Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2015, Article ID 631263, 9 pages
http://dx.doi.org/10.1155/2015/631263
Review Article

A Review on Fault Mechanism and Diagnosis Approach for Li-Ion Batteries

1School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin 150001, China
2Department of Electrical Engineering, Luoyang Institute of Science and Technology, Luoyang 471023, China

Received 8 January 2015; Accepted 4 March 2015

Academic Editor: Jiayu Wan

Copyright © 2015 Chao Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Bowkett, K. Thanapalan, T. Stockley, M. Hathway, and J. Williams, “Design and implementation of an optimal battery management system for hybrid electric vehicles,” in Proceedings of the 19th International Conference on Automation and Computing (ICAC '13), pp. 212–216, London, UK, September 2013. View at Scopus
  2. H. F. Dai, X. L. Zhang, X. Z. Wei, Z. Sun, J. Wang, and F. Hu, “Cell-BMS validation with a hardware-in-the-loop simulation of lithium-ion battery cells for electric vehicles,” International Journal of Electrical Power and Energy Systems, vol. 52, no. 1, pp. 174–184, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. W. Waag, S. Käbitz, and D. U. Sauer, “Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application,” Applied Energy, vol. 102, pp. 885–897, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. S. M. Rezvanizaniani, Z. Liu, Y. Chen, and J. Lee, “Review and recent advances in battery health monitoring and prognostics technologies for electric vehicle (EV) safety and mobility,” Journal of Power Sources, vol. 256, pp. 110–124, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Xing, E. W. M. Ma, K.-L. Tsui, and M. Pecht, “An ensemble model for predicting the remaining useful performance of lithium-ion batteries,” Microelectronics Reliability, vol. 53, no. 6, pp. 811–820, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. Q. Miao, L. Xie, H. J. Cui, W. Liang, and M. Pecht, “Remaining useful life prediction of lithium-ion battery with unscented particle filter technique,” Microelectronics Reliability, vol. 53, no. 6, pp. 805–810, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Jin, D. E. Matthews, and Z. Zhou, “A Bayesian framework for on-line degradation assessment and residual life prediction of secondary batteries in spacecraft,” Reliability Engineering and System Safety, vol. 113, no. 1, pp. 7–20, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. V. Yufit, P. Shearing, R. W. Hamilton, P. D. Lee, M. Wu, and N. P. Brandon, “Investigation of lithium-ion polymer battery cell failure using X-ray computed tomography,” Electrochemistry Communications, vol. 13, no. 6, pp. 608–610, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Marino, J. Fullenwarth, L. Monconduit, and B. Lestriez, “Diagnostic of the failure mechanism in NiSb2 electrode for Li battery through analysis of its polarization on galvanostatic cycling,” Electrochimica Acta, vol. 78, pp. 177–182, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. X. D. Liu, C. Z. Chen, Y. Y. Zhao, and B. Jia, “A review on the synthesis of manganese oxide nanomaterials and their applications on lithium-ion batteries,” Journal of Nanomaterials, vol. 2013, Article ID 736375, 7 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Blyr, C. Sigala, G. Amatucci, D. Guyomard, Y. Chabre, and J.-M. Tarascon, “Self-discharge of LiMn2O4/C Li-ion cells in their discharged state: understanding by means of three-electrode measurements,” Journal of the Electrochemical Society, vol. 145, no. 1, pp. 194–209, 1998. View at Publisher · View at Google Scholar · View at Scopus
