Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2018, Article ID 8082502, 9 pages
https://doi.org/10.1155/2018/8082502
Research Article

Effect of Metal (Mn, Ti) Doping on NCA Cathode Materials for Lithium Ion Batteries

1School of Environmental, Urban and Chemical Engineering, Chungbuk National University, 1 Chungdae-ro, Seowon-Gu, Cheongju, Chungbuk 28644, Republic of Korea
2Key Laboratory of Automobile Materials, Ministry of Education, College of Materials Science and Engineering, Jilin University, Changchun 130022, China

Correspondence should be addressed to En Mei Jin; moc.revan@eijuk and Sang Mun Jeong; rk.ca.kubgnuhc@gnoejms

Received 25 September 2017; Revised 5 December 2017; Accepted 24 December 2017; Published 30 January 2018

Academic Editor: Bhanu P. Singh

Copyright © 2018 Dao Yong Wan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Fu and A. Manthiram, “Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries,” RSC Advances, vol. 2, pp. 5927–5929, 2012. View at Publisher · View at Google Scholar
  2. M. S. Whittingham, “Lithium batteries and cathode materials,” Chemical Review, vol. 10, pp. 4271–4302, 2004. View at Publisher · View at Google Scholar
  3. N. Leifer, O. Srur-Lavi, I. Matlahov, B. Markovsky, D. Aurbach, and G. Goobes, “LiNi0.8Co0.15Al0.05O2 Cathode material: new Insights via 7Li and 27Al magic-angle spinning NMR spectroscopy,” Chemistry of Materials, vol. 28, no. 21, pp. 7594–7604, 2016. View at Publisher · View at Google Scholar
  4. E. M. Jin, G. E. Lee, B. K. Na, and S. M. Jeong, “Electrochemical properties of commercial NCA Cathode materials for high capacity of lithium ion battery,” Korean Chemical Engineering Research, vol. 55, pp. 163–169, 2017. View at Publisher · View at Google Scholar
  5. F. chipper, E. M. Erickson, C. Erk, J. Y. Shin, F. F. Chesneau, and D. Aurbacha, “Review—recent advances and remaining challenges for lithium ion battery CathodesI. Nickel-Rich, LiNixCoyMnzO2,” Journal of The Electrochemical Society, vol. 164, no. 1, pp. A6220–A6228, 2017. View at Publisher · View at Google Scholar
  6. D. L. Vu and J. W. Lee, “Properties of LiNi0.8Co0.1Mn0.1O2 as a high energy cathode material for lithium-ion batteries,” Korean Journal of Chemical Engineering, vol. 33, no. 2, pp. 514–526, 2016. View at Publisher · View at Google Scholar
  7. J. Y. Lee, S. H. Shin, and S. H. Moon, “Flame retardant coated polyolefin separators for the safety of lithium ion batteries,” Korean Journal of Chemical Engineering, vol. 33, pp. 285–289, 2016. View at Publisher · View at Google Scholar
  8. S. H. Park, K. S. Park, Y. K. Sun, K. S. Nahm, Y. S. Lee, and M. Yoshio, “Structural and electrochemical characterization of lithium excess and Al-doped nickel oxides synthesized by the sol–gel method,” Electrochimica Acta, vol. 46, pp. 1215–1222, 2001. View at Publisher · View at Google Scholar
  9. X. Li, Z. Xie, W. Liu, W. Ge, H. Wang, and M. Qu, “Effects of fluorine doping on structure, surface chemistry, and electrochemical performance of LiNi0.8Co0.15Al0.05O2,” Electrochimica Acta, vol. 174, pp. 1122–1130, 2015. View at Publisher · View at Google Scholar
  10. B. Huang, X. Li, Z. Wang et al., “Enhanced electrochemical performance in LiNi0.8Co0.15Al0.05O2 cathode material: Resulting from Mn-surface-modification using a facile oxidizing–coating method,” Materials Letters, vol. 115, pp. 49–52, 2014. View at Publisher · View at Google Scholar
