Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2017, Article ID 9702384, 6 pages
https://doi.org/10.1155/2017/9702384
Research Article

An Accurate PSO-GA Based Neural Network to Model Growth of Carbon Nanotubes

1Department of Engineering, Macquarie University, Sydney, NSW 2109, Australia
2School of Engineering, Deakin University, Waurn Ponds, VIC 3125, Australia
3School of Biomedical Engineering, University of Technology, Sydney, NSW 2007, Australia

Correspondence should be addressed to Mohsen Asadnia; ua.ude.qm@aindasa.neshom

Received 12 April 2017; Revised 10 July 2017; Accepted 25 July 2017; Published 6 September 2017

Academic Editor: Yasuhiko Hayashi

Copyright © 2017 Mohsen Asadnia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Bosnick, S. Ban, W. Hiebert et al., “Organic vapor adsorption on in situ grown carbon nanotube films,” Carbon, vol. 49, no. 11, pp. 3639–3644, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. H. C. Prasad, S. A. R. Hashmi, A. Naik, and H. N. Bhargaw, “Improved shape memory effects in multiwalled-carbon-nano-tube reinforced thermosetting polyurethane composites,” Journal of Applied Polymer Science, vol. 134, no. 7, Article ID 44389, 2017. View at Publisher · View at Google Scholar · View at Scopus
  3. R. M. Ton, D. Munteanu, and G. C. Cocina, “Concept of artificial neural network (ANN) and its application in cerebral aneurism with multi walls carbon nanotubes (MWCNT),” in Proceedings of The 10th Wseas International Conference on Neural Networks, 2009.
  4. S. Yamacli and M. Avci, “Neural network modeling of voltage-dependent resistance of metallic carbon nanotube interconnects: An ab initio study,” Expert Systems with Applications, vol. 37, no. 12, pp. 8014–8018, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Zarei, A. R. Khataee, R. Ordikhani-Seyedlar, and M. Fathinia, “Photoelectro-Fenton combined with photocatalytic process for degradation of an azo dye using supported TiO2 nanoparticles and carbon nanotube cathode: neural network modeling,” Electrochimica Acta, vol. 55, no. 24, pp. 7259–7265, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Zarei, A. Niaei, D. Salari, and A. R. Khataee, “Removal of four dyes from aqueous medium by the peroxi-coagulation method using carbon nanotube-PTFE cathode and neural network modeling,” Journal of Electroanalytical Chemistry, vol. 639, no. 1-2, pp. 167–174, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Farahnakian, M. R. Razfar, M. Moghri, and M. Asadnia, “The selection of milling parameters by the PSO-based neural network modeling method,” International Journal of Advanced Manufacturing Technology, vol. 57, no. 1-4, pp. 49–60, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. G. S. Carmantini, P. beim Graben, M. Desroches, and S. Rodrigues, “A modular architecture for transparent computation in recurrent neural networks,” Neural Networks, vol. 85, pp. 85–105, 2017. View at Publisher · View at Google Scholar · View at Scopus
  9. M. R. Razfar, M. Asadnia, M. Haghshenas, and M. Farahnakian, “Optimum surface roughness prediction in face milling X20Cr13 using particle swarm optimization algorithm,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 224, no. 11, pp. 1645–1653, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Sinha, P. Malo, and K. Deb, “Evolutionary algorithm for bilevel optimization using approximations of the lower level optimal solution mapping,” European Journal of Operational Research, vol. 257, no. 2, pp. 395–411, 2017. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  11. T. Bhoskar, O. K. Kulkarni, N. K. Kulkarni, S. L. Patekar, G. M. Kakandikar, and V. M. Nandedkar, “Genetic Algorithm and its Applications to Mechanical Engineering: A Review,” pp. 2624–2630. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Asadnia, L. H. C. Chua, X. S. Qin, and A. Talei, “Improved particle swarm optimization-based artificial neural network for Rainfall-Runoff modeling,” Journal of Hydrologic Engineering, vol. 19, no. 7, pp. 1320–1329, 2014. View at Publisher · View at Google Scholar
  13. M. R. Soleymani Yazdi, M. R. Razfar, and M. Asadnia, “Using particle swarm optimization based neural network for modeling of thrust force drilling of PA-6/ Nanoclay Nanocomposites,” Applied Mechanics and Materials, vol. 34-35, pp. 722–726, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. A. M. Khorasani, M. Asadnia, and P. Saadatkia, “Modeling of TiC-N Thin Film Coating Process on Drills Using Particle Swarm Optimization Algorithm,” Arabian Journal for Science and Engineering, vol. 38, no. 6, pp. 1565–1571, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Das, P. K. Pattnaik, and S. K. Padhy, “Artificial Neural Network trained by Particle Swarm Optimization for non-linear channel equalization,” Expert Systems with Applications, vol. 41, no. 7, pp. 3491–3496, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Xu, J. Miao, H. Li, and Z. Wang, “Local synthesis of aligned carbon nanotube bundle arrays by using integrated micro-heaters for interconnect applications,” Nanotechnology, vol. 20, no. 29, Article ID 295303, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. T. Xu, Z. Wang, J. Miao, X. Chen, and C. M. Tan, “Aligned carbon nanotubes for through-wafer interconnects,” Applied Physics Letters, vol. 91, no. 4, Article ID 042108, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. M. R. Soleymani Yazdi, M. R. Razfar, and M. Asadnia, “Modelling of the thrust force of the drilling operation on PA6-nanoclay nanocomposites using particle swarm optimization,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 225, no. 10, pp. 1757–1771, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Lu, J. Miao, T. Xu, B. Yan, T. Yu, and Z. Shen, “Erratum: Growth of horizontally aligned dense carbon nanotubes from trench sidewalls (Nanotechnology (2011) 22 (265614)),” Nanotechnology, vol. 22, no. 47, Article ID 479502, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Ohashi, G. Y. Chen, V. Stolojan, and S. R. P. Silva, “The role of the gas species on the formation of carbon nanotubes during thermal chemical vapour deposition,” Nanotechnology, vol. 19, no. 44, Article ID 445605, 2008. View at Publisher · View at Google Scholar · View at Scopus