Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2017, Article ID 6348569, 17 pages
https://doi.org/10.1155/2017/6348569
Research Article

Thermal Stability of Cryomilled Al-Mg-Er Powders

1Department of Mining and Materials Engineering, McGill University, Montreal, QC, Canada H3A 0C5
2Department of Mining, Metallurgical and Materials Engineering, Laval University, Quebec City, QC, Canada G1V 0A6

Correspondence should be addressed to Bamidele Akinrinlola; ac.lligcm.liam@alolnirnika.eledimab

Received 4 May 2017; Accepted 17 August 2017; Published 28 September 2017

Academic Editor: Victor M. Castaño

Copyright © 2017 Bamidele Akinrinlola et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Zhou, J. Lee, and E. J. Lavernia, “Grain growth kinetics of a mechanically milled nanocrystalline Al,” Scripta Materialia, vol. 44, no. 8-9, pp. 2013–2017, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. F. Zhou, J. Lee, S. Dallek, and E. J. Lavernia, “High grain size stability of nanocrystalline Al prepared by mechanical attrition,” Journal of Materials Research, vol. 16, no. 12, pp. 3451–3458, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Zhou, X. Z. Liao, Y. T. Zhu, S. Dallek, and E. J. Lavernia, “Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling,” Acta Materialia, vol. 51, no. 10, pp. 2777–2791, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. V. L. Tellkamp, S. Dallek, D. Cheng, and E. J. Lavernia, “Grain growth behavior of a nanostructured 5083 Al-Mg alloy,” Journal of Materials Research, vol. 16, no. 4, pp. 938–944, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Zhou, Z. Lee, E. J. Lavernia, and S. R. Nutt, “The influence of Sc on thermal stability of a nanocrystalline Al-Mg alloy processed by cryogenic ball milling,” Metallurgical and Materials Transactions A, vol. 36, no. 6, pp. 1587–1594, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Røyset and N. Ryum, “Scandium in aluminium alloys,” International Materials Reviews, vol. 50, no. 1, pp. 19–44, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. Chemicool Periodic Table, 2017, http://www.chemicool.com/.
  8. G.-F. Xu, S.-Z. Mou, J.-J. Yang, T.-N. Jin, Z.-R. Nie, and Z.-M. Yin, “Effect of trace rare earth element Er on Al-Zn-Mg alloy,” Transactions of Nonferrous Metals Society of China, vol. 16, no. 3, pp. 598–603, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. S. P. Wen, Z. B. Xing, H. Huang, B. L. Li, W. Wang, and Z. R. Nie, “The effect of erbium on the microstructure and mechanical properties of Al-Mg-Mn-Zr alloy,” Materials Science and Engineering A, vol. 516, no. 1-2, pp. 42–49, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Gang, L. bolong, L. hongmei, H. hui, and N. zuoren, “Hot deformation behavior of an Al-5.7 wt.% Mg alloy with erbium,” Materials Science and Engineering A, vol. 516, no. 1-2, pp. 131–137, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Lin, Z. Nie, H. Huang, and B. Li, “Annealing behavior of a modified 5083 aluminum alloy,” Materials and Design, vol. 31, no. 3, pp. 1607–1612, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. R. A. Varin, J. Bystrzycki, and A. Calka, “Effect of annealing on the microstructure, ordering and microhardness of ball milled cubic (L12) titanium trialuminide intermetallic powder,” Intermetallics, vol. 7, no. 7, pp. 785–796, 1999. View at Publisher · View at Google Scholar · View at Scopus
  13. D. B. Witkin and E. J. Lavernia, “Synthesis and mechanical behavior of nanostructured materials via cryomilling,” Progress in Materials Science, vol. 51, no. 1, pp. 1–60, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Zhang, J. J. Zhao, and R. L. Zuo, “Microstructure and mechanical properties of micro-alloying modified Al-Mg alloys,” in Proceedings of the International Conference on Power Electronics and Energy Engineering (PEEE '15), pp. 153–156, Hong Kong, China, April 2015. View at Publisher · View at Google Scholar
  15. H. Okamoto, “Al-Mg (aluminum-magnesium),” Journal of Phase Equilibria, vol. 19, no. 6, pp. 598–598, 1998. View at Publisher · View at Google Scholar
  16. C. Goujon, P. Goeuriot, P. Delcroix, and G. Le Caër, “Mechanical alloying during cryomilling of a 5000 Al alloy/AlN powder: the effect of contamination,” Journal of Alloys and Compounds, vol. 315, no. 1-2, pp. 276–283, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Scudino, M. Sakaliyska, K. B. Surreddi, and J. Eckert, “Mechanical alloying and milling of Al-Mg alloys,” Journal of Alloys and Compounds, vol. 483, no. 1-2, pp. 2–7, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. F. Zhou, D. Witkin, S. R. Nutt, and E. J. Lavernia, “Formation of nanostructure in Al produced by a low-energy ball milling at cryogenic temperature,” Materials Science and Engineering A, vol. 375-377, no. 1-2, pp. 917–921, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Zhou, S. R. Nutt, C. C. Bampton, and E. J. Lavernia, “Nanostructure in an Al-Mg-Sc alloy processed by low-energy ball milling at cryogenic temperature,” Metallurgical and Materials Transactions A, vol. 34, no. 9, pp. 1985–1992, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Briggs and M. P. Seah, Practical Surface Analysis, vol. 1, John Wiley & Sons Ltd, Chichester, UK, 2nd edition, 1990.
