Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2017, Article ID 6825250, 10 pages
https://doi.org/10.1155/2017/6825250
Research Article

Enhancement of the Pitting Corrosion Resistance of AISI 316LVM Steel with Ta-Hf-C/Au Bilayers for Biomedical Applications

1School of Engineering, Universidad Militar Nueva Granada, Carrera 11, No. 101-80, 49300 Bogotá, Colombia
2CIC biomaGUNE, Paseo Miramón 182, 20009 Donostia, Spain

Correspondence should be addressed to Luis Yate; se.enugamoibcic@etayl

Received 16 October 2016; Revised 13 December 2016; Accepted 29 December 2016; Published 17 January 2017

Academic Editor: Albano Cavaleiro

Copyright © 2017 Pablo Guzmán et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Ramakrishna, M. Ramalingam, T. S. S. Kumar, and W. O. Soboyejo, Biomaterials: A Nano Approach, CRC Press, Boca Raton, Fla, USA, 2010. View at Publisher · View at Google Scholar
  2. F.-M. Chen and X. Liu, “Advancing biomaterials of human origin for tissue engineering,” Progress in Polymer Science, vol. 53, pp. 86–168, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. R. J. Miron and D. D. Bosshardt, “OsteoMacs: key players around bone biomaterials,” Biomaterials, vol. 82, pp. 1–19, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Arcos, A. R. Boccaccini, M. Bohner et al., “The relevance of biomaterials to the prevention and treatment of osteoporosis,” Acta Biomaterialia, vol. 10, no. 5, pp. 1793–1805, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Sirova, “Assessing immunological properties of biomaterials for bone regeneration applications,” in Biomaterials for Bone Regeneration, P. Dubruel and V. Vlierberghe, Eds., pp. 324–348, Elsevier, Sawston, UK, 2014. View at Google Scholar
  6. F. R. Maia, S. J. Bidarra, P. L. Granja, and C. C. Barrias, “Functionalization of biomaterials with small osteoinductive moieties,” Acta Biomaterialia, vol. 9, no. 11, pp. 8773–8789, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Chen, T. Klein, R. Z. Murray et al., “Osteoimmunomodulation for the development of advanced bone biomaterials,” Materials Today, vol. 19, no. 6, pp. 304–321, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Sak, T. Moskalewicz, S. Zimowski et al., “Influence of polyetheretherketone coatings on the Ti-13Nb-13Zr titanium alloy's bio-tribological properties and corrosion resistance,” Materials Science and Engineering C, vol. 63, pp. 52–61, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Zhou, Q. Wei, Q. Li, B. Jiang, Y. Chen, and Y. Sun, “Development of Co-based bulk metallic glasses as potential biomaterials,” Materials Science and Engineering C, vol. 69, pp. 46–51, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. L. Yate, L. E. Coy, D. Gregurec, W. Aperador, S. E. Moya, and G. Wang, “Nb-C nanocomposite films with enhanced biocompatibility and mechanical properties for hard-tissue implant applications,” ACS Applied Materials and Interfaces, vol. 7, no. 11, pp. 6351–6358, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Esguerra-Arce, J. Esguerra-Arce, L. Yate et al., “Influence of the Al content on the: in vitro bioactivity and biocompatibility of PVD Ti1- xAlxN coatings for orthopaedic applications,” RSC Advances, vol. 6, no. 65, pp. 60756–60764, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. X. Xing, H. Wang, P. Lu, and Z. Han, “Influence of rare earths on electrochemical corrosion and wear resistance of RE-Cr/Ti pack coatings on cemented 304 stainless steel,” Surface and Coatings Technology, vol. 291, pp. 151–160, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Zhou, Y. Zhu, X. Li et al., “Surface functionalization of biomaterials by radical polymerization,” Progress in Materials Science, vol. 83, pp. 191–235, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Liu, G. Wang, H. Li, S. Pang, K. Chen, and T. Zhang, “Ti-Cu-Zr-Fe-Sn-Si-Sc bulk metallic glasses with good mechanical properties for biomedical applications,” Journal of Alloys and Compounds, vol. 679, pp. 341–349, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Li, Q. Wei, Q. Li, B. Jiang, Y. Chen, and Y. Sun, “Development of Fe-based bulk metallic glasses as potential biomaterials,” Materials Science and Engineering C, vol. 52, pp. 235–241, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. Q. Chen and G. A. Thouas, “Metallic implant biomaterials,” Materials Science and Engineering R: Reports, vol. 87, pp. 1–57, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Choudhury, J. M. Lackner, L. Major et al., “Improved wear resistance of functional diamond like carbon coated Ti–6Al–4V alloys in an edge loading conditions,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 59, pp. 586–595, 2016. View at Publisher · View at Google Scholar
