Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2017, Article ID 9689035, 9 pages
https://doi.org/10.1155/2017/9689035
Research Article

Functional Surface Coating on Cellulosic Flexible Substrates with Improved Water-Resistant and Antimicrobial Properties by Use of ZnO Nanoparticles

1School of Bioscience and Bioengineering, South China University of Technology, Guangzhou 510640, China
2Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, College of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
3State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China
4Collaborative Innovation Center for Guangxi Sugar Industry, Guangxi, Nanning 530004, China

Correspondence should be addressed to Zhiwei Wang; nc.ude.uxg@iewihzgnaw

Received 28 October 2016; Accepted 14 December 2016; Published 19 January 2017

Academic Editor: Siya Huang

Copyright © 2017 Xiaofei Tian et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Liu, T. Yu, Y. Wu, W. Li, and B. Li, “Evolution of cellulose into flexible conductive green electronics: a smart strategy to fabricate sustainable electrodes for supercapacitors,” RSC Advances, vol. 4, no. 64, pp. 34134–34143, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. H. Jung, T.-H. Chang, H. Zhang et al., “High-performance green flexible electronics based on biodegradable cellulose nanofibril paper,” Nature Communications, vol. 6, article 7170, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. H. G. de Oliveira Barud, R. R. da Silva, H. da Silva Barud et al., “A multipurpose natural and renewable polymer in medical applications: bacterial cellulose,” Carbohydrate Polymers, vol. 153, pp. 406–420, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. H. P. S. Abdul Khalil, Y. Davoudpour, C. K. Saurabh et al., “A review on nanocellulosic fibres as new material for sustainable packaging: process and applications,” Renewable and Sustainable Energy Reviews, vol. 64, pp. 823–836, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Vasiljević, B. Tomšič, I. Jerman, B. Orel, G. Jakša, and B. Simončič, “Novel multifunctional water- and oil-repellent, antibacterial, and flame-retardant cellulose fibres created by the sol-gel process,” Cellulose, vol. 21, no. 4, pp. 2611–2623, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Vasiljević, M. Gorjanc, B. Tomšič et al., “The surface modification of cellulose fibres to create super-hydrophobic, oleophobic and self-cleaning properties,” Cellulose, vol. 20, no. 1, pp. 277–289, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Garcia-Ubasart, J. F. Colom, C. Vila, N. G. Hernández, M. Blanca Roncero, and T. Vidal, “A new procedure for the hydrophobization of cellulose fibre using laccase and a hydrophobic phenolic compound,” Bioresource Technology, vol. 112, pp. 341–344, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Thakur, S. Kalia, B. S. Kaith et al., “The development of antibacterial and hydrophobic functionalities in natural fibers for fiber-reinforced composite materials,” Journal of Environmental Chemical Engineering, vol. 4, no. 2, pp. 1743–1752, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Thakur, S. Kalia, D. Pathania, A. Kumar, N. Sharma, and C. L. Schauer, “Surface functionalization of lignin constituent of coconut fibers via laccase-catalyzed biografting for development of antibacterial and hydrophobic properties,” Journal of Cleaner Production, vol. 113, pp. 176–182, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. Z. A. Raza, A. Rehman, M. Mohsin et al., “Development of antibacterial cellulosic fabric via clean impregnation of silver nanoparticles,” Journal of Cleaner Production, vol. 101, pp. 377–386, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Shateri-Khalilabad and M. E. Yazdanshenas, “One-pot sonochemical synthesis of superhydrophobic organic-inorganic hybrid coatings on cotton cellulose,” Cellulose, vol. 20, no. 6, pp. 3039–3051, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. N. R. Dhineshbabu, P. Manivasakan, A. Karthik, and V. Rajendran, “Hydrophobicity, flame retardancy and antibacterial properties of cotton fabrics functionalised with MgO/methyl silicate nanocomposites,” RSC Advances, vol. 4, no. 61, pp. 32161–32173, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. P. Samyn, “Wetting and hydrophobic modification of cellulose surfaces for paper applications,” Journal of Materials Science, vol. 48, no. 19, pp. 6455–6498, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. H.