  11. S. U. Woo, C. S. Yoon, K. Amine, I. Belharouak, and Y. K. Sun, “Significant Improvement of Electrochemical Performance of AlF3-Coated Li [ Ni0.8Co0.1Mn0.1] O2 Cathode Materials,” Journal of The Electrochemical Society, vol. 154, pp. A1005–A1009, 2007. View at Publisher · View at Google Scholar
  12. Y. Chen, Q. Jiao, L. Wang et al., “Synthesis and characterization of Li1.05Co1/3Ni1/3Mn1/3O1.95X0.05 (X = Cl, Br) cathode materials for lithium-ion battery,” Comptes Rendus Chimie, vol. 16, pp. 845–849, 2013. View at Publisher · View at Google Scholar
  13. W. Luo, F. Zhou, X. Zhao, Z. Lu, X. Li, and J. R. Dahn, “Synthesis, Characterization, and Thermal Stability of LiNi1/3Mn1/3Co1/3-z−MgzO2, LiNi1/3−zMn1/3Co1/3MgzO2, and LiNi1/3Mn1/3−zCo1/3MgzO2,” Chemistry of Materials, vol. 22, pp. 1164–1172, 2010. View at Publisher · View at Google Scholar
  14. P. Yue, Z. Wang, X. Li et al., “The enhanced electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials by low temperature fluorine substitution,” Electrochimica Acta, vol. 95, pp. 112–118, 2013. View at Publisher · View at Google Scholar
  15. B. Huang, X. Lin, Z. Wang, H. Guo, and X. Xiong, “Synthesis of Mg-doped LiNi0.8Co0.15Al0.05O2 oxide and its electrochemical behavior in high-voltage lithium-ion batteries,” Ceramics International, vol. 40, pp. 13223–13230, 2014. View at Publisher · View at Google Scholar
  16. W. Hua, J. Zhang, Z. Zheng et al., “Na-doped Ni-rich LiNi0.5Co0.2Mn0.3O2 cathode material with both high rate capability and high tap density for lithium ion batteries,” Dalton Transactions, vol. 43, pp. 14824–14832, 2014. View at Publisher · View at Google Scholar
  17. M. N. Ates, Q. Jia, A. Shah, A. Busnaina, S. Mukerjee, and K. M. Abraham, “Mitigation of layered to spinel conversion of a Li-Rich Layered metal oxide cathode material for Li-Ion batteries,” Journal of The Electrochemical Society, vol. 161, no. 3, pp. A301–A301, 2014. View at Publisher · View at Google Scholar
  18. Z. Q. Deng and A. Manthiram, “Influence of Cationic Substitutions on the Oxygen Loss and Reversible Capacity of Lithium-Rich Layered Oxide Cathodes,” Journal of Physical Chemistry C, vol. 115, no. 14, pp. 7097–7103, 2011. View at Publisher · View at Google Scholar
  19. H. Chen, J. A. Dawson, and J. H. Harding, “Effects of cationic substitution on structural defects in layered cathode materials LiNiO2,” Journal of Materials Chemistry A, vol. 2, pp. 7988–7996, 2014. View at Publisher · View at Google Scholar
  20. B. Huang, X. Li, Z. Wang, and H. Guo, “A facile process for coating amorphous FePO4 onto LiNi0.8Co0.15Al0.05O2 and the effects on its electrochemical,” Materials Letters, vol. 131, pp. 210–213, 2014. View at Publisher · View at Google Scholar
  21. C. T. Hsieh, H. H. Hsu, J. P. Hsu, Y. F. Chen, and J. K. Chang, “Infrared-assisted synthesis of lithium nickel cobalt alumina oxide powders as electrode material for lithium-ion batteries,” Electrochimica Acta, vol. 206, pp. 207–216, 2016. View at Publisher · View at Google Scholar
  22. S. Myung, S. Komaba, K. Hosoya, N. Hirosaki, Y. Miura, and N. Kumagai, “Synthesis of LiNi0.5Mn0.5-xTixO2 by an Emulsion Drying Method and Effect of Ti on Structure and Electrochemical Properties,” Chemistry of Materials, vol. 17, no. 9, pp. 2427–2435, 2005. View at Publisher · View at Google Scholar
  23. T. Ohzuku, A. Ueda, and M. Nagayama, “Electrochemistry and Structural Chemistry of LiNiO2 for 4 Volt Secondary Lithium Cells,” Journal of The Electrochemical Society, vol. 140, pp. 1862–1870, 1993. View at Publisher · View at Google Scholar