  12. Z. P. Wang, G. W. Xie, and L. J. Gao, “Electrochemical characterization of Li4Ti5O12/C anode material prepared by starch-sol-assisted rheological phase method for Li-ion battery,” Journal of Nanomaterials, vol. 2012, Article ID 876197, 7 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. J. M. Tarascon, W. R. McKinnon, F. Coowar, T. N. Bowmer, G. Amatucci, and D. Guyomard, “Synthesis conditions and oxygen stoichiometry effects on Li insertion into the spinel LiMn2O4,” Journal of the Electrochemical Society, vol. 141, no. 6, pp. 1421–1431, 1994. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Park, J. H. Seo, G. Plett, W. Lu, and A. M. Sastry, “Numerical simulation of the effect of the dissolution of LiMn2O4 particles on Li-Ion battery performance,” Electrochemical and Solid-State Letters, vol. 14, no. 2, pp. A14–A18, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Christensen and J. Newman, “Cyclable lithium and capacity loss in li-ion cells,” Journal of the Electrochemical Society, vol. 152, no. 4, pp. A818–A829, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. H.-P. Lin, D. Chua, M. Salomon et al., “Low-temperature behavior of Li-ion cells,” Electrochemical and Solid-State Letters, vol. 4, no. 6, pp. 71–73, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Aurbach, E. Zinigrad, Y. Cohen, and H. Teller, “A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions,” Solid State Ionics, vol. 148, no. 3-4, pp. 405–416, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. D. Aurbach, M. D. Levi, E. Levi et al., “Common electroanalytical behavior of Li intercalation processes into graphite and transition metal oxides,” Journal of the Electrochemical Society, vol. 145, no. 9, pp. 3024–3034, 1998. View at Publisher · View at Google Scholar · View at Scopus
  19. M. N. Richard and J. R. Dahn, “Accelerating rate calorimetry study on the thermal stability of lithium intercalated graphite in electrolyte. I. Experimental,” Journal of the Electrochemical Society, vol. 146, no. 6, pp. 2068–2077, 1999. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Abe, H. Fukuda, Y. Iriyama, and Z. Ogumi, “Solvated Li-ion transfer at interface between graphite and electrolyte,” Journal of the Electrochemical Society, vol. 151, no. 8, pp. A1120–A1123, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Wang, X. Guo, S. Greenbaum, J. Liu, and K. Amine, “Solid electrolyte interphase formation on lithium-ion electrodes. A 7Li nuclear magnetic resonance study,” Electrochemical and Solid-State Letters, vol. 4, no. 6, pp. A68–A70, 2001. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Bourlot, P. Blanchard, and S. Robert, “Investigation of aging mechanisms of high power Li-ion cells used for hybrid electric vehicles,” Journal of Power Sources, vol. 196, no. 16, pp. 6841–6846, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. P. Liu, J. Wang, J. Hicks-Garner et al., “Aging Mechanisms of LiFePO4 batteries deduced by electrochemical and structural analyses,” Journal of the Electrochemical Society, vol. 157, no. 4, pp. A499–A507, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. K. Edström, T. Gustafsson, and J. O. Thomas, “The cathode-electrolyte interface in the Li-ion battery,” Electrochimica Acta, vol. 50, no. 2-3, pp. 397–403, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. N. Khare, U. Banasthali, Jaipur, and R. Govil, “A battery storage system for fault tolerance,” in Proceedings of the 29th International Telecommunications Energy Conference, Rome, Italy, September-October 2007.