-B. Jo, J. Choi, K.-J. Byeon, H.-J. Choi, and H. Lee, “Superhydrophobic and superoleophobic surfaces using ZnO nano-in-micro hierarchical structures,” Microelectronic Engineering, vol. 116, pp. 51–57, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Ogihara, J. Xie, J. Okagaki, and T. Saji, “Simple method for preparing superhydrophobic paper: spray-deposited hydrophobic silica nanoparticle coatings exhibit high water-repellency and transparency,” Langmuir, vol. 28, no. 10, pp. 4605–4608, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Ebert and B. Bhushan, “Transparent, superhydrophobic, and wear-resistant coatings on glass and polymer substrates using SiO2, ZnO, and ITO nanoparticles,” Langmuir, vol. 28, no. 31, pp. 11391–11399, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Gonçalves, P. A. A. P. Marques, T. Trindade, C. P. Neto, and A. Gandini, “Superhydrophobic cellulose nanocomposites,” Journal of Colloid and Interface Science, vol. 324, no. 1-2, pp. 42–46, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Li, Z. Jing, F. Zha, Y. Yang, Q. Wang, and Z. Lei, “Facile spray-coating process for the fabrication of tunable adhesive superhydrophobic surfaces with heterogeneous chemical compositions used for selective transportation of microdroplets with different volumes,” ACS Applied Materials and Interfaces, vol. 6, no. 11, pp. 8868–8877, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. V. Chaurasia, N. Chand, and S. K. Bajpai, “Water sorption properties and antimicrobial action of zinc oxide nanoparticles-loaded cellulose acetate films,” Journal of Macromolecular Science Part A: Pure and Applied Chemistry, vol. 47, no. 4, pp. 309–317, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Fu, L. Li, L. Liu et al., “Construction of cellulose based ZnO nanocomposite films with antibacterial properties through one-step coagulation,” ACS Applied Materials & Interfaces, vol. 7, no. 4, pp. 2597–2606, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. N. C. T. Martins, C. S. R. Freire, C. P. Neto et al., “Antibacterial paper based on composite coatings of nanofibrillated cellulose and ZnO,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 417, pp. 111–119, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Applerot, J. Lellouche, N. Perkas, Y. Nitzan, A. Gedanken, and E. Banin, “ZnO nanoparticle-coated surfaces inhibit bacterial biofilm formation and increase antibiotic susceptibility,” RSC Advances, vol. 2, no. 6, pp. 2314–2321, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. K. Han, Z. H. Zhao, Z. Xiang, C. Wang, J. Zhang, and B. Yang, “The sol–gel preparation of ZnO/silica core–shell composites and hollow silica structure,” Materials Letters, vol. 61, no. 2, pp. 363–368, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Joshi, S. Chakraborti, P. Chakrabarti et al., “Role of surface adsorbed anionic species in antibacterial activity of ZnO quantum dots against Escherichia coli,” Journal of Nanoscience and Nanotechnology, vol. 9, no. 11, pp. 6427–6433, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. A. B. Gurav, S. S. Latthe, R. S. Vhatkar et al., “Superhydrophobic surface decorated with vertical ZnO nanorods modified by stearic acid,” Ceramics International, vol. 40, no. 5, pp. 7151–7160, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Wang, B. Li, and C. Xu, “Fabrication of superhydrophobic surface of hierarchical ZnO thin films by using stearic acid,” Superlattices and Microstructures, vol. 51, no. 1, pp. 128–134, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. T. K. Sontakke, R. N. Jagtap, A. Singh, and D. C. Kothari, “Nano ZnO grafted on MAA/BA/MMA copolymer: an additive for hygienic coating,” Progress in Organic Coatings, vol. 74, no. 3, pp. 582–588, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. T. J. Athauda, R. R. Ozer, and J. M. Chalker, “Investigation of cotton functionalized with ZnO nanorods and its interaction with E. coli,” RSC Advances, vol. 3, no. 27, pp. 10662–10665, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. P. Lu, X. Tian, Y. Liu, and Z. Wang, “Effects of cellulosic base sheet pore structure and soybean oil-based polymer layer on cellulosic packaging performance as a barrier for water and water vapor,” BioResources, vol. 11, no. 4, pp. 8483–8495, 2016. View at Google Scholar
