Materials Letters, vol. 66, no. 1, pp. 19–21, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. S.-H. Choi, S.-J. Choi, B. K. Min, W. Y. Lee, J. S. Park, and I.-D. Kim, “Facile synthesis of p-type perovskite SrTi0.65Fe0.35O3-δ nanofibers prepared by electrospinning and their oxygen-sensing properties,” Macromolecular Materials and Engineering, vol. 298, no. 5, pp. 521–527, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. A. F. Lubambo, R. A. de Freitas, M.-R. Sierakowski et al., “Electrospinning of commercial guar-gum: effects of purification and filtration,” Carbohydrate Polymers, vol. 93, no. 2, pp. 484–491, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. M. J. A. Shirazi, S. Bazgir, M. M. A. Shirazi, and S. Ramakrishna, “Coalescing filtration of oily wastewaters: characterization and application of thermal treated, electrospun polystyrene filters,” Desalination and Water Treatment, vol. 51, no. 31–33, pp. 5974–5986, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Adibzadeh, S. Bazgir, and A. A. Katbab, “Fabrication and characterization of chitosan/poly(vinyl alcohol) electrospun nanofibrous membranes containing silver nanoparticles for antibacterial water filtration,” Iranian Polymer Journal, vol. 23, no. 8, pp. 645–654, 2014. View at Publisher · View at Google Scholar
  6. H. Zhang, X. Jia, F. Han et al., “Dual-delivery of VEGF and PDGF by double-layered electrospun membranes for blood vessel regeneration,” Biomaterials, vol. 34, no. 9, pp. 2202–2212, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Jiang, J. Xie, B. Ma, D. E. Bartlett, A. Xu, and C. H. Wang, “Mussel-inspired protein-mediated surface functionalization of electrospun nanofibers for pH-responsive drug delivery,” Acta Biomaterialia, vol. 10, no. 3, pp. 1324–1332, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. N. G. Rim, C. S. Shin, and H. Shin, “Current approaches to electrospun nanofibers for tissue engineering,” Biomedical Materials, vol. 8, no. 1, Article ID 014102, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Huang, X. Kang, Z. Cheng, P. Ma, Y. Jia, and J. Lin, “Electrospinning preparation and drug delivery properties of Eu3+/Tb3+ doped mesoporous bioactive glass nanofibers,” Journal of Colloid and Interface Science, vol. 387, no. 1, pp. 285–291, 2012. View at Publisher · View at Google Scholar
  10. S. O. Han, J. H. Youk, K. D. Min, Y. O. Kang, and W. H. Park, “Electrospinning of cellulose acetate nanofibers using a mixed solvent of acetic acid/water: effects of solvent composition on the fiber diameter,” Materials Letters, vol. 62, no. 4-5, pp. 759–762, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Lin, B. Ding, Y. Jianyong, and Y. Hsieh, “Direct fabrication of highly nanoporous polystyrene fibers via electrospinning,” ACS Applied Materials and Interfaces, vol. 2, no. 2, pp. 521–528, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Tian, Q. Hu, H. Wu, L. Zhang, H. Fong, and L. Zhang, “Formation and morphological stability of polybutadiene rubber fibers prepared through combination of electrospinning and in-situ photo-crosslinking,” Materials Letters, vol. 65, no. 19-20, pp. 3076–3079, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Johnson, A. Niehaus, S. Nichols et al., “Electrospun PCL in vitro: a microstructural basis for mechanical property changes,” Journal of Biomaterials Science, vol. 20, no. 4, pp. 467–481, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. G. E. Wnek, M. E. Carr, D. G. Simpson, and G. L. Bowlin, “Electrospinning of nanofiber fibrinogen structures,” Nano Letters, vol. 3, no. 2, pp. 213–216, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Nishio, “Material functionalization of cellulose and related polysaccharides via diverse microcompositions,” Advances in Polymer Science, vol. 205, no. 1, pp. 97–151, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Konwarh, N. Karak, and M. Misra, “Electrospun cellulose acetate nanofibers: the present status and gamut of biotechnological applications,” Biotechnology Advances, vol. 31, no. 4, pp. 421–437, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. H. M. Park, X. Liang, A. K. Mohanty, M. Misra, and L. T. Drzal, “Effect of compatibilizer on nanostructure of the biodegradable cellulose acetate/organoclay nanocomposites,” Macromolecules, vol. 37, no. 24, pp. 9076–9082, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. H.-M. Park, M. Misra, L. T. Drzal, and A. K. Mohanty, “‘Green’ nanocomposites from cellulose acetate bioplastic and clay: effect of eco-friendly triethyl citrate plasticizer,” Biomacromolecules, vol. 5, no. 6, pp. 2281–2288, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Cai, F. Huang, Q. Wei et al., “Structure, morphology, thermal stability and carbonization mechanism studies of electrospun PA6/Fe-OMT nanocomposite fibers,” Polymer Degradation and Stability, vol. 93, no. 12, pp. 2180–2185, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Manitiu, S. Horsch, E. Gulari, and R. M. Kannan, “Role of polymer-clay interactions and nano-clay dispersion on the viscoelastic response of supercritical CO2 dispersed polyvinylmethylether (PVME)-Clay nanocomposites,” Polymer, vol. 50, no. 15, pp. 3786–3796, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Hassan-Nejad, J. Ganster, A. Bohn, M. Pinnow, and B. Volkert, “Bio-based nanocomposites of cellulose acetate and nano-clay with superior mechanical properties,” Macromolecular Symposia, vol. 280, no. 1, pp. 123–129, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Ji, B. Li, S. Ge, J. C. Sokolov, and M. H. Rafailovich, “Structure and nanomechanical characterization of electrospun PS/clay nanocomposite fibers,” Langmuir, vol. 22, no. 3, pp. 1321–1328, 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Zhang and C. A. Wilkie, “Fire retardancy of polyethylene-alumina trihydrate containing clay as a synergist,” Polymers for Advanced Technologies, vol. 16, no. 7, pp. 549–553, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Zhu, A. B. Morgan, F. J. Lamelas, and C. A. Wilkie, “Fire properties of polystyrene-clay nanocomposites,” Chemistry of Materials, vol. 13, no. 10, pp. 3774–3780, 2001. View at Publisher · View at Google Scholar · View at Scopus