  21. L. P. H. Jeurgens, W. G. Sloof, F. D. Tichelaar, C. G. Borsboom, and E. J. Mittemeijer, “Determination of thickness and composition of aluminium-oxide overlayers on aluminium substrates,” Applied Surface Science, vol. 144-145, no. 0, pp. 11–15, 1999. View at Publisher · View at Google Scholar · View at Scopus
  22. M. R. Alexander, G. E. Thompson, X. Zhou, G. Beamson, and N. Fairley, “Quantification of oxide film thickness at the surface of aluminium using XPS,” Surface and Interface Analysis, vol. 34, no. 1, pp. 485–489, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Schoenitz and E. Dreizin, “Oxidation processes and phase changes in metastable Al-Mg alloys,” Journal of Propulsion and Power, vol. 20, no. 6, pp. 1064–1068, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. D. J. Field, G. M. Scamans, and E. P. Butler, “The high temperature oxidation of Al-4.2 wt pct Mg alloy,” Metallurgical Transactions A, vol. 18, no. 4, pp. 463–472, 1987. View at Publisher · View at Google Scholar
  25. P.-C. Chen, T.-S. Shih, and C.-Y. Wu, “Thermally formed oxides on A1-2 and 3.5 mass% Mg alloys heated and held in different gases,” Materials Transactions, vol. 50, no. 10, pp. 2366–2372, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. B. B. Straumal, B. Baretzky, A. A. Mazilkin et al., “Formation of nanograined structure and decomposition of supersaturated solid solution during high pressure torsion of Al-Zn and Al-Mg alloys,” Acta Materialia, vol. 52, no. 15, pp. 4469–4478, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. X. Sauvage, N. Enikeev, R. Valiev, Y. Nasedkina, and M. Murashkin, “Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy,” Acta Materialia, vol. 72, pp. 125–136, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. G. K. Rane, D. Apel, U. Welzel, and E. J. Mittemeijer, “The microstructural evolution and thermal stability of nanocrystalline ball-milled Ni-15 at.% W powder,” Journal of Materials Research, vol. 28, no. 6, pp. 873–886, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. E. A. Marquis and D. N. Seidman, “Nanostructural evolution of Al3Sc precipitates in an Al-Sc-Mg alloy by three-dimensional atom probe microscopy,” Surface and Interface Analysis, vol. 36, no. 5-6, pp. 559–563, 2004. View at Publisher · View at Google Scholar · View at Scopus
  30. M. J. Starink and A.-M. Zahra, “Low-temperature decomposition of Al-Mg alloys: Guinier-preston zones and Ll2 ordered precipitates,” Philosophical Magazine A, vol. 76, no. 3, pp. 701–714, 1997. View at Publisher · View at Google Scholar · View at Scopus
  31. M. J. Starink and A.-M. Zahra, “β′ and β precipitation in an Al-Mg alloy studied by DSC and TEM,” Acta Materialia, vol. 46, no. 10, pp. 3381–3397, 1998. View at Publisher · View at Google Scholar · View at Scopus
  32. T. J. Harrell, T. D. Topping, H. Wen, T. Hu, J. M. Schoenung, and E. J. Lavernia, “Microstructure and strengthening mechanisms in an ultrafine grained Al-Mg-Sc alloy produced by powder metallurgy,” Metallurgical and Materials Transactions A, vol. 45, no. 13, pp. 6329–6343, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Shaw, H. Luo, J. Villegas, and D. Miracle, “Thermal stability of nanostructured Al93Fe3Cr2Ti2 alloys prepared via mechanical alloying,” Acta Materialia, vol. 51, no. 9, pp. 2647–2663, 2003. View at Publisher · View at Google Scholar · View at Scopus
  34. I. Roy, M. Chauhan, E. J. Lavernia, and F. A. Mohamed, “Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy,” Metallurgical and Materials Transactions A, vol. 37, no. 3, pp. 721–730, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. M. J. Starink, “Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics,” International Materials Reviews, vol. 49, no. 3-4, pp. 191–226, 2004. View at Publisher · View at Google Scholar · View at Scopus
  36. H. A. Murdoch and C. A. Schuh, “Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design,” Journal of Materials Research, vol. 28, no. 16, pp. 2154–2163, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. K. A. Darling, M. A. Tschopp, B. K. Vanleeuwen, M. A. Atwater, and Z. K. Liu, “Mitigating grain growth in binary nanocrystalline alloys through solute selection based on thermodynamic stability maps,” Computational Materials Science, vol. 84, pp. 255–266, 2014. View at Publisher · View at Google Scholar · View at Scopus
  38. M. E. van Dalen, R. A. Karnesky, J. R. Cabotaje, D. C. Dunand, and D. N. Seidman, “Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates,” Acta Materialia, vol. 57, no. 14, pp. 4081–4089, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. C. S. Smith, “Grains, phases and interfaces: an interpretation of microstructure,” Transactions of AIME, vol. 175, pp. 15–51, 1948, https://link.springer.com/article/10.1007%2Fs11661-010-0215-5. View at Google Scholar
  40. M. J. Luton, C. S. Jayanth, M. M. Disko, S. Matras, and J. Vallone, “Cryomilling of nano-phase dispersion strengthened aluminum,” MRS Proceedings, vol. 132, pp. 79–86, 1988. View at Publisher · View at Google Scholar
  41. O. Susegg, E. Hellum, A. Olsen, and M. J. Luton, “HREM study of dispersoids in cryomilled oxide dispersion strengthened materials,” Philosophical Magazine A, vol. 68, no. 2, pp. 367–380, 1993. View at Publisher · View at Google Scholar · View at Scopus