  26. I. Bloom, B. W. Cole, J. J. Sohn et al., “An accelerated calendar and cycle life study of Li-ion cells,” Journal of Power Sources, vol. 101, no. 2, pp. 238–247, 2001. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Y. Liaw, E. P. Roth, R. G. Jungst, G. Nagasubramanian, H. L. Case, and D. H. Doughty, “Correlation of Arrhenius behaviors in power and capacity fades with cell impedance and heat generation in cylindrical lithium-ion cells,” Journal of Power Sources, vol. 119-121, pp. 874–886, 2003. View at Publisher · View at Google Scholar · View at Scopus
  28. D. Belov and M.-H. Yang, “Failure mechanism of Li-ion battery at overcharge conditions,” Journal of Solid State Electrochemistry, vol. 12, no. 7-8, pp. 885–894, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. D. Belov and M. H. Yang, “Investigation of the kinetic mechanism in overcharge process for Li-ion battery,” Solid State Ionics, vol. 179, no. 27–32, pp. 1816–1821, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Zhao, H. D. Dewald, F. R. Lemke, and R. J. Staniewicz, “Electrochemical stability of graphite-coated copper in lithium-ion battery electrolytes,” Journal of the Electrochemical Society, vol. 147, no. 11, pp. 3983–3988, 2000. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Maleki and J. N. Howard, “Effects of overdischarge on performance and thermal stability of a Li-ion cell,” Journal of Power Sources, vol. 160, no. 2, pp. 1395–1402, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. H.-P. Lin, D. Chua, M. Salomon et al., “Low-temperature behavior of Li-ion cells,” Electrochemical and Solid-State Letters, vol. 4, no. 6, pp. 71–73, 2001. View at Publisher · View at Google Scholar · View at Scopus
  33. P. Ramadass, B. Haran, R. White, and B. N. Popov, “Capacity fade of Sony 18650 cells cycled at elevated temperatures: part II. Capacity fade analysis,” Journal of Power Sources, vol. 112, no. 2, pp. 614–620, 2002. View at Publisher · View at Google Scholar · View at Scopus
  34. D. P. Abraham, E. M. Reynolds, P. L. Schultz, A. N. Jansen, and D. W. Dees, “Temperature dependence of capacity and impedance data from fresh and aged high-power lithium-ion cells,” Journal of the Electrochemical Society, vol. 153, no. 8, pp. A1610–A1616, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. M. Zackrisson, L. Avellán, and J. Orlenius, “Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles—critical issues,” Journal of Cleaner Production, vol. 18, no. 15, pp. 1517–1529, 2010. View at Publisher · View at Google Scholar · View at Scopus
  36. X. B. Han, M. G. Ouyang, L. G. Lu, and J. Q. Li, “Cycle life of commercial lithium-ion batteries with lithium titanium oxide anodes in electric vehicles,” Energies, vol. 7, no. 8, pp. 4895–4909, 2014. View at Publisher · View at Google Scholar
  37. B. Lunz, Z. Yan, J. B. Gerschler, and D. U. Sauer, “Influence of plug-in hybrid electric vehicle charging strategies on charging and battery degradation costs,” Energy Policy, vol. 46, pp. 511–519, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. Z. G. Yang and S. P. Wang, “High cycling performance cathode material: interconnected LiFePO4/Carbon nanoparticles fabricated by sol-gel method,” Journal of Nanomaterials, vol. 2014, Article ID 801562, 7 pages, 2014. View at Publisher · View at Google Scholar
  39. J. C. Arrebola, A. Caballero, L. Hernán, and J. Morales, “Improving the performance of lithium-ion batteries by using spinel nanoparticles,” Journal of Nanomaterials, vol. 2008, Article ID 659397, 10 pages, 2008. View at Publisher · View at Google Scholar
  40. M. Ecker, J. B. Gerschler, J. Vogel et al., “Development of a lifetime prediction model for lithium-ion batteries based on extended accelerated aging test data,” Journal of Power Sources, vol. 215, pp. 248–257, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. Z. Li, Characterization research of LiFePO4 batteries for application on pure electric vehicles [Ph.D. thesis], Tsinghua University, Beijing, China, 2011.
  42. Y. M. Zhang and J. Jiang, “Issues on integration of fault diagnosis and reconfigurable control in active fault-tolerant control systems,” in Proceedings of the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS '06), pp. 1437–1448, Beijing, China, September 2006. View at Scopus
  43. N. Williard, W. He, M. Osterman, and M. Pecht, “Reliability and failure analysis of Lithium Ion batteries for electronic systems,” in Proceedings of the 13th International Conference on Electronic Packaging Technology and High Density Packaging (ICEPT-HDP '12), pp. 1051–1055, Guilin, China, August 2012. View at Publisher · View at Google Scholar · View at Scopus
  44. C. H. Hu and H. L. Xu, Design and Analysis of Fault-Tolerant Control and Fault Diagnosis for Control System, National Defense Industry Press, Beijing, China, 2008.
