Research Article
Fabrication of CNT Dispersion Fluid by Wet-Jet Milling Method for Coating on Bipolar Plate of Fuel Cell
Figure 3
Low magnification SEM images of CNT in the suspension (a) before mixing and (b) after mixing using planetary centrifugal mixer. SEM images of CNT in the dispersion after wet-jet milling process at various processing numbers, (c) 1 time, (d) 4 times, (e) 30 times, and (f) 70 times.
(a) Before mixing |
(b) After mixing |
(c) 1 time |
(d) 4 times |
(e) 30 times |
(f) 70 times |