Research Article

Improved Bonding Strength of Hydroxyapatite on Titanium Dioxide Nanotube Arrays following Alkaline Pretreatment for Orthopedic Implants

Figure 3

SEM images of HA coating on different ATi (without 0.5 M NaOH pretreatment) which were anodized under different conditions: (a) at 5°C, +20/−4 V; (b) at 5°C, +35/−4 V; (c) at 25°C, +20/−4 V; and (d) at 25°C, +35/−4 V for 90 minutes. Scale bars are 5 μm. Black arrows represent HA crystal thickness. Inset graphs are thickness analysis of HA using ImageJ. Data are calculated from three SEM images with .
(a)
(b)
(c)
(d)