  18. B. Rahmati, A. A. D. Sarhan, W. J. Basirun, and W. A. B. W. Abas, “Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy,” Journal of Alloys and Compounds, vol. 676, pp. 369–376, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. Q. Zhao, M. Chen, R. He, Z. Zhang, and M. A. Ashraf, “Review on antibacterial characteristics of bridge engineering biomaterials,” Saudi Journal of Biological Sciences, vol. 23, no. 1, pp. S137–S141, 2016. View at Publisher · View at Google Scholar
  20. A. Mahapatro, “Bio-functional nano-coatings on metallic biomaterials,” Materials Science and Engineering C, vol. 55, pp. 227–251, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Matsuno, A. Yokoyama, F. Watari, M. Uo, and T. Kawasaki, “Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium,” Biomaterials, vol. 22, no. 11, pp. 1253–1262, 2001. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. X. Leng, H. Sun, P. Yang et al., “Biomedical properties of tantalum nitride films synthesized by reactive magnetron sputtering,” Thin Solid Films, vol. 398-399, pp. 471–475, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. P. S. Nnamchi, C. S. Obayi, I. Todd, and M. W. Rainforth, “Mechanical and electrochemical characterisation of new Ti-Mo-Nb-Zr alloys for biomedical applications,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 60, pp. 68–77, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Xu, W. Hu, Z.-H. Xie, and P. Munroe, “Reactive-sputter-deposited β-Ta2O5 and TaON nanoceramic coatings on Ti-6Al-4V alloy against wear and corrosion damage,” Surface and Coatings Technology, vol. 296, pp. 171–184, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. Li, T. Zhao, S. Wei, Y. Xiang, and H. Chen, “Effect of Ta2O5/TiO2 thin film on mechanical properties, corrosion and cell behavior of the NiTi alloy implanted with tantalum,” Materials Science and Engineering C, vol. 30, no. 8, pp. 1227–1235, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. F. Marco, F. Milena, G. Gianluca, and O. Vittoria, “Peri-implant osteogenesis in health and osteoporosis,” Micron, vol. 36, no. 7-8, pp. 630–644, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. P. Stenlund, O. Omar, U. Brohede et al., “Bone response to a novel Ti-Ta-Nb-Zr alloy,” Acta Biomaterialia, vol. 20, pp. 165–175, 2015. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Marciniak, J. Szewczenko, and W. Kajzer, “Surface modification of implants for bone surgery,” Archives of Metallurgy and Materials, vol. 60, no. 3B, pp. 2123–2129, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Liu, Y. Leng, and N. Huang, “Corrosion resistance of Ti-O film modified 316L stainless steel coronary stents in vitro,” Journal of Materials Engineering and Performance, vol. 21, no. 3, pp. 424–428, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Guo, A. Toloei, and H. H. Rotermund, “The effect of surface patterning on corrosion resistance of biomedical devices,” Journal of Materials Engineering and Performance, vol. 25, no. 10, pp. 4190–4198, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Basiaga, R. Jendruś, W. Walke, Z. Paszenda, M. Kaczmarek, and M. Popczyk, “Influence of Surface Modification on Properties of Stainless Steel Used for Implants / Wpływ Modyfikacji Powierzchni Na Właściwości Stali Nierdzewnej Stosowanej Na Implanty,” Archives of Metallurgy and Materials, vol. 60, no. 4, 2015. View at Publisher · View at Google Scholar
  32. H. Lasfargues, T. Glechner, C. Koller et al., “Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings,” Surface and Coatings Technology, vol. 309, pp. 436–444, 2017. View at Publisher · View at Google Scholar
  33. W. Shuo, Z. Kan, A. Tao et al., “Structure, mechanical and tribological properties of HfCx films deposited by reactive magnetron sputtering,” Applied Surface Science, vol. 327, pp. 68–76, 2015. View at Publisher · View at Google Scholar · View at Scopus
  34. O. Y. Khyzhun, “XPS, XES, and XAS studies of the electronic structure of substoichiometric cubic TaCx and hexagonal Ta2Cy carbides,” Journal of Alloys and Compounds, vol. 259, no. 1-2, pp. 47–58, 1997. View at Publisher · View at Google Scholar · View at Scopus
  35. L. Reclaru, H. Lüthy, P.-Y. Eschler, A. Blatter, and C. Susz, “Corrosion behaviour of cobalt-chromium dental alloys doped with precious metals,” Biomaterials, vol. 26, no. 21, pp. 4358–4365, 2005. View at Publisher · View at Google Scholar · View at Scopus
  36. D. Ferro, J. V. Rau, V. Rossi Albertini, A. Generosi, R. Teghil, and S. M. Barinov, “Pulsed laser deposited hard TiC, ZrC, HfC and TaC films on titanium: hardness and an energy-dispersive X-ray diffraction study,” Surface and Coatings Technology, vol. 202, no. 8, pp. 1455–1461, 2008. View at Publisher · View at Google Scholar · View at Scopus