  45. Z. W. He, M. Y. Gao, C. S. Wang, L. Y. Wang, and Y. Liu, “Adaptive state of charge estimation for Li-ion batteries based on an unscented kalman filter with an enhanced battery model,” Energies, vol. 6, no. 8, pp. 4134–4151, 2013. View at Publisher · View at Google Scholar · View at Scopus
  46. T. C. Kaypmaz and R. N. Tuncay, “An advanced cell model for diagnosing faults in operation of Li-ion polymer batteries,” in Proceedings of the 7th IEEE Vehicle Power and Propulsion Conference (VPPC '11), pp. 1–5, Chicago, Ill, USA, September 2011. View at Publisher · View at Google Scholar · View at Scopus
  47. A. Singh, A. Izadian, and S. Anwar, “Fault diagnosis of Li-Ion batteries using multiple-model adaptive estimation,” in Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON '13), pp. 3524–3529, November 2013. View at Publisher · View at Google Scholar · View at Scopus
  48. S. A. Gadsden and S. R. Habibi, “Model-based fault detection of a battery system in a hybrid electric vehicle,” in Proceedings of the 7th IEEE Vehicle Power and Propulsion Conference (VPPC '11), pp. 1–6, IEEE, Chicago, Ill, USA, September 2011. View at Publisher · View at Google Scholar · View at Scopus
  49. J.-C. Hwang, J.-C. Chen, J.-S. Pan, and Y.-C. Huang, “Measurement method for online battery early faults precaution in uninterrupted power supply system,” IET Electric Power Applications, vol. 5, no. 3, pp. 267–274, 2011. View at Publisher · View at Google Scholar · View at Scopus
  50. U. Tröltzsch, O. Kanoun, and H. R. Tränkler, “Characterizing aging effects of lithium ion batteries by impedance spectroscopy,” Electrochimica Acta, vol. 51, no. 8-9, pp. 1664–1672, 2006. View at Publisher · View at Google Scholar · View at Scopus
  51. J. Kim and B. H. Cho, “An innovative approach for characteristic analysis and state-of-health diagnosis for a Li-ion cell based on the discrete wavelet transform,” Journal of Power Sources, vol. 260, pp. 115–130, 2014. View at Publisher · View at Google Scholar · View at Scopus
  52. A. Banaei and B. Fahimi, “Real time condition monitoring in Li-ion batteries via battery impulse response,” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC '10), pp. 1–6, Lille, France, September 2010. View at Publisher · View at Google Scholar
  53. T. A. Moebes, “Lithium battery analysis: probability of failure assessment using logistic regression,” in Proceedings of the Annual Reliability and Maintainability Symposium (RAMS '11), 5, p. 1, Vista, Fla, USA, January 2011. View at Publisher · View at Google Scholar · View at Scopus
  54. D. Kim, K. H. Koo, J. J. Jeong, T. D. Goh, and S. W. Kim, “Second-order discrete-time sliding mode observer for state of charge determination based on a dynamic resistance Li-ion battery model,” Energies, vol. 6, no. 10, pp. 5538–5551, 2013. View at Publisher · View at Google Scholar · View at Scopus
  55. A. Widodo, M.-C. Shim, W. Caesarendra, and B.-S. Yang, “Intelligent prognostics for battery health monitoring based on sample entropy,” Expert Systems with Applications, vol. 38, no. 9, pp. 11763–11769, 2011. View at Publisher · View at Google Scholar · View at Scopus
  56. J. I. Park, S. H. Baek, M. K. Jeong, and S. J. Bae, “Dual features functional support vector machines for fault detection of rechargeable batteries,” IEEE Transactions on Systems, Man and Cybernetics Part C: Applications and Reviews, vol. 39, no. 4, pp. 480–485, 2009. View at Publisher · View at Google Scholar · View at Scopus
  57. X. J. Liu, Research and application of intelligent battery fault diagnosis system [M.S. dissertation], Beijing University of Posts and Telecommunications, Beijing, China, 2010.
