Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2017 (2017), Article ID 6273095, 14 pages
https://doi.org/10.1155/2017/6273095
Research Article

Effects of Milling pH and Hydrothermal Treatment on Formation of Nanostructured Boehmite Binder for Alumina Extrusion

1Center for Engineering, Modeling and Applied Social Sciences, Federal University of ABC, Av. dos Estados 5001, 09210-580 Santo André, SP, Brazil
2Centro Universitário da FEI, Department of Materials Engineering, Av. Humberto Alencar Castelo Branco 3972, 09850-901 São Bernardo do Campo, SP, Brazil

Correspondence should be addressed to Humberto Naoyuki Yoshimura; rb.ude.cbafu@arumihsoy.otrebmuh

Received 27 March 2017; Accepted 31 May 2017; Published 5 July 2017

Academic Editor: Victor M. Castaño

Copyright © 2017 Maurício Batista de Lima et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Maurício Batista de Lima, Marcela Bergamaschi Tercini, Sydney Ferreira Santos, Fernando dos Santos Ortega, and Humberto Naoyuki Yoshimura, “Effects of Milling pH and Hydrothermal Treatment on Formation of Nanostructured Boehmite Binder for Alumina Extrusion,” Journal of Nanomaterials, vol. 2017, Article ID 6273095, 14 pages, 2017. doi:10.1155/2017/6273095