  30. M. Yu, Z. Wang, H. Liu et al., “Laundering durability of photocatalyzed self-cleaning cotton fabric with TiO2 nanoparticles covalently immobilized,” ACS Applied Materials & Interfaces, vol. 5, no. 9, pp. 3697–3703, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. M. He, H. Xiao, Y. Zhou, and P. Lu, “Synthesis, characterization and antimicrobial activities of water-soluble amphiphilic copolymers containing ciprofloxacin and quaternary ammonium salts,” Journal of Materials Chemistry B, vol. 3, no. 18, pp. 3704–3713, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. M. Ma and R. M. Hill, “Superhydrophobic surfaces,” Current Opinion in Colloid & Interface Science, vol. 11, no. 4, pp. 193–202, 2006. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Marquez, B. P. Grady, and I. Robb, “Different methods for surface modification of hydrophilic particulates with polymers,” Colloids & Surfaces A: Physicochemical & Engineering Aspects, vol. 266, no. 1–3, pp. 18–31, 2005. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Lu, H. Xiao, W. Zhang, and G. Gong, “Reactive coating of soybean oil-based polymer on nanofibrillated cellulose film for water vapor barrier packaging,” Carbohydrate Polymers, vol. 111, pp. 524–529, 2014. View at Publisher · View at Google Scholar · View at Scopus
  35. S. Çolak and S. H. Küsefoğlu, “Synthesis and interfacial properties of aminosilane derivative of acrylated epoxidized soybean oil,” Journal of Applied Polymer Science, vol. 104, no. 4, pp. 2244–2253, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. H.-M. Kim, H.-R. Kim, and B. S. Kim, “Soybean oil-based photo-crosslinked polymer networks,” Journal of Polymers and the Environment, vol. 18, no. 3, pp. 291–297, 2010. View at Publisher · View at Google Scholar · View at Scopus
  37. E. Bormashenko, “Progress in understanding wetting transitions on rough surfaces,” Advances in Colloid and Interface Science, vol. 222, pp. 92–103, 2015. View at Publisher · View at Google Scholar · View at Scopus
  38. T. P. N. Nguyen, R. Boukherroub, V. Thomy, and Y. Coffinier, “Micro-and nanostructured silicon-based superomniphobic surfaces,” Journal of Colloid and Interface Science, vol. 416, pp. 280–288, 2014. View at Publisher · View at Google Scholar · View at Scopus
  39. N. J. Shirtcliffe, G. McHale, S. Atherton, and M. I. Newton, “An introduction to superhydrophobicity,” Advances in Colloid and Interface Science, vol. 161, no. 1-2, pp. 124–138, 2010. View at Publisher · View at Google Scholar · View at Scopus
  40. D. E. Weibel, A. F. Michels, A. F. Feil, L. Amaral, S. R. Teixeira, and F. Horowitz, “Adjustable hydrophobicity of Al substrates by chemical surface functionalization of nano/microstructures,” The Journal of Physical Chemistry C, vol. 114, no. 31, pp. 13219–13225, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. V. B. Schwartz, F. Thétiot, S. Ritz et al., “Antibacterial surface coatings from zinc oxide nanoparticles embedded in poly(N-isopropylacrylamide) hydrogel surface layers,” Advanced Functional Materials, vol. 22, no. 11, pp. 2376–2386, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. M. Li, L. Zhu, and D. Lin, “Toxicity of ZnO nanoparticles to Escherichia coli: mechanism and the influence of medium components,” Environmental Science & Technology, vol. 45, no. 5, pp. 1977–1983, 2011. View at Publisher · View at Google Scholar · View at Scopus
  43. J. T. Seil and T. J. Webster, “Antimicrobial applications of nanotechnology: methods and literature,” International Journal of Nanomedicine, vol. 7, no. 1, pp. 2767–2781, 2012. View at Publisher · View at Google Scholar · View at Scopus
  44. M. Ramani, S. Ponnusamy, and C. Muthamizhchelvan, “From zinc oxide nanoparticles to microflowers: a study of growth kinetics and biocidal activity,” Materials Science and Engineering C, vol. 32, no. 8, pp. 2381–2389, 2012. View at Publisher · View at Google Scholar · View at Scopus