  58. W. J. Liu, Research and implementation of failure diagnosis expert system for battery pack [M.S. thesis], Hunan University, Hunan, China, 2005.
  59. J. R. Wu, Design of remote monitoring system and study on fault diagnosis method for electric vehicle [M.S. thesis], Jilin University, Jilin, China, 2011.
  60. C. H. Hu, R. He, R. C. Wang, and J. B. Yu, “Fault prediction and fault-tolerant of lithium-ion batteries temperature failure for electric vehicle,” in Proceedings of the 3rd International Conference on Digital Manufacturing and Automation (ICDMA '12), pp. 410–413, Guilin, China, August 2012. View at Publisher · View at Google Scholar · View at Scopus
  61. B. Wu, G. J. Offer, V. Yufit, D. A. Howey, and N. P. Brandon, “Fault analysis in battery module design for electric and hybrid vehicles,” in Proceedings of the 6th IET International Conference on Power Electronics, Machines and Drives (PEMD '12), pp. 1–6, IET, Bristol, UK, March 2012. View at Publisher · View at Google Scholar · View at Scopus
  62. J. López, R. Navarro, J. M. Gallego, F. Parres, and S. Ferrándiz, “Failure analysis of automotive battery parts,” Engineering Failure Analysis, vol. 16, no. 7, pp. 2217–2223, 2009. View at Publisher · View at Google Scholar · View at Scopus
  63. Z. Q. Chen, F. Lin, C. S. Wang, Y. L. Wang, and M. Xu, “Active diagnosability of discrete event systems and its application to battery fault diagnosis,” IEEE Transactions on Control Systems Technology, vol. 22, no. 5, pp. 1892–1898, 2014. View at Publisher · View at Google Scholar
  64. L. Ahmadi, M. Fowler, S. B. Young, R. A. Fraser, B. Gaffney, and S. B. Walker, “Energy efficiency of Li-ion battery packs re-used in stationary power applications,” Sustainable Energy Technologies and Assessments, vol. 8, pp. 9–17, 2014. View at Publisher · View at Google Scholar
  65. W. Chen, W.-T. Chen, M. Saif, M.-F. Li, and H. Wu, “Simultaneous fault isolation and estimation of lithium-ion batteries via synthesized design of Luenberger and learning observers,” IEEE Transactions on Control Systems Technology, vol. 22, no. 1, pp. 290–298, 2014. View at Publisher · View at Google Scholar · View at Scopus
  66. S. Buller, M. Thele, R. W. A. A. de Doncker, and E. Karden, “Impedance-based simulation models of supercapacitors and li-ion batteries for power electronic applications,” IEEE Transactions on Industry Applications, vol. 41, no. 3, pp. 742–747, 2005. View at Publisher · View at Google Scholar · View at Scopus
  67. D. Mukoyama, T. Momma, H. Nara, and T. Osaka, “Electrochemical impedance analysis on degradation of commercially available lithium ion battery during chargedischarge cycling,” Chemistry Letters, vol. 41, no. 4, pp. 444–446, 2012. View at Publisher · View at Google Scholar · View at Scopus
  68. D. Andre, A. Nuhic, T. Soczka-Guth, and D. U. Sauer, “Comparative study of a structured neural network and an extended Kalman filter for state of health determination of lithium-ion batteries in hybrid electricvehicles,” Engineering Applications of Artificial Intelligence, vol. 26, no. 3, pp. 951–961, 2013. View at Publisher · View at Google Scholar · View at Scopus