  24. G. T. K. Fey, J. G. Chen, V. Subramanian, and T. Osaka, “Preparation and electrochemical properties of Zn-doped LiNi0.8Co0.2O2,” Journal of Power Sources, vol. 112, pp. 384–394, 2002. View at Publisher · View at Google Scholar
  25. G. X. Wang, S. Zhong, D. H. Bradhurst, S. C. Dou, and H. K. Liu, “Synthesis and characterization of LiNiO2 compounds as cathodes for rechargeable lithium batteries,” Journal of Power Sources, vol. 76, pp. 141–146, 1998. View at Publisher · View at Google Scholar
  26. T. Ohzuku, A. Ueda, M. Nagayama, Y. Iwakoshi, and H. Komori, “Comparative study of LiCoO2, LiNi12Co12O2 and LiNiO2 for 4 volt secondary lithium cells,” Electrochimica Acta, vol. 38, no. 9, pp. 1159–1167, 1993. View at Publisher · View at Google Scholar
  27. D. Aurbach, K. Gamolsky, B. Markovsky et al., “Study of surface phenomena related to electrochemical lithium intercalation into LixMOy host materials (M = Ni, Mn),” Journal of The Electrochemical Society, vol. 147, no. 4, pp. 1322–1331, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Zhang, Z. B. Wang, J. Lei et al., “Investigation on performance of Li(Ni0.5Co0.2Mn0.3)1−xTixO2 cathode materials for lithium-ion battery,” Ceramics International, vol. 41, pp. 9069–9077, 2015. View at Publisher · View at Google Scholar
  29. H. Xie, K. Du, G. Hu, Z. Peng, and Y. Cao, “The Role of Sodium in LiNi0.8Co0.15Al0.05O2 Cathode Material and Its Electrochemical Behaviors,” Journal of Physical Chemistry C, vol. 120, pp. 3236–3241, 2016. View at Publisher · View at Google Scholar
  30. H. Kondo, Y. Takeuchi, T. Sasaki et al., “Effects of Mg-substitution in Li(Ni,Co,Al)O2 positive electrode materials on the crystal structure and battery performance,” Journal of Power Sources, vol. 174, no. 2, pp. 1131–1136, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. X. Li, F. Kang, W. Shen, and X. Bai, “Improvement of structural stability and electrochemical activity of a cathode material LiNi0.7Co0.3O2 by chlorine doping,” Electrochimica Acta, vol. 53, pp. 1761–1765, 2007. View at Publisher · View at Google Scholar
  32. C. H. Chen, J. Liu, M. E. Stoll, G. Henriksen, D. R. Vissers, and K. Amine, “Aluminum-doped lithium nickel cobalt oxide electrodes for high-power lithium-ion batteries,” Journal of Power Sources, vol. 128, no. 2, pp. 278–285, 2004. View at Publisher · View at Google Scholar
  33. G. Peng, X. Yao, H. Wan et al., “Journal of Power Sources,” Insights on the fundamental lithium storage behavior of all-solid-state lithium batteries containing the LiNi0.8Co0.15Al0.05O2 cathode and sulfide electrolyte, vol. 307, pp. 724–730, 2016. View at Publisher · View at Google Scholar
  34. G. Qian, L. Wang, Y. Shang et al., “Polyimide binder: a facile way to improve safety of lithium ion batteries,” Electrochimica Acta, vol. 187, pp. 113–118, 2016. View at Publisher · View at Google Scholar
  35. Q. C. Zhuang, X. Y. Qiu, S. D. Xu, Y. H. Qiang, and S. G. Sun, Diagnosis of Electrochemical Impedance Spectroscopy in Lithium-Ion Batteries. Chapter 8, 2012. View at Publisher · View at Google Scholar
  36. J. Huang, Z. Li, H. Ge, and J. Zhang, “Analytical solution to the impedance of electrode/electrolyte interface in lithium-ion batteries,” Journal of The Electrochemical Society, vol. 162, pp. A7037–A7048, 2015. View at Publisher · View at Google Scholar